|
User Manual for Plugin Alliance EQ Freak - EQ and Filter Plug-Ins Bundle Click to enlarge the picture
Contents of the user manual for the Plugin Alliance EQ Freak - EQ
- Product category: Virtual Processor Plug-Ins Plugin Alliance
- Brand: Plugin Alliance
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Plugin Alliance Virtual Processor Plug-Ins
 |
User manual for the Plugin Alliance EQ Freak - EQ contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Plugin Alliance product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Plugin Alliance user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Plugin Alliance product will considerably shorten its lifespan!
|
Product description EQ Freak from Plugin Alliance is collection of EQ and filter plug-ins that can cover virtually every tone shaping need, from easy-to-operate sound sweeteners to complex, problem solving solutions. The complete range of EQs and filters include standard and dynamic models as well as mono, stereo and M/S tools. - bx_digital V2 - Mastering Processor Plug-In (Download) The bx_digital V2 from Brainworx is a state-of-the-art digital mastering processor that provides a mastering-class eleven-band equalizer, mid/side de-esser, mono-maker and intelligent bass- and presence-shifters, plus extra mid/side features such as pan and stereo width control. The software delivers all of the functions of the company's Modus EQ bx1 hardware, including the M/S-solo-buttons, and several additional functions such as Auto Listen, etc.
The plug-in comprises three modes. Conventional left and right stereo mode for stereo/dual mono applications, and a stereo mode with a built-in M/S-matrix, mainly used for stereo mastering purposes. A three-channel mode (stereo plus one mono channel) is provided for surround mastering and recording studios purposes. An M/S-recording mode uses two individual microphone signals to create a highly mono-compatible stereo signal, mainly used for orchestral recordings, choirs or for recording acoustic instruments in general. - Three modes including mid/side mastering, mid/side recording, and left/right stereo
- "SixPack" master section with six knobs
- Built-in M/S de-esser/dynamic EQ (20 Hz to 22 kHz)
- Precise correlation and balance metering
- Individual bypass and link for every feature
- Four presets, copy/paste, undo/redo for all functions
- Auto solo and auto listen modes for TDM and Native systems
- Individual pan for mid and side signals
- Phase-corrected solo buttons for left/right/mid/side signals
- Intelligent EQs: Bass-shift and presence-shift
- Mono-Maker makes bass frequencies in a stereo file mono only
- Extensive metering, individual left/right and mid/side LEDs
- Touch-sensitive Auto Solo supports ICON solo modes
- Seven-band EQ perfectly matches the center section ICON-EQ
- Mouse over feature allows for adjusting parameters by holding the mouse over the bass-drum or the pedal and turning the mouse wheel
- bx_dynEQ V2 - Dynamic Equalizer Plug-In (Download) The bx_ dynEQ V2 from Brainworx is a dynamic EQ plug-in using innovative M/S features and an Inverse Mode that allows for results not possible with standard EQs. A dynamic EQ is a filter that is not limited to a specific gain level, but which changes gain settings according to the dynamics of a trigger signal. This trigger signal can be the whole signal running through the plug-in or just a filtered part of that signal, using the internal filtered sidechain.
The plug-in comprises three parts: bx_dynEQ mono, bx_dynEQ stereo (L/R) and bx_dynEQ stereo (M/S). The M/S mode features a "cross-feed" setting which allows the mid and side signals to "trigger" each other. A comprehensive selection of filter types is included. Preset knobs in the GUI enable the engineer to easily find starting points for any desired processing. In addition to being an EQ, the software can also function as a dynamics processor. - Single- and two-band dynamic EQ plug-in
- Mono, multi-mono and stereo modes
- Complete set of filter types for both main audio path and sidechain, including low- and high-shelving, peak bands, band-pass filters, high-pass, low-pass, bass-shift, presence-shift
- M/S stereo width control on any stereo channel
- M/S cross-feed feature for sophisticated results
- EQ panel with multi-mode EQ display (actual EQ-curves and sidechain filter curves)
- Mouse over feature allows for adjusting parameters by holding the mouse over the bass-drum or the pedal and turning the mouse wheel
- Direct Access - type a value directly into the text field
- bx_hybrid V2 - Mono and Stereo EQ Plug-Ins Bundle (Download) bx_hybrid V2 from Brainworx is an eleven-band EQ plug-in, but with a multitude of selectable filter types, including shelving, high- and low-pass and notch filters, and peak bands. The software is particularly suited to mixing and mastering and when used in conjunction with an Avid ICON console, all controls can be mapped to the center section EQ of the controller. Additional filters include sweepable bass and presence shifter EQs with control of shifters available via joysticks, including the ICON surround panners.
For further control of the stereo image, various Mid/Side modes are available depending on the type of configuration used. Individual bypass switches are available for almost every feature, as is in the stereo version extensive individual metering for left/right and M/S levels. A switchable EQ panel provides multi-mode EQ displays, such as actual EQ curves, bypassed curves, left and right channels and Auto Listen modes. The plug-in is fully automatable. - Artifact-free EQ-ing up to 26 kHz
- Shelving filters, high- and low-pass, notch filters, peak bands, eleven bands in total
- "Mouse Over" feature allows for adjusting a parameter by holding the mouse over any knob and simply turning the mouse wheel
- Direct access value input - just type in any valid number into the text
- EQ graphic panel switch-able
- 64-bit and AAX (DSP and Native) support
- museq - EQ Plug-In for Native Systems (Download) The museq from elysia is a native based plug-in that closely emulates the company's hardware EQ, including the high- and low- cut filters with resonance and the Warm Mode sound shaper. The plug-in adds some extras, like the integrated M/S matrix for mid and side processing, the ability to link both channels for more convenient stereo operation, and dedicated output level controllers for adapting user settings to the available headroom.
The license includes two plug-ins. The full master version includes all the functions, while a slightly reduced mix version is perfect for quick and easy setup. All the major plug-in formats are supported for both 32- and 64-bit operating systems. - Software emulation of the company's hardware EQ
- Integrated M/S Matrix provides an alternative to standard stereo operation where the user can process the mid and side signals, while also maintaining mono compatibility
- Resonance high- and low-pass filters
- Warm Mode emulates the effects of an analog slew rate limiter that reduces the speed of the output amplifier stages - this affects the frequency spectrum, the harmonics and the transient response at the same time
- Switchable filter width can be switched from a wide to a narrow Q factor independent from the setting of the gain controller
- Parallel filter design makes it possible to leave the high and middle frequencies completely untouched when using the high- and low-pass filters
- Mousewheel support for setting parameters
- EQ4 - 6 Band Equalizer with AIR BAND Plug-In (Download) The EQ4 from Maag Audio is an emulation of the company's 500 series EQ module and provides six bands of EQ. Like the hardware, the plug-in delivers transparency and a top end presence while maintaining the natural sound behind the mix. EQ adjustments cause minimal phase shift.
The AIR BAND interacts with the other bands as well as the other bands with each other. The summing of the band-passes and the AIR BAND is the essential part of the design, needed to ensure that the integrity of the sound is maintained. - Six-band EQ plug-in based on the Maag Audio EQ4 500 series hardware equalizer
- AIR BAND with boost-only shelf at 2.5, 5, 10, 20, or 40 kHz
- Overall output level trim control
- EQ Ranger Vol. 1 - Graphic EQ Plug-In (Download) The SPL EQ Ranger Vol. 1 from SPL consists of three graphic EQ plug-in emulations, based upon the company's respective SPL RackPack series analog hardware modules. The package includes Bass Ranger, Vox Ranger and Full Ranger. While Bass Ranger and Vox Ranger process specific frequency ranges, the Full Ranger module complements them with a set of filter bands that covers the whole frequency range.
Unlike static graphic EQs that use the same center frequencies in repeating octaves, the Ranger EQ modules are designed to work with specific instruments and their different frequency ranges. This allows for more effective instrument separation in a mix. A "Settings" feature can store four sets of adjustments that can be recalled with a single click and additionally automated within host software for applying different parameters to different parts of a song. - EQ plug-ins based on the EQ modules from the SPL RackPack series
- Modules combine the sound of passive filters with efficient operation
- Bass Ranger and Vox Ranger feature instrument and vocal specific ranges
- Includes a full frequency range module
- Support of mouse wheel control for adjusting rotary controls - place cursor over a control and move the scroll wheel to adjust the setting
- Passeq - Passive 3-Band Filter Plug-In (Download) The Passeq from SPL is an emulation of the company's analog hardware unit, and unlike other passive EQs, delivers three-bands for both boost and cut stages. A similarity shared with these types of EQs is the use of fixed (switchable) frequency points within each band. The Passeq provides twelve switchable frequencies per band, and since boost and cut frequencies are not identical, the result is a total of seventy-two frequencies per channel, more than enough for the most elaborate EQ curves.
The software programming faithfully reproduces the unique sound of the original hardware, with the complex interactions between each single filter reproduced in detail. Intrinsic to passive filter designs is that the signal always runs through the whole network. Whenever the settings change, interactions take place between the filters which adds to the characteristic sound of these types of EQs.
Additionally, internal code supports mouse wheel control for the rotary controls. Place the mouse cursor over a control and move the scroll wheel to adjust the setting. - Reproduction of all the interactions between the three passive filters
- Seventy-two filters on three bands per channel
- Emulation of input and output transformers
- Two graphical user interfaces - dual channel and space saving single channel view
- Switchable M/S mode for independent processing of mid and side information
- Mono, stereo or multi-channel operation
In the Box Bundle Items bx_digital V2 - Mastering Processor Plug-In (Download) rzvqxatteucbyx bx_dynEQ V2 - Dynamic Equalizer Plug-In (Download) bx_hybrid V2 - Mono and Stereo EQ Plug-Ins Bundle (Download) rzvqxatteucbyx museq - EQ Plug-In for Native Systems (Download) EQ4 - 6 Band Equalizer with AIR BAND Plug-In (Download) EQ Ranger Vol. 1 - Graphic EQ Plug-In (Download) Passeq - Passive 3-Band Filter Plug-In (Download) rzvqxatteucbyx Table of Contents
|
Upload User Manual
Have you got an user manual for the Plugin Alliance EQ Freak - EQ and Filter Plug-Ins Bundle in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - bx_digital V2 - Mastering Processor Plug-In (Download)
| System Requirements | Mac OS X
Intel CPU only (2 GHz or higher recommended)
OS X 10.6 Snow Leopard or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
Audio Units, AAX Native, RTAS, TDM/Venue, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher)
PC
Intel-compatible CPU with SSE2 instruction set (Pentium 4 compatible or higher with at least 2 GHz processor recommended)
Windows XP or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
AAX Native, RTAS, TDM/Venue, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher) | - bx_dynEQ V2 - Dynamic Equalizer Plug-In (Download)
| System Requirements | Mac OS X
Intel CPU only (2 GHz or higher recommended)
OS X 10.6 Snow Leopard or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
Audio Units, AAX Native, RTAS, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher)
PC
Intel-compatible CPU with SSE2 instruction set (Pentium 4 compatible or higher with at least 2 GHz processor recommended)
Windows XP or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
AAX Native, RTAS, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher) | - bx_hybrid V2 - Mono and Stereo EQ Plug-Ins Bundle (Download)
| System Requirements | Mac OS X
Intel CPU only (2 GHz or higher recommended)
OS X 10.6 Snow Leopard or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
Audio Units, AAX Native, RTAS, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher)
PC
Intel-compatible CPU with SSE2 instruction set (Pentium 4 compatible or higher with at least 2 GHz processor recommended)
Windows XP or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
AAX Native, RTAS, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher) | - museq - EQ Plug-In for Native Systems (Download)
| System Requirements | Mac OS X
Intel CPU only (2 GHz or higher recommended)
OS X 10.6 Snow Leopard or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
Pro Tools 9.0 or higher, Audio Units, VST2.4, VST3 compatible host
PC
Intel-compatible CPU with SSE2 instruction set (Pentium 4 compatible or higher with at least 2 GHz processor recommended)
Windows XP or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
Pro Tools 9.0 or higher, VST2.4, VST3 compatible host | - EQ4 - 6 Band Equalizer with AIR BAND Plug-In (Download)
| System Requirements | Mac OS X
Intel CPU only (2 GHz or higher recommended)
OS X 10.6 Snow Leopard or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
Audio Units, AAX Native, RTAS, TDM/Venue, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher)
PC
Intel-compatible CPU with SSE2 instruction set (Pentium 4 compatible or higher with at least 2 GHz processor recommended)
Windows XP or higher (Windows 7 or higher recommended)
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
AAX Native, RTAS, TDM/Venue, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher) | - EQ Ranger Vol. 1 - Graphic EQ Plug-In (Download)
| System Requirements | Mac OS X
Intel CPU only (2 GHz or higher recommended)
OS X 10.6 Snow Leopard or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
Audio Units, AAX Native, RTAS, TDM/Venue, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher)
PC
Intel-compatible CPU with SSE2 instruction set (Pentium 4 compatible or higher with at least 2 GHz processor recommended)
Windows XP or higher (Windows 7 or higher recommended)
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
AAX Native, RTAS, TDM/Venue, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher) | - Passeq - Passive 3-Band Filter Plug-In (Download)
| System Requirements | Mac OS X
Intel CPU only (2 GHz or higher recommended)
OS X 10.6 Snow Leopard or higher
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
Audio Units, AAX Native, RTAS, TDM/Venue, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher)
PC
Intel-compatible CPU with SSE2 instruction set (Pentium 4 compatible or higher with at least 2 GHz processor recommended)
Windows XP or higher (Windows 7 or higher recommended)
2 GB RAM
Display resolution of 1440 x 900, 1280 x 960 or higher
AAX Native, RTAS, TDM/Venue, VST2.4, VST3 compatible host (Pro Tools 9.0 or higher) |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 77 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Go Pro FETCH Dog Harness ADOGM-001...
Trijacon ACOG USMC scope...
Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth...
LG Gram 17 Laptop...
LG 300W 2.1 ch surround sound manual. It has the soundbar, subwoofer, wireless receiver for connected rear speakers and wireless controller. ...
|
| Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
...
lithium ion battery pack EN-EL5 3.7 V 1100mAh
Name: Jane Holland
Nikon EN-EL5 Lithium-Ion Battery
HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland...
Settings access and setup
Name: Edwin Derks
Nuance PaperPort 14
I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha...
query
Name: Vudayagiri Balasubramanyam
Bose Wave SoundTouch Music System IV
how to set up my bose radio with my remote working-class ...
Hi. I didn’t even get a chance to try it once! :( plz help
Name: Eric Tasakovic
Keeley Dark Side Pedal
I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|
