User Manual for Photo Video Wireless Lavalier Accessory Kit Click to enlarge the picture
Contents of the user manual for the Photo Video Wireless Lavalier Accessory Kit
- Product category: Lavalier Windscreens & Covers B&H Photo Video
- Brand: B&H Photo Video
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for B&H Photo Video Lavalier Windscreens & Covers
|
User manual for the Photo Video Wireless Lavalier Accessory Kit contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any B&H Photo Video product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official B&H Photo Video user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a B&H Photo Video product will considerably shorten its lifespan!
|
Product description Offered only by B&H, this Wireless Lavalier Accessory Kit provides you with an assortment of accessories useful to enhance the quality of your audio recordings and maximize the functionality of your wireless lavalier microphones, whether working in the studio or outdoors on location.It comprises two Auray lavalier clips designed to hold your microphone securely in place and free from cable noise, a 3-pack of Auray foam windscreens to help reduce wind noise without muffling your sound, four rechargeable large-capacity Watson AA batteries with their charger to keep your wireless transmitter and receiver working long hours, and an XLR cable in case you need to run your microphone wired.Safely store and transport your entire wireless system, lavalier microphone, and accessories using the included lightweight and rugged carrying case from Gator Cases. - Gator Cases GM-1W Wireless Mobile Pack The Gator Cases GM-1W Wireless Mobile Pack (Black) is a 600 denier nylon case with interior padding. It is designed to carry and protect an entire single wireless system. The zippered case reveals sufficient space for lavalier microphones, cables and accessories. The foam padded interior protects the gear from shock while remaining lightweight and rugged. The receiver is functional while still in the bag. The front and back unzip for easy access. The bag is carried by a removable, adjustable shoulder strap and padded carrying handles.
- Construction
-
- 600 denier nylon
- Foam padded interior
- Zipper closure
- Access for antenna to be extended while in the case
- Space for lavalieres, cables and wireless mic with transporter
- Mounted front and rear access unzips for easy set up in the field
- Carrying options
-
- Removable, adjustable shoulder strap
- Padded carrying handles
- Compatible with most single microphone wireless systems
UPC: 716408503424 - Kopul Premium Performance 3000 Series XLR M to XLR F Microphone Cable - 20' (6.1 m), Black The black Kopul Premium Performance 3000 Series XLR M to XLR F Microphone Cable (20') is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and to provide protection against EMI, RFI, and static noise. While the cable's color-coding affords the ability to quickly differentiate between multiple connections on stage, it provides a pleasant aesthetic quality at the same time.
Premium Performance 3000 Series cables are made from 24-AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection. - 95% dual-spiral shielding offers protection from EMI and RFI noise
- Twin conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable's signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable's core
- 24-AWG oxygen-free stranded copper inner core provides the best possible conductivity
- Cotton yarn reduces electrostatic and microphonic noise
- All solder points shrink-wrapped for protection
- Neutrik XX silver connectors offer high conductivity
- Caged type contact and improved ground contact
UPC: 847628558304 - Watson MX 4-Hour Rapid Charger and 4 MX AA NiMH Batteries Power up your photo equipment, flashlights, gaming devices, and other electronics via the Watson MX 4-Hour Rapid Charger with 4 MX AA NiMH Batteries. The 1.2V, 2550mAh nickel-metal hydride cells are pre-charged, rechargeable up to 500 times, and capable of retaining 85% of their capacity after 1 year in storage. The Rapid unit will charge 4 of them in about 310 minutes, or 2 in about 160 minutes. It's also compatible with optional AA NiCd batteries, or AAA NiMH or NiCd cells.
The charger's integrated micro-controller ensures that each battery is charged to its full capacity, and an automatic cut-off feature prevents overcharging. Should the controller and automatic cut-off functions both fail, the safety guard timer will kick in to ensure that power is still shut off after 6 hours. Additionally, the charger features protection against short circuits and reverse polarity. Two charging channels are individually monitored, and two LED indicators display battery status. In order to enable use all over the world, the charger runs on 100-240 VAC power. As a bonus, its compact outlet prongs can fold inwards, making the unit more compact for storage and travel. UPC: 847628599529 - Auray WLF-038-3R Foam Windscreens for 3/8" Diameter Microphones (Round Shape, 3 Pack) The Auray WLF Series Foam Windscreens are designed to reduce unwanted vocal pops and broadband wind noise with minimal high frequency loss. This round shaped WLF-038-3R Foam Windscreen is designed for use with headset, podium and lavalier mics with a 3/8" diameter. The density of the specialty acoustic foam is optimized to help protect the microphone element from air bursts without muffling the sound. Whether used on headset, podium or lavalier microphones, these windscreens are effective in minimizing wind noise and plosive sounds. They are most effective in calm to light breeze conditions (0-7mph), and can be used indoors for protection against drafts caused by air-conditioners. Users can generally expect a notable reduction in wind noise, with very slight dampening of high frequencies. For most applications, this is a worthwhile exchange. The WLF-038-3R's foam is hypoallergenic and helps prevent moisture and dirt from damaging your microphone. The windscreens are designed to fit microphones from AKG, Audio-Technica, Audix, Beyerdynamic, Electro-Voice, Sennheiser, Sony, Shure and others. The WLF-038-3R Foam Windscreens for 3/8" Diameter Microphones are an effective solution for basic wind protection.
Fits these and other similar sized microphones: - Sony: ECM44, ECM55, ECM66, ECM166
- Audio-Technica: AT803B, AT853, AT855, AT857, AT859, ATM35
- Shure: MX183, MX184, MX185, MX412, SM83, SM84, SM98, SM99, 839W, EZG, EZO
- Audix: ADX20, ADX112, ADX118
- Beyerdynamic: MCE10, MCE52, SHM 22, SHM 88
- Electro-Voice: CH230, Co90, Co94, Co100, CP212, CP218, CS200, RE98
UPC: 847628563018 - 2 x Auray Microphone Clip (Black) This Auray Microphone Clip is a solution for lavalier (clip-on) microphone cables measuring 0.06 - 0.09" (1.5 - 2.2mm) in diameter. The clip accommodates one microphone and is ideal for both wireless and wired applications. The clip grips the cable and swivels, which provides greater flexibility in the positioning of the microphone. Note: Never force the clip onto the cable, use with care.
Fits: UPC: 847628562820 In the Box - Gator Cases - GM-1W Wireless Mobile Pack vxdctbsedyee
- Shoulder Strap
- Lifetime Warranty for First Owner
- Kopul - Premium Performance 3000 Series XLR M to XLR F Microphone Cable - 20' (6.1 m), Black
- Watson - MX 4-Hour Rapid Charger and 4 MX AA NiMH Batteries
- Auray - WLF-038-3R Foam Windscreens for 3/8" Diameter Microphones (Round Shape, 3 Pack)
- 2 x Auray - Microphone Clip (Black)
Table of Contents
|
Upload User Manual
Have you got an user manual for the Photo Video Wireless Lavalier Accessory Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Gator Cases GM-1W Wireless Mobile Pack
| Material | Exterior: 600 denier nylon
Interior: Foam padded | | Type of Closure | Zippers | | Exterior Dimensions | 15.35 x 5.0 x 11.42" (38.99 x 12.7 x 29cm) (LxDxH) | | Interior Dimensions | 8.5 x 2.0 x 8.5" (21.59 x 5.08 x 21.59cm) (LxDxH)
Mic Drops: 8.25" (20.96cm) | | Carrying/Transport Options | Shoulder strap
Padded carrying handles | | Weight | 4.4 lbs (2.0kg) | | | | Box Dimensions (LxWxH) | 14.724 x 10.315 x 4.882" | - Kopul Premium Performance 3000 Series XLR M to XLR F Microphone Cable - 20' (6.1 m), Black
| Connector 1 | 3-Pin XLR Male | | Connector 2 | 3-Pin XLR Female | | Cable Length | 20' / 6.1 m | | Shielding | 95% Spiral | | Wire Gauge | 24 AWG | | Contact Plating | Silver | | | | Box Dimensions (LxWxH) | 8.6 x 7.0 x 0.4" | - Watson MX 4-Hour Rapid Charger and 4 MX AA NiMH Batteries
| | | Configuration | 2 or 4 x AA or AAA NiMH or NiCd batteries | | Input Voltage | 100-240 VAC, 50/60 Hz | | Output Voltage | 2.8 VDC, 500 mAh | | Charging Time | 4 x AAA 950 mAh: About 190 minutes
2 x AAA 950 mAh: About 95 minutes
4 x AA 2550 mAh: About 310 minutes
2 x AA 2550 mAh: About 160 minutes | | Operating Temperature | 32 to 113°F / 0 to 45°C | | Dimensions | 2.7 x 1.3 x 4.3" / 6.9 x 3.3 x 10.9 cm | | Weight | 2.8 oz / 79.4 g | | | | Quantity | 4 x | | Size | AA | | Chemistry | NiMH (nickel-metal hydride) | | Capacity | 2550 mAh | | Output Voltage | 1.2 V | | Durability | Rechargeable up to 500 times | | Temperature Range | Down to -4°F / -20°C | | | | Box Dimensions (LxWxH) | 7.8 x 4.1 x 0.4" | - Auray WLF-038-3R Foam Windscreens for 3/8" Diameter Microphones (Round Shape, 3 Pack)
| Compatible Mic Diameter | 0.38" / 9.5 mm | | Material | Foam | | | | Box Dimensions (LxWxH) | 3.1 x 3.1 x 1.0" | - 2 x Auray Microphone Clip (Black)
| | | Box Dimensions (LxWxH) | 3.0 x 2.35 x 0.2" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 55 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
