|
User Manual for Photogenic StudioMax III 3-Light Portrait Studio Kit Click to enlarge the picture
Contents of the user manual for the Photogenic StudioMax III 3-Light Portrait Studio
- Product category: Monolights Photogenic
- Brand: Photogenic
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Photogenic Monolights
|
User manual for the Photogenic StudioMax III 3-Light Portrait Studio contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Photogenic product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Photogenic user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Photogenic product will considerably shorten its lifespan!
|
Product description The Photogenic StudioMax III 3-Light Portrait Studio Kit offers a full 6 F-Stop power rangeThis light is an excellent choice as a main, secondary, or background light. Since it accepts the entire line of the PowerLight reflectors, grids, snoots, and diffusers, the StudioMax III is a good investment.This lighting kit provides a total of 800 w/s by way of 2- 320 w/s and 1- 160 w/s units.It also includes umbrellas for softening and broadening the light output, air cushioned light stands for support, and a soft, padded case for storage and transport. - Photogenic AKC160 Studiomax III 160W/s Monolight The Photogenic AKC160 Studiomax III 160W/s Monolight is an ideal way to add a lightweight (2.6 lb) fixture to your kit for a main light, backlight or fill light. The AKC160 offers a six stop power range from 5.0 to 160W/s, steplessly adjustable via a simple knob. Constant Color technology ensures that the color balance remains within 200K of an ideal 5,400K regardless of the power level chosen, to insure shot to shot consistency and minimize post-production work. The AKC160 comes with a UV color corrected, user-replaceable flash tube that renders fabrics and flesh tones accurately. The monolight comes with a 7.5" high-gain reflector but accepts the entire line of Photogenic Quick-Change reflectors, grids, snoots, and diffusers. An AC cord, sync cord, 100W quartz modeling lamp and a protective cap are also included.
- Six Stop Power Range
- Power levels, accessed on the rear panel, are adjustable from 5.0 to 160W/s with a simple twist of a knob
- Fast Recycling
- The AKC160 recycles to full power (160W/s) in only 1.5 seconds, and 0.5 sec. at minimum power to catch even the most fleeting gestures
- Modeling Light
- The AKC160's 100W quartz modeling light allows you to preview the effect of your lights before tripping the shutter
- Low Trigger Voltage
- Digital cameras can be used with Photogenic monolights without fear of damage to the camera's electronics
- User Replaceable UV Flashtube
- Replacing this "plug & play" flashtube is a snap. The UV coating ensures clean whites and flattering flesh tones
- Ready Indication
- A ready light lets you know when the flash is fully charged
- Power off Auto-discharge
- As a safety precaution, the AKC160 drains the capacitors when you turn it off
- Surge Protection
- The AKC160 incorporates surge protection to handle power spikes
- System Compatibility
- The AKC160 is compatible with all Photogenic Quick-Change light shaping accessories
UPC: 689670111195 - 2 x Photogenic AKC320 StudioMax III 320 Watt/Second Constant Color Monolight (120VAC) The Photogenic StudioMax III AKC320 constant color monolight offers a full six f/stop power range over 320 watt/seconds. It has internal control to ensure the same Kelvin temperature output, no matter what level of output is chosen.This light is an excellent choice as a main, secondary, or background light. Since it accepts the entire line of the PowerLight reflectors, grids, snoots, and diffusers, the StudioMax III is a good investment.This monolight also comes in an AC/DC model, which allows use of the light away from sources of AC power, when a high voltage battery is added.
- 6 F-Stop Power Range
- Dial provides infinite flash power settings from full to 1/32 power.
- Built In Slave
- Highly sensitive, switchable optical slave for synchronization with other flashes.
- Modeling Light
- Independently Switched, to aid in positioning and focus.
- User Replaceable Flashtube
- No tools are required to replace this "plug & play" flashtube.
- Compact Design
- Easy to transport. Umbrella socket and stand mount built on.
UPC: 689670111171 - 2 x Impact Heavy-Duty Air-Cushioned Light Stand (Black, 9.5') This Impact Heavy-Duty Air-Cushioned Light Stand is a black anodized aluminum support that rises to a height of 9.5' and folds down to 42" for storage and transport. The stand will handle up to 22 lb and is topped with a removable 5/8" spigot with 1/4"-20 and 3/8"-16 threads. It has a wide footprint of 52" for greater stability. Air cushioning gently lowers the light when making height adjustments to protect equipment and fingers.
- Air-Cushioned
- Protects equipment and fingers from damage
- Compact Design
- Will fit easily into most location cases
- Accepts Casters
- For easy positioning of lights
UPC: 847628012004 - Impact Two Section Back Light Stand (3') This 3' Impact Back Light Stand consists of a base and riser. Use the lower part as a base to place a mounted light at floor or table level, as low as 5.5". Add the extension to the base to raise the height of the light from 22.8" (57.9 cm) to a maximum of 3' (90 cm). The stand is constructed of black anodized aluminum.
- Quick Set Up
- Sets up easily in the matter of seconds
- Very Stable
- Stable under recommended loads
- 5/8" Reversible Stand Mount
- Fitted with a reversible 5/8" top stud, with 1/4"-20 and 3/8" threads
UPC: 847628011939 - Photogenic Shallow Satin Reflector The ability to shape and control the light from a flash source is essential. This is one of many different reflectors available for the Photogenic line of flash heads and monolights. It is used for lighting a background evenly, and softly. UPC: 689670070188
- Impact Light Kit Bag #2 (34 x 13.5 x 12") The black Light Kit Bag #2 (34 x 13.5 x 12") from Impact makes transporting your lighting kit easy and secure. The bag is designed to hold three monolights along with their reflectors (such as Impact VC500LR), four stands, boom, umbrellas, cables and other support gear but can also be used to hold other lighting equipment instead. You'll have plenty of room to take along enough lighting gear for a portrait session - all packed in an organized and accessible way. A touch fastened divider tray separates the stands, boom and umbrellas from the lights preventing them from bumping together and causing scratches or damage. For additional smaller equipment such as cables and small accessories, there are three interior 10.5 x 8.0" zippered mesh pockets.The bag is made from soft, padded water-resistant nylon and contains six movable touch fastened interior dividers (6 large, 2 small) that will permit you to configure the bag to accommodate the gear you need that day. The Light Kit Bag is carried by its two 2" wide overlapping top carry handles that can easily be extended into dual shoulder straps. The contents are accessed via dual zippers that when placed together will accept a user-supplied lock. For even more protection, the bottom of the bag contains three rubber feet for when the bag is placed on the ground. And the bag folds down to a quarter of its height for convenient storage and easy setup. Whether for storage or transport, the Impact Light Kit Bag will serve both pro or amateur well.
- The soft padded carry case is designed to hold three monolights with reflectors, four light stands, umbrellas, cables and other accessories
- The interior has six movable, touch fastened dividers that permit you to configure the bag to suit your needs; dividers consist of six large and two smaller styles
- 2" (5.1 cm) wide overlapping dual carry handles that convert to a shoulder strap
- Interior has three zippered 10.5 x 8.0" mesh pockets (26.7 x 20.3 cm)
- Touch fastened protective nylon tray separates light stands and umbrellas from monolights
- Water-resistant padded nylon construction
- Folds down to less then 4" for convenient storage and easy setup
- Dual zippered opening; accepts user-supplied lock
UPC: 847628030619 - 2 x Impact White Translucent Umbrella (43") Umbrellas soften, broaden, and diminish the light output of any flash light source. Umbrellas with a white interior will soften and weaken light more than an umbrella with a silver lining. A white umbrella without a black backing may also be used as a makeshift softbox, although the use of the light will not be as efficient as with a lightbox.Choosing umbrella size is determined by the size of the subject, and the strength of the light supply being used. Choosing an umbrella surface is as subjective as choosing a paint and brush.This Impact 43" White Translucent Umbrella is suggested for use in mid-length portraits for one or two persons. UPC: 847628013292
In the Box - AKC160 Studiomax III 160W/s Monolight uwaqavvsf
- ESR (100W/120V) Lamp
- 7-1/2" High Gain Reflector
- C4-12C Color Corrected Flash Tube
- AC Line Cord - 110V, for PL and PM
- Protective Cap for Powerlight
- PC to Mini Sync Cord - 10' (3m)
- Limited 1-Year Warranty
- 2 x AKC320 StudioMax III 320 Watt/Second Constant Color Monolight (120VAC)
- 2 x Impact - Heavy-Duty Air-Cushioned Light Stand (Black, 9.5')
- Impact - Two Section Back Light Stand (3')
- Quick Change Shallow Satin Reflector for Photogenic
- Impact - Light Kit Bag #2 (34 x 13.5 x 12")
- 2 x Impact - Umbrella - White Translucent (43") uwaqavvsf
Table of Contents
|
Upload User Manual
Have you got an user manual for the Photogenic StudioMax III 3-Light Portrait Studio Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Photogenic AKC160 Studiomax III 160W/s Monolight
| Maximum Power | 5 to 160 Ws | Power Control | 6 Stops | Guide Number | 25' / 7.6 m at 10' / 3 m, ISO100 81' / 24.7 m at 10' / 3 m, ISO100 with Reflector | Flash Duration | 1/7400 to 1/175 Sec | Recycle Time | 0.1 to 1.5 Sec () | Color Temperature | 5400K ± 200K | Flash Ready Indicator | Visual | Reflector | Changeable | Accessory Fitting Type | Photogenic | | Type | Tungsten | Wattage | 100 W | | Sync Type | Optical | Interface | PC Sync (3.5 mm) | Sync Voltage | 5 V | | AC Input Voltage | 105to125 VAC, 60 Hz | Current | 3 A (Operating) 5 A (Charging) 1 A (Idle) | Circuit Protection | Fuse | Fuse | 8 A | | Display | None | Mount | 5/8" / 16 mm Receptacle | Auto Dump | No | Fan Cooled | No | Dimensions | H: 5.2 x W: 5.2 x L: 7.0" / H: 13.3 x W: 13.3 x L: 17.8 cm | Weight | 2.6 lb / 1.17 kg | | Box Dimensions (LxWxH) | 12.8 x 10.35 x 10.2" | - 2 x Photogenic AKC320 StudioMax III 320 Watt/Second Constant Color Monolight (120VAC)
| Maximum Power | 10 to 320 Ws | Power Control | 6 Stops | Guide Number | 170' / 51.8 m at | Flash Duration | 1/4300 to 1/125 Sec | Recycle Time | 0.2 to 3 Sec () | Flash Ready Indicator | Visual | Reflector | Changeable | Accessory Fitting Type | Photogenic | | Type | Tungsten | Wattage | 100 W | | AC Input Voltage | 105to125 VAC, 60 Hz | Current | 5 A (Operating) | Circuit Protection | Fuse | | Display | None | Auto Dump | No | Fan Cooled | No | Dimensions | H: 4.5 x W: 4.5 x L: 8.8" / H: 11.0 x W: 11.0 x L: 22.0 cm | Weight | 3.0 lb / 1.36 kg | | Box Dimensions (LxWxH) | 12.677 x 10.394 x 10.236" | - 2 x Impact Heavy-Duty Air-Cushioned Light Stand (Black, 9.5')
Maximum Load | 22 lb (10 kg) | Maximum Height | 114" (290 cm) | Minimum Height | 48" (123 cm) | Closed Length | 42" (106.7 cm) | Footprint Diameter | 52" (132 cm) | Leg Tip | 0.98" (25 mm) | Attachment Size | Removable 5/8" (16 mm) spigot with 1/4"-20 and 3/8"-16 threaded ends | Accepts Wheels | Yes, casters | Air Cushioned | Yes | Weight | 4.4 lb (2.0 kg) | | Box Dimensions (LxWxH) | 42.8 x 5.5 x 5.2" | - Impact Two Section Back Light Stand (3')
Load Capacity | 7 lb / 3.2 kg | Mounting Options | 1/4"-20 Male Thread 3/8"-16 Male Thread 5/8" Receiver 5/8" Stud | Number of Sections | 2 | Maximum Working Height | 3' / 0.9 m | Minimum Working Height | 5.5" / 14 cm | Collapsed Height | 20" / 51 cm | Footprint Diameter | 23.6" / 60 cm | Accepts Wheels | No | Air Cushioned | No | Detachable Base | Yes | Leveling Leg | No | Reverse Legs | No | Finish | Black | Material | Aluminum | Weight | 2.9 lb / 1.3 kg | Warranty Length | Limited 1-Year Warranty | | Box Dimensions (LxWxH) | 20.55 x 3.3 x 3.25" | - Photogenic Shallow Satin Reflector
| Box Dimensions (LxWxH) | 8.4 x 6.6 x 4.75" | - Impact Light Kit Bag #2 (34 x 13.5 x 12")
| Interior Dimensions | 34 x 13.5 x 12" / 86.4 x 34.3 x 30.5 cm | | Closure Type | Zipper | Carry and Transport Options | 2 x Connecting Handstrap | Material of Construction | Nylon | Exterior Dimensions (W x H x D) | 34.5 x 14 x 13" / 87.6 x 35.6 x 33 cm | Weight | 5.8 lb / 2.6 kg | | Box Dimensions (LxWxH) | 35.0 x 14.0 x 12.5" | - 2 x Impact White Translucent Umbrella (43")
Size | 43.0" / 109.2 cm | Interior | White (Translucent) | Shaft Diameter | 8 mm | Folded Size | L: 28.3" / L: 71.8 cm | | Box Dimensions (LxWxH) | 29.0 x 2.7 x 1.65" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 49 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
LOOKING FOR A INSTRUCTIONS TO SET UP HP OFFICE JET PRO 6978, CAN NOT FIND MANUAL TO DO THIS. LOST INSTRUCTIONS TO DO THIS ON A COMPUTER.... Honeywell Home Doorbell 916.8 MHz Product Ref: 3231665-002 Rev B... Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth...
|
Discussion |
Latest contributions to the discussion:
Query Name: Mike Kiernan Vivitar ViviCam XX14 Digital Camera Have a ViviCamxx14 but cannot find the USB cord. Std USB on 1 end fits USB but ViviCam end cannot be determined. Any help would be greatly appreciated. Current Walmart had generics but do not fit.
OhioSteady@Gmail.com... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ...
|
|