|
User Manual for PortaCom 4-Person Wired Headset Kit with Power Station and Beltpacks Click to enlarge the picture
Contents of the user manual for the PortaCom 4-Person Wired Headset Kit with
- Product category: Wired Intercoms PortaCom
- Brand: PortaCom
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for PortaCom Wired Intercoms
|
User manual for the PortaCom 4-Person Wired Headset Kit with contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any PortaCom product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official PortaCom user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a PortaCom product will considerably shorten its lifespan!
|
Product description Bundled together by for your convenience, the PortaCom 4-Person Wired Headset Kit supplies beltpacks, single-sided headsets, and all the cabling you'd need to make connections. Its four PortaCom BP-2000 Beltpacks enable 2-way communication over intercoms, and its four included headsets plug right into the Beltpacks. The included PC-100 Powering Base Console powers the whole thing. - PortaCom PC-100 - 2 Channel Powering Base Console The Porta-Com PC-100 is a 2-channel powering console for the COM series of wired communication systems. Featuring a powering capacity of up to 20 beltpacks, the console's 22 VDC output supports cable runs of up to 2500'(ft).
- Rackmountable 2-channel power supply with 4 outputs
- Powering capacity of up to 20 beltpacks
UPC: 689466056730 - 4 x PortaCom BP-2000 Beltpack The PortaCom BP-2000 Beltpack connects the PortaCom headsets to the intercom system, and establishes 2-way communication. The BP-2000 features an A/B channel switch, Mic and Call switches with LED indicators. UPC: 689466055436
- 4 x Senal SMH-1010CH Communication Headset (Single-Sided) Designed for wired and wireless communications alike, the Senal SMH-1010CH is a single-sided communications headset for use in TV or radio broadcast settings, as well as sports applications and behind-the-scenes theater environments. First, you'll notice its deep, padded ear cushion, which offers not only comfort, but isolation and noise-reduction in noisy scenarios. Behind the ear cushion, a 40mm neodymium driver gives you a wide frequency response of 20 Hz to 20 kHz, as well as an expansive dynamic range.
The microphone supplied with the SMH-1010CH is a cardioid dynamic capsule, designed to minimize pickup of off-axis sound while capturing your voice clearly and intelligibly. It sits upon a durable gooseneck that can be rotated 180°. This configuration can be used on the left or right side of the SMH-1010CH. Additionally, a switch is built into the gooseneck that automatically mutes the signal when it's swiveled into the vertical position; thus, to mute your microphone, all you have to do is flip the gooseneck into the upright position. The SMH-1010CH interfaces with a variety of cables that offer compatibility with many major wired and wireless systems, such as Telex and PortaCom. You can also use this communication headset with broadcast consoles, mixers, and computers. Simply plug your separately-available, corresponding cable into the SMH-1010CH's twist-locking jack, and you're good to go. The headphones are also collapsible, making storage and transportation a cinch. Note: Please note, the SMH-1010CH does not ship with an output cable; for a list of compatible cables, please see our various kit configurations, or contact one of our specialists online, over the phone, or at our illustrious SuperStore. - Intelligible Speech Reproduction
- A cardioid dynamic microphone has been deployed for clear and intelligible voice reproduction
- 40mm Neodymium Driver
- The single-sided headphone utilizes a 40mm neodymium driver, which offers a wide frequency response and expansive dynamic range for accurate monitoring
- Passive Noise Reduction
- The SMH-1010CH offers a closed-back, over-the-ear design, which provides isolation in noisy environments; this allows you to hear what's coming over the headphones, such as cues from the director, instructions from the team leader, or coaching from the sidelines
- Precise Microphone Positioning
- The microphone is mounted on a durable gooseneck that swivels 180°; it can be used on the left or right side
- Detachable Twist-Locking Cable Design
- The twist-locking jack allows for easy attachment of cables and accessories
- Compatibility with Multiple Terminations
- The SMH-1010CH can be used with various cables, allowing you to work with multiple wired and wireless communications systems
- Comfortable Fit
- A soft, deep, and replaceable ear cushion—as well as a padded headband—provide comfort throughout long listening sessions
- Durable Design
- This headset is designed to stand up to studio and field use, offering a reliable performance even in the most demanding environments
- Folding Design
- The SMH-1010CH's folding design allows you to store and transport your headphones as needed
UPC: 847628586772 - 4 x Senal SMH-H4X Cable for Senal SMH-Series Communication Headsets The Senal SMH-H4X is a replacement cable intended for use with SMH-series communication headsets. It can also be used to augment your headset's versatility, giving you the ability to plug into a Clear-Com or PortaCom system if you already have cabling for a different broadcast console or mixer on hand.
At one end, you'll find the 3.5mm TRRS connector and corresponding locking jack. This twists into your SMH-1010CH or SMH-1020CH communication headset, establishing a secure and reliable connection all the while.
At the other end, you'll note a female, 4-pin XLR connector, allowing you to connect the headset to PortaCom and Clear-Com systems. In fact, the SMH-H4X is part of a whole ecosystem of SMH-series cables, all of which let you swap between the pin-outs of different communication and broadcast systems with ease. - Compatible with Senal SMH-Series Headsets
- The SMH-H4X fits perfectly into the twist-lock of your SMH-1010CH or SMH-1020CH, ensuring a secure connection to your headset.
- Compatible with PortaCom & Clear-Com Systems
- This cable terminates in a 4-pin XLR female plug. This allows you to connect your SMH-series headset to a PortaCom or Clear-Com system. In this way, you can take advantage of the full-duplex communication between ProLink beltpacks and an unbalanced party-line system.
UPC: 847628003378 - 4 x Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 20' (6.1 m), Black The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (20') is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders; or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well-suited for critical recording and broadcast situations.
Studio Elite 4000 Series cables are made from 24 AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. A 98% braided outer shield makes the cable resistant to EMI and RFI noise. The Neutrix XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection. - 98% braided shield offers protection from EMI and RFI noise.
- Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable's signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable's core.
- 24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.
- Cotton yarn reduces electrostatic and microphonic noise.
- All solder points shrink-wrapped for protection.
- Neutrik XX silver connectors offer high conductivity.
- Cast zinc shell and chuck style strain relief.
UPC: 847628551190 In the Box - PC-100 - 2 Channel Powering Base Console for Wired Intercoms rvscybqx
- 1 x AC-20 Power Adapter
- 1 Year Warranty
- 4 x Senal - SMH-1010CH Communication Headset (Single-Sided)
- 4 x Senal - SMH-H4X Cable for Senal SMH-Series Communication Headsets
- 4 x Kopul - Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 20' (6.1 m), Black
Table of Contents
|
Upload User Manual
Have you got an user manual for the PortaCom 4-Person Wired Headset Kit with Power Station and Beltpacks in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - PortaCom PC-100 - 2 Channel Powering Base Console
Output Connectors | 4 x 3-pin XLR Male | Voltage Output | 22 Volts (to Beltpacks) | Maximum Current Capacity | 400 mA | Maximum # of Belt Packs | 20 (BP-200) | Input Power Requirement | 24 VAC, 50/60 Hz, 750 mA 30-40 VDC, 500 mA | Power Adapter | AC-20: Input Voltage: 120 VAC, 50/60 Hz Output Voltage/Current: 24 VAC, 750 mA | Dimensions | 1.75 x 8.5 x 4.5"(in.) (45 x 216 x 114mm) | Weight | 3.6 lb (1.7 kg) | | Box Dimensions (LxWxH) | 9.9 x 6.25 x 2.3" | - 4 x PortaCom BP-2000 Beltpack
Connections | Line Input - 3-pin XLR Female Headset Connector - 4-pin XLR Male | Power | 20 mA Max | Dimensions | 3.8 x 2.75 x 1.25" (96.5 x 69.85 x 31.75 mm) | Weight | 0.40 oz (0.0113 kg) | | Box Dimensions (LxWxH) | 5.0 x 3.2 x 2.0" | - 4 x Senal SMH-1010CH Communication Headset (Single-Sided)
| Element | Moving coil, dynamic | Polar Pattern (Microphone) | Cardioid | Frequency Range | 50 Hz to 18 kHz | Sensitivity | -79 dB ±3 dB (0 dB = 1 V/microbar, 1 kHz indicated by open circuit) | Impedance | 200 Ohms ±30% at 1 kHz | | Ear Cup | Single-Sided | Speaker Dimensions | 1.6" / 40.0 mm | Magnet Type | 20 Hz to 20 kHz | Sensitivity | 87 dB | Impedance | 400 Ohms | Distortion | <5% | Weight | 7.4 oz / 209.8 g | | Box Dimensions (LxWxH) | 11.6 x 7.5 x 4.5" | - 4 x Senal SMH-H4X Cable for Senal SMH-Series Communication Headsets
Connectors | TRRS to XLR female (4-pin) | Compatible with | PortaCom and Clear-Com systems | Length | 48.3" / 122.6 cm | Weight | 2.4 oz / 68 g | | Box Dimensions (LxWxH) | 6.5 x 5.0 x 1.1" | - 4 x Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 20' (6.1 m), Black
Connector 1 | 3-Pin XLR Male | Connector 2 | 3-Pin XLR Female | Cable Length | 20' / 6.1 m | Shielding | 98% Braid | Wire Gauge | 24 AWG | Contact Plating | Silver | | Box Dimensions (LxWxH) | 10.7 x 8.0 x 1.5" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 82 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
looking for a user manual for Quickbooks Premier Nonprofit 2020 for a Disabled American Veterans office.... Bower SFD9260.... 4-IN-1 WIRELESS CHARGER
... Brand :Gemini,model # XGA 4000,AND IT WAS PURCHASED NEW IN 2022,OR POSSIBLY EARLY 2023.WORKED perfect till one day I hit power switch and blew fuse x2... ZZSTAR binoculars...
|
Discussion |
Latest contributions to the discussion:
v18 Name: Craig Mcinturff Davis & Sanford Provista 7518B Tripod I am looking for a camera mounting plate for a v18 fluid head Davis & Sandford ... Impact SF-ABRL160 Flash stopped working Name: Sarah sananes Impact SF-ABRL160 Stand Mount Flash with Hello, our flash is connected to a canon camera and all of the sudden the flash is no longer working.
Does the flash have a certain battery life? ... REPEAT REQUEST AS YOU DID NOT ANSWER YOU JUST SENT ME MY MESSAGE BACK -PLEASE HELP Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi again-- all this did was send this email back to me with a link that brought me right back here... what is this?? also a link to search for manuals-- ive been there done that there is NO Manual to be found that answers my ? Please HELP thanks!!
Hi there is an extra small sc... Tripod heads DO NOT sit flush on the plate of the tripod Help Please Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi there is an extra small screw on the plate that the tripod head screws on that prevents my gimbal tripod head from sitting flush when it is screwed on. this is very annoying and does not allow my camera to stay steady when shooting. Please tell me how to resolve this issue. th... battery replacement Name: Danette L Boyd-Perez Doxie Go SE Portable Scanner Hello-- I have been working w/ support- it seems they sent incorrect battery replacement.
I confirmed DX-255 and was sent battery NP 120. There is no way that battery fits inside the panel of the DX-255. Please advise next steps thank you....
|
|