|
User Manual for Pittsburgh Modular Lifeforms Double Helix Oscillator Complex Matrix Oscillator Eurorack Module Click to enlarge the picture
Contents of the user manual for the Pittsburgh Modular Lifeforms Double Helix Oscillator
- Product category: Synthesizer Modules Pittsburgh Modular
- Brand: Pittsburgh Modular
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Pittsburgh Modular Synthesizer Modules
|
User manual for the Pittsburgh Modular Lifeforms Double Helix Oscillator contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Pittsburgh Modular product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Pittsburgh Modular user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Pittsburgh Modular product will considerably shorten its lifespan!
|
Product description The Lifeforms Double Helix Oscillator from Pittsburgh Modular is a complex matrix oscillator designed to be the nucleus of a Eurorack analog synthesizer. At the core of the Double Helix are two wide-range precision oscillators with the primary offering a full complement of waveforms and multiple modulation options, while the secondary oscillator features a more focused set of waves and frequency modulation. Both oscillators will run a sub-audio frequency and will work as LFOs for a voltage-controlled modulation source.
The contour section features a highly-tuned wavefolder paired with a dynamic impulse low-pass gate. The first half of the section is a voltage-controlled, 6-stage wavefolder that adds odd harmonics to the incoming waveform. The timbre controls set the density and amplitude of the folds. When processing a sine wave, the wavefolder creates a spectral change from zero harmonics to square, with an infinite harmonic series.
The second half of the contour section is a dynamic impulse low-pass gate that performs similarly to pairing a low-pass filter and VCA together and as the dynamics control is opened, the filter adds harmonics and the VCA increases the amplitude of the waveform. As the dynamics control is closed, the filter removes harmonics and the VCA decreases the amplitude of the waveform, which mimics how sound behaves in the real world, creating a more naturally tonal response.
The modulation section includes an LFO offering simultaneous square, sine, and random waveforms, as well as a noise source for audio or modulation use. Two voltage-controlled routers manage all the CV inputs and create a dual voltage-controlled modulation matrix, well suited for complex signal paths, experimentation, and live performances. The Lifeforms Double Helix is 28hp wide, 1.5" (37mm) deep, and requires 205mA of power. The module includes a ribbon cable. - Double Helix Oscillator Controls
-
- Primary Oscillator Controls
- Frequency Knob: Frequency control sweeps from LFO through the full audio range
- Fine Tune Knob: Limited-range frequency control
- Blade/Pulse CV Knob: Blade wave shape and pulse width control CV input attenuator
- FM CV Knob: Frequency modulation CV input attenuator
- V/O Input Jack: 1 volt per octave pitch tracking input
- Sine Wave Output Jack
- Saw Wave Output Jack
- Blade Wave Output Jack
- Sub Wave Output Jack
- Pulse Wave Output Jack
- Secondary Oscillator Controls
- Frequency Knob: Frequency control sweeps from LFO through the full audio range
- Fine Tune Knob: Limited range frequency control
- FM CV Knob: Frequency modulation CV input attenuator
- V/O Input Jack: 1 volt per octave pitch tracking input
- Sine Wave Output Jack
- Saw Wave Output Jack
- Square Wave Output Jack
- Contour Controls
- Timbre CV Knob: Timbre control CV input attenuator
- Timbre Knob: Wave folder gain control
- Dynamics Knob: Low pass gate dynamics control. Full left, no gain and no harmonics. Full right, full gain and full harmonics
- Dynamics CV Knob: Dynamics control CV input attenuator
- Dynamics Response Knob: Sets the decay time related to the impulse gate input and dynamics CV input
- In 1 Input Jack: Contour section audio signal input mixed with In 2. This jack is normaled to the primary oscillator sine wave
- In 2 Input Jack: Contour section audio signal input mixed with In 1
- Impulse Input Jack: Gate or trigger input used to strike the dynamic impulse circuit and quickly modulate the dynamics of the audio signal
- Output Jack: Contour section audio signal output jack
- Modulation Controls
- Frequency Knob: Frequency control sweeps through LFO range
- Square Output Jack: Square wave output jack
- Random Output Jack: Stepped random CV output jack
- Sine Output Jack: Sine wave output jack
- Noise Output Jack: Analog noise output jack
- Voltage Controlled Routers Controls
-
- In A Input Jack: Modulation source A. This signal is sent through the voltage controlled router to any CV input switched to the A position. This jack is normaled to the modulation section sine wave
- VCR A CV Input Jack: CV input used to modulate channel A modulation signal level passed through to the routing switches
- VCR A Level Knob: Sets the channel A modulation signal level passed through to the routing switches
- FM 1 CV Input Source Switch: Sets primary oscillator FM CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the FM 1 CV Input Jack
- FM 1 CV Input Jack: Primary Oscillator FM signal input jack. The input jack is mixed with the FM 1 CV Input Source Switch
- Blade/Pulse CV Input Source Switch: Sets Primary Oscillator blade wave shape and pulse width CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the Blade/Pulse CV Input Jack
- Blade/Pulse CV Input Jack: Primary Oscillator blade wave shape and pulse width signal input jack. The input jack is mixed with the Blade/Pulse CV Input Source Switch
- FM 2 CV Input Source Switch: Sets Secondary Oscillator FM CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the FM 2 CV Input Jack
- FM 2 CV Input Jack: Secondary Oscillator FM signal input jack. The input jack is mixed with the FM 2 CV Input Source Switch
- Timbre CV Input Source Switch: Sets the contour section timbre CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the Timbre CV Input Jack
- Timbre CV Input Jack: Contour section timbre CV input jack. The input jack is mixed with the Timbre CV Input Source Switch
- Dynamics CV Input Source Switch: Sets the contour section dynamics CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the Dynamics CV Input Jack
- Dynamics CV Input Jack: Contour section dynamics CV input jack. The input jack is mixed with the Dynamics CV Input Source Switch
- VCR Output Jack Source Switch: Sets the VCR output jack source. Select between A (up), B (down), A and B off (center)
- VCR Output Jack: Channel A or Channel B signal output jack. Output of modulation signal passed through to the routing switches
- VCR B Level Knob: Sets the channel B modulation signal level passed through to the routing switches
- In B Input Jack: Modulation source B. This signal is sent through the voltage controlled router to any CV input switched to the B position. This jack is normaled to the modulation section sine wave
- VCR B CV Input Jack: CV input used to modulate channel B modulation signal level passed through to the routing switches
In the Box Pittsburgh Modular Lifeforms Double Helix Oscillator Complex Matrix Oscillator Eurorack Module Ribbon Cable Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Pittsburgh Modular Lifeforms Double Helix Oscillator Complex Matrix Oscillator Eurorack Module in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersPittsburgh Modular PMS2036 Specs | Control Knobs | Primary Oscillator Controls
Frequency Knob: Frequency control sweeps from LFO through the full audio range
Fine Tune Knob: Limited-range frequency control
Blade|Pulse CV Knob: Blade wave shape and Pulse width control CV input attenuator
FM CV Knob: Frequency modulation CV input attenuator
Secondary Oscillator Controls
Frequency Knob: Frequency control sweeps from LFO through the full audio range
Fine Tune Knob: Limited range frequency control
FM CV Knob: Frequency modulation CV input attenuator
Contour Controls
Timbre CV Knob: Timbre control CV input attenuator
Timbre Knob: Wave folder gain control
Dynamics Knob: Low-pass gate dynamics control. Full left, no gain and no harmonics. Full right, full gain and full harmonics
Dynamics CV Knob: Dynamics control CV input attenuator
Dynamics Response Knob: Sets the decay time related to the impulse gate input and dynamics CV input
Modulation Controls
Frequency Knob: Frequency control sweeps through LFO range
Voltage Controlled Routers Controls
VCR A Level Knob: Sets the channel A modulation signal level passed through to the routing switches
VCR B Level Knob: Sets the channel B modulation signal level passed through to the routing switches
| | Control Switches | Voltage Controlled Routers
FM 1 CV Input Source Switch: Sets Primary Oscillator FM CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the FM 1 CV Input Jack
Blade|Pulse CV Input Source Switch: Sets Primary Oscillator blade wave shape and pulse width CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the Blade|Pulse CV Input Jack
FM 2 CV Input Source Switch: Sets Secondary Oscillator FM CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the FM 2 CV Input Jack.
Timbre CV Input Source Switch: Sets the contour section timbre CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the Timbre CV Input Jack.
Dynamics CV Input Source Switch: Sets the contour section dynamics CV input source. Select between A (up), B (down), A and B off (center). The selected signal is mixed with the signal from the Dynamics CV Input Jack.
VCR Output Jack Source Switch: Sets the VCR output jack source. Select between A (up), B (down), A and B off (center) | | Patch Points | Primary Oscillator Controls
V/O Input Jack: 1/8" / 3.5 mm
Sine Wave Output Jack: 1/8" / 3.5 mm
Saw Wave Output Jack: 1/8" / 3.5 mm
Blade Wave Output Jack: 1/8" / 3.5 mm
Sub Wave Output Jack: 1/8" / 3.5 mm
Pulse Wave Output Jack: 1/8" / 3.5 mm
Secondary Oscillator Controls
V/O Input Jack: 1/8" / 3.5 mm
Sine Wave Output Jack: 1/8" / 3.5 mm
Saw Wave Output Jack: 1/8" / 3.5 mm
Square Wave Output Jack: 1/8" / 3.5 mm
Contour Controls
In 1 Input Jack: 1/8" / 3.5 mm
In 2 Input Jack: 1/8" / 3.5 mm
Impulse Input Jack: G1/8" / 3.5 mm
Output Jack: 1/8" / 3.5 mm
Modulation Controls
Square Output Jack: 1/8" / 3.5 mm
Random Output Jack: 1/8" / 3.5 mm
Sine Output Jack: 1/8" / 3.5 mm
Noise Output Jack: 1/8" / 3.5 mm
Voltage Controlled Routers
In A Input Jack: 1/8" / 3.5 mm
VCR A CV Input Jack: 1/8" / 3.5 mm
Blade|Pulse CV Input Jack: 1/8" / 3.5 mm
FM 2 CV Input Jack: 1/8" / 3.5 mm
Timbre CV Input Jack: 1/8" / 3.5 mm
Dynamics CV Input Jack: 1/8" / 3.5 mm
VCR Output Jack: 1/8" / 3.5 mm
In B Input Jack: Modulation source B. 1/8" / 3.5 mm
VCR B CV Input Jack: 1/8" / 3.5 mm | | Power Usage | +12 V 223 mA, -12 V 205 mA Does not require +5 V Reversed power polarity protection | | Size | Horizontal Pitch (hp): 28 | | Depth | 1.5" / 37 mm | | | | Package Weight | 1.25 lb | | Box Dimensions (LxWxH) | 6.8 x 6.4 x 3.4" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 51 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Milano Carbon Fiber Tripod with B1 Head...
c.PLASMA X LARGE SIN/SION user manual-pdf
centrotherm PECVD platform c.PLASMA...
Streamlight Macrostream...
AOC curved gaming monitor...
User manual for Bowens ML500 Flash head ...
|
| Discussion |
Latest contributions to the discussion:
SQ 7 PDF
Name: Yash Deshmukh
Allen & Heath SQ-7 48-Channel 36-Bus
I want to download PDF ...
Business Card Studio 10
Name: Yvon
Summitsoft Business Card Studio Pro
Business Card Studio 10 will not print. Window 11
My printer will print anything else....
REQUESTING FOR QUOTE
Name: ALBERT GABRIEL
Auray X-Style Piano Bench & Double
RFQ 919
S/ N DESCRIPTION UNIT QTY
1 KEYBOARD
YAMAHA MODEL
PSR-S750 61-KEY
DIGITAL
WORKSTATION PCS 1
2 AURAY DOUBLE-X
KEYBOARD
STAND WITH
PULL LOCK MFR
#KSPL-2X PCS 1
3 YAMAHA YBA-611
ARTISTE SERIES
KEYBOARD BAG
FOR 61-KEY
PORTABLE
KEYBOARDS PCS 1
4 AURAY FP-P1...
Leatherman Micra
Name: Rebecca Burgess
Leatherman Micra Tool with Box
Please send me a user's manual for Leatherman Micra...
total cost of Casio CTK 3500 61 key manual
Name: Eric Sensiba
Casio CTK-3500 61-Key Keyboard with Touch
What is the total cost for a Casio CTK 3500 61 key Electronic keyboard manual including taxes and shipping t85739?...
|
|
