|
User Manual for Photoflex LiteReach Plus with 39 x 39" LitePanel Kit Click to enlarge the picture
Contents of the user manual for the Photoflex LiteReach Plus with 39 x
- Product category: Butterfly & Panel Reflector Kits Photoflex
- Brand: Photoflex
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Photoflex Butterfly & Panel Reflector Kits
|
User manual for the Photoflex LiteReach Plus with 39 x contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Photoflex product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Photoflex user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Photoflex product will considerably shorten its lifespan!
|
Product description The LiteReach Plus with 39 x 39" LitePanel Kit from Photoflex is a suitable solution for diffusing harsh sunlight when shooting on location. It consists of a LightPanel translucent diffuser and a LightReach support pole.The LiteReach Plus extends from 35.5" to 9.6' and can hold a maximum vertical load of 15.0 lb. When holding the pole and diffuser, the balance ball at the bottom of the pole allows you to comfortably place the weight of the kit against your hip. The LitePanel attaches to the end of the support pole, allowing you to hold the diffuser above the subject, providing a softer light than the direct sunlight. The frame folds down to 39 x 3" and is held together with internal bungee cords, making it easy to break down and set up. The quick-release rail system features a modular mounting plate for a variety of mounting options and fast setup. A polyester carrying bag is included to transport the kit. - Frame for Litepanel Frame/Panel Reflectors - 39x39" Photoflex LitePanel Frames are designed with the demanding professional photographer in mind and are unlike any other panels on the market. This is a 39 x 39" aluminum frame only, which will hold in place an assortment of Photoflex panels, available separately.This frame is available as a part of different kits.
- Shock-cord runs inside the tubing -- provides fast set-up and tear down.
- Aluminum - will not warp, and will stand up to abuse.
- Square-tube design resists twisting of the frame and gives you a more secure surface for clamps and other holders.
- Rounded corners ease adjustment of the frames when two or more are attached together.
UPC: 799245003715 - LitePanel Translucent Fabric Diffusion (39 x 39") Designed for use with the LitePanel 39 x 39" frame, the LitePanel Translucent Fabric Diffusion from Photoflex produces a broad light source and subtly reduces contrast. It subdues light intensity, and is useful for portraiture and other instances where a large, soft light source is required. The fabric is fitted with elastic corners for quick and secure attachment to the frame. UPC: 799245003562
- LitePanel Accessory Carry Bag (Black) Get ready for your next location shoot with the black LitePanel Accessory Carry Bag from Photoflex. This bag is designed to accommodate your LS-B2218, LS-B2214, LS-B2211, or LS-B2200 LitePanel light stand. It may also be used to hold other gear such as reflectors, discs, and other LitePanel accessories. The bag features zipper closure, dual strap handles, and has a zippered side pocket for small stuff. At only 2 lb, the bag is easy to carry and is constructed from durable 600D nylon. UPC: 799245003494
- LitePanel Mounting Hardware Kit The Photoflex LitePanel Mounting Hardware Kit is designed to allow hands-free use of any of the LitePanels polycarbonate or aluminum frames as well as hands-on use via a LiteReach handheld extension arm. The kit included a heavy-duty swivel with an umbrella shaft channel and hardware to hold the frames or extensions.
-
- All metal construction
- Unique, reversible modular mounting plate to facilitate a variety of mounting options
- Quick-release rail system for fast and secure assembly
- Quick-release heavy duty tilt bracket
UPC: 799245015848 - LiteReach Plus The Photoflex LiteReach Plus is a heavy duty three-section support that allows you to hold a Photoflex LitePanel, umbrella or softbox up to 9.6' above your subject. Shooting outdoors, especially in mid-day sun is a tough contrast situation for the photographer and a hot, physically uncomfortable one for the subject. With separate purchase of the LitePanel Mounting Hardware Kit (PHLPFHK) you'll be able to hold LitePanel frames with diffusion material up to 39 x 72" over your subject to obtain soft, manageable contrast.You can get a similar effect using a large white umbrella in place of the LitePanel. You'll need an optional Multiclamp with Shoe Mount (B&H# PHMCUSM)or a Heavy Duty Swivel (B&H# PHSM) mounted to the LiteReach Plus' 5/8" top stud to hold the umbrella. You can also use these products to support a softbox. With a maximum tubing diameter of 1.37", the LiteReach Plus has enough heft to handle a 15 lb vertical load at its full extension Comfort and ergonomics are key to the LiteReach's design. The large rubberized balance ball allows you to shift the weight of your gear to your hip or to the ground, while two hand grips are located at ideal spots on the shaft to facilitate single-handed or two-handed direction of the LitePanel, umbrella or softbox.
- Extra long four section boom pole to facilitate resting the base on the ground using the proprietary Balance Ball technology.
- All aluminum alloy heavy duty construction.
- Oversized tubing for maximum strength when extended.
UPC: 799245015862 In the Box Bundle Items Frame for Litepanel Frame/Panel Reflectors - 39x39" ueccrqstdxxbctrztzettvct - 5 Year Manufacturer's Warranty
LitePanel Translucent Fabric Diffusion (39 x 39") LitePanel Accessory Carry Bag (Black) LitePanel Mounting Hardware Kit - Heavy-Duty Grip Swivel (2.5")
LiteReach Plus
Also Includes - LiteReach Plus, LitePanel Frame and LitePanel Hardware: Limited 5-Year Warranty
- LitePanel Fabric: Limited 3-Year Warranty
- LitePanel Carrying Bag: Limited 1-Year Warranty
Table of Contents
|
Upload User Manual
Have you got an user manual for the Photoflex LiteReach Plus with 39 x 39" LitePanel Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Frame for Litepanel Frame/Panel Reflectors - 39x39"
| Frame Size | 39 x 39" (99 x 99 cm), Aluminum | | | | Box Dimensions (LxWxH) | 39.5 x 3.4 x 2.5" | - LitePanel Translucent Fabric Diffusion (39 x 39")
| Dimensions | 39 x 39" / 99.1 x 99.1 cm | | Weight | 1 lb / 453.6 g | | | | Box Dimensions (LxWxH) | 12.5 x 7.15 x 1.35" | - LitePanel Accessory Carry Bag (Black)
| Material | 600D fabric shell | | Type of Closure | Zipper | | Carry/Transport Options | Dual strap handles | | Padded | No | | Carrying/Transport Options | Double loop handle | | Dimensions | Inside: 40.75 x 6.25" / 103.50 x 15.87 cm
Outside: 41 x 6.5" / 104.14 x 16.51 cm | | Weight | 2.0 lb / 0.9 kg | | | | Box Dimensions (LxWxH) | 14.7 x 11.5 x 2.3" | - LitePanel Mounting Hardware Kit
| Construction | Aluminum | | Attachment | 5/8" (16 mm) Receiver for stand or LiteReach extension | | Dimensions | Upper cover: 2.3 x 2.3 x 1.6" (6.0 x 6.0 x 4.0 cm)
Swivel: 2.5" (6.35 cm) grip surface diameter | | Kit Weight | 1.7 lb (0.77 kg) | | | | Box Dimensions (LxWxH) | 7.1 x 6.0 x 3.6" | - LiteReach Plus
| Load Capacity | Maximum vertical load: 15 lb (6.8 kg) | | Dimensions | Collapsed length: 35.5" (90.17 cm)
Extended length: 9.6' (291 cm)
Maximum tubing size: 1.37" (35 mm)
Top stud diameter: 5/8" (16 mm) | | Weight | 4.0 lb (1.8 kg) | | | | Box Dimensions (LxWxH) | 36.0 x 3.8 x 3.8" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 95 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
| Discussion |
Latest contributions to the discussion:
TR-P5TP pink robot dog
Name: Allyson
Top Race Race & Remote Control
Hello we are having issues with the remote to the robot dog it just flashes a red light will not sync to the robot dog what so ever the dog is charged and batteries have been changed out more the once, Can i get help trouble shooting the issue or if something needs to be sent bac...
Query
Name: Libba Guyton
Canon Pixma TS9520 Wireless All-In-One Printer
Support Code 1851
Multi purpose tray guide is open. Close the guide and press OK.
Done and the same message continue to appear....
Manual
Name: Grant
Konus KonuStart-700B 60mm f 11.6 Refractor
Please send user manual for Konustart-700B to above email address....
Fs3x manual
Name: Randy Reid
DigiTech FS3X Three-Function Foot Switch
I need manual
...
adding additional chime
Name: Stan Stansfield
OhmKat Video Doorbell Power Supply for
The additional chime does not work and is closure to the transmitter then the first one. I plugged in the additional chime and set the volume and chime. The original chime works when the additional chime is plugged in to new location. The original chime is located further away bu...
|
|
