|
User Manual for PSI AUDIO A215-M Powered Full-Range Mastering Monitor Click to enlarge the picture
Contents of the user manual for the PSI AUDIO A215-M Powered Full-Range Mastering
- Product category: Studio Monitors PSI AUDIO
- Brand: PSI AUDIO
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for PSI AUDIO Studio Monitors
|
User manual for the PSI AUDIO A215-M Powered Full-Range Mastering contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any PSI AUDIO product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official PSI AUDIO user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a PSI AUDIO product will considerably shorten its lifespan!
|
Product description The single, red PSI Audio A215-M is a powered, full-range monitor designed to be tonally balanced with high-resolution detail and efficient transient response for accuracy in mixing, mastering, and surround applications. The innovative floor-standing design offers outstanding performance in the full range without the need for an additional subwoofer. The bi-amplifier delivers 120W to the two 5.8" woofers and 40W to the 3.9" tweeter, which combine to provide a frequency response of 36 Hz to 23 kHz at an SPL of 117 dB per pair. The amplifier output also features the AOI output stages, while the active crossover with integrated CPR delivers an impulse behavior with accurate stereo imaging. The crossover is also optimized for maximum phase coherence, projecting a wide horizontal and vertical listening area. The rear panel offers a balanced XLR input and features a volume control and a roll-off control for optimizing the low frequencies specific to the room. The PSI Audio A215-M includes a power cord and an individual frequency-response diagram. -
- Broad bandwidth in a compact cabinet
- Flat frequency response
- Optimized directivity by phase coherency
- Real symmetrical directivity
- Class-G low-temperature amplifier stage
- Protection circuits with overload indicator
- Real balanced input
- Designed for stereo and multi-channel monitoring
- Magnetically shielded for use near video monitors
- Adaptive Output Impedance (AOI)
- The AOI system is made up of a system that detects the movement of the membrane and the coil, as well as a filtered counter reaction. This is then tuned to achieve the ideal dampening rate for each frequency
- Acoustic Load Guide (ALG)
- The ALG is used in all regular 2-way and 3-way PSI Audio speakers. The shape and dimensions of the waveguide used in PSI Audio's custom tweeter is specially designed to optimize directivity, as well as maximize sound-pressure level, and extend bandwidth
- Compensated Phase Response (CPR)
- The CPR system is made up of several all-pass filters, each acting in a specific range. Combined, they create a compensated phase response, which provides a constant group delay that is kept to the bare minimum through the entirely analog technology
- Phantom Standby Control (PSC)
- The PSC technology enables to remote activation and deactivation of the standby mode of your loudspeakers via the signal cable
UPC: 720260151679 In the Box PSI AUDIO A215-M Powered Full-Range Mastering Monitor (Single, Red) Power Cord Individual Frequency-Response Diagram and Data Sheet Limited 5-Year Warranty Limited 2-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the PSI AUDIO A215-M Powered Full-Range Mastering Monitor in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersPSI AUDIO A215-M Specs | Monitor Type | Active 2-Way | Enclosure | Bass-Reflex, Shielded | Power Rating | 160 W Peak | Drivers | HF Driver: 1 x 3.9" / 100 mm Tweeter LF Driver: 1 x 5.8" / 147 mm Woofer | Amplification | HF Amplifier: Rated at 40 W LF Amplifier: Rated at 120 W | | Frequency Range | 36 Hz to 23 kHz (at -6 dB) | Frequency Response | 42 Hz to 20 kHz ± 2 dB | Maximum Sound Pressure Level (SPL) | 117 dB | Signal-to-Noise Ratio | 96 dBA | Total Harmonic Distortion (THD) | 1.5% | Maximum Input Level | +20.7 dBu | Dispersion | 90 x 60° (Horizontal x Vertical) | | Crossover Frequency | 1.8 kHz | | I/O | 1 x 3-Pin XLR Balanced Female Analog Input (10 kOhms) | | AC Input Power | 115 to 230 VAC at 50/60 Hz | Power Consumption | 1.2 W (Standby) 5 W (Idle) 150 W (Maximum) | | Operating Temperature | 41 to 104°F / 5 to 40°C | Operating Humidity | 90% 75% (Recommended) | | Enclosure Material | MDF | Dimensions (W x H x D) | 6.5 x 43.7 x 9.8" / 166.0 x 1110.0 x 250.0 mm | Weight | 34.8 lb / 15.8 kg |
Rating80% users recommend this product to others. And what about you?

This product has already been rated by 02 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
pocket quadcopter RIV-YT320... CYBERPOWERPC GMA6200BSTV2... FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
... Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
... Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f...
|
|