|
User Manual for PGYTECH Accessories Combo for DJI Mavic Air Click to enlarge the picture
Contents of the user manual for the PGYTECH Accessories Combo for DJI Mavic
- Product category: DJI Accessories PGYTECH
- Brand: PGYTECH
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for PGYTECH DJI Accessories
 |
User manual for the PGYTECH Accessories Combo for DJI Mavic contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any PGYTECH product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official PGYTECH user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a PGYTECH product will considerably shorten its lifespan!
|
Product description Enhance your DJI Mavic Air with an Accessories Combo from PGYTECH. Included in this pack are a landing pad and landing gear extensions for safe takeoff and landing, a UNF series CA3 skin for a fresh new look, a set of six UV, ND, and CPL filters for capturing great shots in a variety of lighting conditions, and a lens hood for keeping glare at bay. For the controller, there is a clasp with a lanyard so it can hang snugly around your neck, and a control stick protector so it can travel safe inside your backpack. - Landing Pad Pro for Drones Wherever you may be, take off and land safely with the Landing Pad Pro for Drones from PGYTECH. With its orange/blue-and-white design, this double-sided landing pad highlights your exact target landing location so you can touch down neatly without exposing your drone to the perils of rough terrain. Additionally, the pad prevents debris from being blown into your drone's camera or gimbal during takeoff and landing. Included with the pad are reflective stripes for enhanced visibility, as well as a carry pouch.
- For small to midsize drones
- Mold- and mildew-resistant
- High-precision, UV-resistant printing
- Easy-to-fold, portable design
UPC: 843225102025 - 6-Filter Set for DJI Mavic Air Camera (UV, ND4/8/16/32 & CPL) The 6-Filter Set for DJI Mavic Air Camera from PGYTECH includes a UV filter, ND4, 8, 16, 32 filters, and a CPL filter. The UV filter reduces haze and improves image contrast by minimizing the amount of ultraviolet light. The ND filters reduce the amount of light reaching the sensor without affecting the color, and enable slower shutter speeds under strong sunlight exposure.
The CPL filter removes unwanted reflection from nonmetallic surfaces like water or glass, as well as glare from the sun. It increases color saturation, creating rich scenic images and helps reduce the amount of light entering the lens. The frames of the filters are made of high-precision CNC aviation aluminum and feature multi-layer coated optical glass. UPC: 843225102186 - Gimbal Lens Hood for DJI Mavic Air The Gimbal Lens Hood for DJI Mavic Air from PGYTECH is designed to help prevent unwanted light from affecting image quality. It helps to minimizes vignetting, undesirable color effects, and glare. It also provides a measure of physical protection for the camera during takeoff and landings, thanks to the molded plastic edges extending past the gimbal. The lens hood has been engineered to snap easily into place thanks to its pressure clipping system, which does not require any additional tools or parts. UPC: 843225102605
- Remote Controller Clasp for DJI Mavic Air Fly your DJI Mavic Air without having to hold the controller with the Remote Controller Clasp from PGYTECH. The clasp consists of a small stainless steel bracket and an adjustable lanyard, enabling you to wear the controller around your neck while flying your Mavic Air drone.
The steel bracket snaps around the controller, leaving plenty of room to access the USB port and controller sticks, as well as keeping the mobile device clamps clear. The bracket ring connects to a quick release button on the lanyard so you can quickly disconnect from the controller. - Landing Gear Riser Extensions for DJI Mavic Air The Landing Gear Riser Extensions from PGYTECH are designed for the DJI Mavic Air drone to raise it 1.4" allowing you to land and take-off from any terrain. They prevent damaging the camera gimbal and staining the drone. These riser extensions fit precisely and snap to the fuselage, without the need to use tools or screws. Soft silica gel cushion pads decrease the vibrations when landing and prevent the risers from falling off during flight.
- Quick installation and removal design
- Landing gear extensions and DJI propeller guard can be used at the same time
UPC: 843225102094 - Control Stick Protector for DJI Mavic Air Remote Protect your DJI Mavic Air remote controller and its control sticks using the Control Stick Protector from PGYTECH. The lightweight plastic protector is custom-molded for the Mavic Air controller to place over its two thumb control sticks, protecting them from damage during storage and transport in a bag, case, or backpack. UPC: 843225102063
- Skin for DJI Mavic Air - UNF Series CA3
In the Box Bundle Items Landing Pad Pro for Drones vsassqxqxdtqavazbv - Sheet of Reflective Stripes
Skin for DJI Mavic Air - UNF Series CA3 6-Filter Set for DJI Mavic Air Camera (UV, ND4/8/16/32 & CPL) Gimbal Lens Hood for DJI Mavic Air vsassqxqxdtqavazbv Remote Controller Clasp for DJI Mavic Air Landing Gear Riser Extensions for DJI Mavic Air Control Stick Protector for DJI Mavic Air Remote Table of Contents
|
Upload User Manual
Have you got an user manual for the PGYTECH Accessories Combo for DJI Mavic Air in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Landing Pad Pro for Drones
| Material | Polyurethane | | Compliance | RoHS | | Dimensions | Open: 19.7 x 19.7" / 50 x 50 cm
Folded: 9.8 x 6.7" / 25 x 17 cm | | Weight | 12.4 oz / 352 g | | | | Box Dimensions (LxWxH) | 11.35 x 6.9 x 1.0" | - Skin for DJI Mavic Air - UNF Series CA3
| | | Box Dimensions (LxWxH) | 6.4 x 4.9 x 0.3" | - 6-Filter Set for DJI Mavic Air Camera (UV, ND4/8/16/32 & CPL)
| Compatibility | DJI Mavic Air camera | | Material | Lens: Optical glass
Frame: Aviation aluminum-alloy | | | | Box Dimensions (LxWxH) | 3.1 x 3.05 x 0.85" | - Gimbal Lens Hood for DJI Mavic Air
| Construction Material | ABS Plastic | | Dimensions | 2.8 x 1.1 x 2.0" / 7.2 x 2.7 x 5.0 cm | | Weight | 0.1 oz / 3.0 g | | | | Box Dimensions (LxWxH) | 3.8 x 1.9 x 1.0" | - Remote Controller Clasp for DJI Mavic Air
| Compatibility | DJI Controller for Mavic Air | | Material | Bracket: Stainless Steel | | Weight | 0.7 oz / 19 g | | | | Box Dimensions (LxWxH) | 2.75 x 2.05 x 1.3" | - Landing Gear Riser Extensions for DJI Mavic Air
| Material | ABS, silica gel | | Weight | 18 g / 0.6 oz | | | | Box Dimensions (LxWxH) | 5.85 x 3.4 x 1.05" | - Control Stick Protector for DJI Mavic Air Remote
| Compatibility | DJI Mavic Air Remote Controller | | Material | ABS Plastic | | Dimensions | Not Specified by Manufacturer | | Weight | 0.6 oz / 17 g | | | | Box Dimensions (LxWxH) | 6.4 x 1.95 x 1.2" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 22 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
| Discussion |
Latest contributions to the discussion:
TR-P5TP pink robot dog
Name: Allyson
Top Race Race & Remote Control
Hello we are having issues with the remote to the robot dog it just flashes a red light will not sync to the robot dog what so ever the dog is charged and batteries have been changed out more the once, Can i get help trouble shooting the issue or if something needs to be sent bac...
Query
Name: Libba Guyton
Canon Pixma TS9520 Wireless All-In-One Printer
Support Code 1851
Multi purpose tray guide is open. Close the guide and press OK.
Done and the same message continue to appear....
Manual
Name: Grant
Konus KonuStart-700B 60mm f 11.6 Refractor
Please send user manual for Konustart-700B to above email address....
Fs3x manual
Name: Randy Reid
DigiTech FS3X Three-Function Foot Switch
I need manual
...
adding additional chime
Name: Stan Stansfield
OhmKat Video Doorbell Power Supply for
The additional chime does not work and is closure to the transmitter then the first one. I plugged in the additional chime and set the volume and chime. The original chime works when the additional chime is plugged in to new location. The original chime is located further away bu...
|
|
