|
User Manual for PSI AUDIO Sub A125-M Compact 10" Powered Subwoofer Click to enlarge the picture
Contents of the user manual for the PSI AUDIO Sub A125-M Compact 10"
- Product category: Studio Monitors PSI AUDIO
- Brand: PSI AUDIO
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for PSI AUDIO Studio Monitors
|
User manual for the PSI AUDIO Sub A125-M Compact 10" contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any PSI AUDIO product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official PSI AUDIO user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a PSI AUDIO product will considerably shorten its lifespan!
|
Product description The red PSI Audio Sub A125-M is a compact, powered subwoofer designed to seamlessly extend the bandwidth of all PSI Audio's studio monitors. The 225W Class-G amplifier powers the 10" woofer to provide a frequency response of 28 to 90 Hz at an SPL of 111 dB (half space).
The double-box MDF enclosure offers a built-in, anti-resonance system, while the amplifier unit is acoustically uncoupled to provide uncolored performance without artifacts. The rear panel offers two XLR inputs and outputs for working with satellite speakers and is well suited for stereo and multi-channel (surround) monitoring. The level / input sensitivity control helps audio input signal calibration, while the "Roll-Off" control aligns the low frequency response to room conditions. The PSI Audio Sub A125-M includes a power cord, anti-slippage stickers, and an individual-frequency response diagram. -
- Built-in, anti-resonance system in a double-box cabinet
- Class-G low temperature amplifier stage
- Amplifier unit acoustically uncoupled from speaker cabinet
- True balanced input with outputs for satellite systems
- Protection circuits with overload indicator
- Designed for stereo and multichannel monitoring
- Phase and amplitude response compatible with all PSI Audio monitors
- Adaptive Output Impedance (AOI) Technology: The AOI is made up of a system that detects the movement of the membrane and the coil, as well as a filtered counter reaction. This is then tuned to achieve the ideal dampening rate for each frequency
- Compensated Phase Response (CPR) Technology: The CPR system is made up of several all-pass filters, each acting in a specific range. Combined, they create a compensated phase response, which provides a constant group delay that is kept to the bare minimum through the entirely analog technology
- Phantom Standby Control (PSC) Technology: The PSC technology enables remote activation and deactivation of the standby mode of your loudspeakers via the signal cable
UPC: 720260151631 In the Box PSI AUDIO Sub A125-M Compact 10" Powered Subwoofer (Red) Power Cord Individual Frequency-Response Diagram and Data Sheet Set of Anti-Slippage Stickers Limited 5-Year Warranty Limited 2-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the PSI AUDIO Sub A125-M Compact 10" Powered Subwoofer in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersPSI AUDIO Sub A125-M Specs | | | Monitor Type | Active Subwoofer | | Enclosure | Bass-Reflex, Shielded | | Power Rating | 225 W Peak
150 W | | Drivers | LF Driver: 1 x 10.2" / 258 mm Woofer | | | | Frequency Range | 28 Hz to 90 Hz (at -6 dB) | | Frequency Response | 31 Hz to 65 Hz ± 2 dB | | Maximum Sound Pressure Level (SPL) | 111 dB | | Signal-to-Noise Ratio | 116 dBA | | Total Harmonic Distortion (THD) | 1.5% | | | | Crossover Frequency | 90 Hz | | | | I/O | 2 x 3-Pin XLR Female Analog Input (10 kOhms)
2 x 3-Pin XLR Male Analog Output | | | | AC Input Power | 115 to 230 VAC at 50/60 Hz | | Power Consumption | 1.7 W (Standby)
4 W (Idle)
200 W (Maximum) | | | | Operating Temperature | 41 to 104°F / 5 to 40°C | | Operating Humidity | 90%
75% (Recommended) | | | | Enclosure Material | MDF | | Dimensions (W x H x D) | 12.6 x 18.9 x 15.2" / 320.0 x 480.0 x 385.0 mm | | Weight | 45.2 lb / 20.5 kg |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 04 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Xc2 Surerire...
pocket quadcopter RIV-YT320...
CYBERPOWERPC GMA6200BSTV2...
FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
...
Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
...
|
|
