User manual
QSC E110 Speaker and Amp Kit

User Manual for QSC E110 Speaker and Amp Kit with Two E110 Speakers and GXD4 DSP Amplifier

• Product category: PA Speakers QSC
• Brand: QSC
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for QSC PA Speakers

Product description

• 2 x QSC E110 10" Two-Way Passive Loudspeaker (Black) The black QSC E110 is a compact, two-way loudspeaker with a 10” die cast frame woofer with a 2.5” voice-coil, housed in a multi-purpose enclosure for stage monitor or main PA deployment. It incorporates QSC DMT (Directivity Matched Transition) design with an 85° wide coverage. When used as a stage monitor, the E110 loudspeaker is angled up at 55°, allowing it to be placed near the performer when used on a crowded stage.
  
  An all metal, dual angle, 35mm socket allows the loudspeaker to be mounted vertically on a pole or angled down by 10° to improve audience coverage and reduce rear wall reflections. Multiple mounting options using E-Series Yoke or M8 eyebolts (sold separately) are supported. Input connections include dual NL4 as well as screw terminal receptacles.
  
  Like all speakers in the E-Series Entertainment System, the E110 is compatible with GXD, PLD amplifiers and TouchMix digital mixers, which afford advanced signal processing options to help fine-tune the performance of your speakers. The QSC E110 features a redesigned yoke for better mounting in permanent installations.
  • • 300W continuous, 1200W peak
    • E-Series Entertainment System offers advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers
    • Rugged tour-grade textured paint
    • Foam-lined perforated steel grille
    • Constructed of rugged plywood and coated in black, textured paint
    • Dual angle pole socket
  UPC: 684284071811
• QSC GXD 4 Professional 1600W Power Amplifier with DSP The GXD 4 from QSC is a power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 1600W. The GXD 4 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 11.3 lbs. The integrated DSP section includes High and Low-Pass filters (24dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting.The parallel XLR and 1/4" TRS input connectors offer broad compatibility with convenient loop-through capabilities, while the professional binding posts and NL4 connector provide mono and bi-amped speaker connections. In addition to the limiting offered on inputs and outputs, the GXD employs smart speaker protection by providing settings for the loudspeaker's continuous output and impedance (4 ohm or 8 ohm). The GXD 4 ships with a standard IEC power cord.
  • • High peak output power with up to 1600 W
    • Power levels matched to the most popular loudspeakers and optimized for maximum real-world headroom into 4-ohm and 8-ohm speaker systems
    • Class-D output stage with a universal power supply for high performance and efficiency
    • Extensive built-in loudspeaker processing, includes high & low-pass filters, 4-band PEQ, limiting, and delay
    • Large LCD display simplifies amplifier setup and indicates amp status
    • Inputs: Parallel XLR and 1/4” TRS connectors for compatibility with any source while providing convenient loop-thru capability
    • Precision rotary encoders for gain and DSP parameter control
    • Outputs: Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connections
    • Digital Limiting automatically protects the amplifier from damage due to temperature rise or overdrive
    • Adjustable speaker protection to match your loudspeaker’s power and impedance
    • Front panel LEDs indicate signal presence, input overload, and amplifier clipping
  UPC: 684284064899

• 2 x E110 10" Two-Way Passive Loudspeaker (Black)
• Limited 3-Year Warranty

• GXD 4 Professional 1600W Power Amplifier with DSP

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• 2 x QSC E110 10" Two-Way Passive Loudspeaker (Black)

  Configuration	Passive 2-Way
  Total Power Capacity	300 W RMS 1200 W Peak
  System Impedance	8 Ohms (Nominal)

  HF Driver	1 x Compression Driver with 1" / 25 mm Throat
  HF Voice Coil	1.8" / 45 mm
  LF Driver	1 x 10" / 25.4 cm Woofer
  LF Voice Coil	2.5" / 64 mm

  Frequency Range	68 Hz to 20 kHz
  Maximum SPL	126 dB
  Coverage Angle	85° H x 85° V
  Speaker Sensitivity	95 dB

  Audio I/O	2 x speakON NL4 1 x Barrier Strip

  Crossover	1.8 kHz Full-Range Only

  Mounting	4 x M8 1 x 1.38" / 35 mm Pole Socket (Dual Angle)
  Handles	1 x Top
  Construction Material	Perforated Metal Grille, Plywood
  Dimensions	13.0 x 22.0 x 13.0" / 330.0 x 558.8 x 330.2 mm
  Weight	44 lb / 20 kg

  Box Dimensions (LxWxH)	26.2 x 17.0 x 16.8"

• QSC GXD 4 Professional 1600W Power Amplifier with DSP

  Watts Per Channel	8 Ohm Dynamic (Both Channels Driven): 600 W 4 Ohm Dynamic (Both Channels Driven): 800 W 8 Ohm Continuous (Both Channels Driven): 400 W 4 Ohm Continuous (Both Channels Driven): 600 W
  Total Harmonic Distortion (THD)	Distortion: < 1% (typical), 1 kHz at full rated power
  Signal to Noise Ratio	Signal to Noise: 100 dB, (A-weighted, 20 Hz to 20 kHz)
  Input Sensitivity	1.2 Vrms 3.9 Vrms
  Voltage Gain	33.5 dB
  Output Circuit	Class D
  Power Requirements	Power Requirements: 1/8 power at 4 ohms 100 VAC: 3.4 A 120 VAC: 2.9 A 230 VAC: 1.6 A
  Frequency Response	20 Hz to 20 kHz (+0.7 dB, -0.8 dB)
  Headroom	Dynamic Headroom: 1.25 dB (4 ohms)
  Damping Factor	100
  Input Impedance	20 kOhms (balanced) 10 kOhms (unbalanced)
  Maximum Input Level	+23.5 dBu
  Input Connectors	3-pin XLR/F 1/4" TRS, balanced
  Output Connectors	NL4 (Channel 1 - 1+/-, Channel 2 - 2+/-), binding posts
  Amplifier Protection	Short circuit Open circuit Thermal RF protection Load protected against DC faults
  Front Panel Controls and Indicators	2 x rotary encoders 3 x operational buttons (HOME, ENTER, EXIT) 2 x green signal LEDs, indicate signal presence 2 x red A/D clip LEDs, indicate input over-drive and/or amplifier current clipping Blue power LED ring, AC on 256 x 128 Pixel LCD: 2.1 x 1.0" / 5.4 x 2.5 cm
  Digital Signal Processing (DSP)	High Pass Filter: 4th order LR, adjustable frequency 20 Hz to 4 kHz Low Pass Filter: 4th order LR, adjustable frequency 60 Hz to 4 kHz 4-Band PEQ: Variable frequency, gain, and bandwidth Peak Limiter: Power, aggressiveness, and impedance selection Delay: 50 ms maximum
  Approvals	UL, CE, RoHS/WEEE compliant
  Dimensions (H x W x D)	3.5 x 19.0 x 10.2" / 8.9 x 48.3 x 25.9 cm
  Weight	11.3 lb / 5.1 kg

  Box Dimensions (LxWxH)	23.5 x 14.3 x 6.4"

Rating

Discussion