|
User Manual for Really Right Stuff Add-On Pano Package with Lever-Release Clamp Click to enlarge the picture
Contents of the user manual for the Really Right Stuff Add-On Pano Package
- Product category: Panoramic & Time Lapse Heads Really Right Stuff
- Brand: Really Right Stuff
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Really Right Stuff Panoramic & Time Lapse Heads
|
User manual for the Really Right Stuff Add-On Pano Package contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Really Right Stuff product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Really Right Stuff user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Really Right Stuff product will considerably shorten its lifespan!
|
Product description Time-Lapse Tips and Tools Read More This Really Right Stuff Add-On Pano Package consists of three modular components, a CB-10 Camera Bar, a PG-02 Vertical Arm, and a B2-LR-II Lever-Release Clamp. Along with a separately-available leveling base, rotary base, and Arca-type rail that can accommodate a camera with a lens, the Add-On Pano Package helps provide the ability to capture a sequence of images for creating single- or multi-row panoramas that are free of stitching artifacts.
Three countersunk screws firmly attach the lever-release clamp along the top of the vertical arm, which features a bottom-facing Arca-type clamp. When the Really Right Stuff Add-On Pano Package is assembled for use, the vertical arm's bottom-facing Arca-type clamp is fastened to the top surface of the camera bar. The lever-release clamp faces sideways, so that it can hold an Arca-type rail with a camera and lens above and perpendicular to the camera bar.
An Arca-type rail with a camera and lens can be attached to, removed from, or moved within the lever-release clamp by using the lever-release clamp's push-and-pull cam lock lever. Similarly, the locking knob for the vertical arm's bottom-facing Arca-type clamp can be loosened, allowing the vertical arm to slide along the length of the camera bar, which itself can be adjusted backwards or forwards within an Arca-type rotary base or tripod head before it is also locked into place. Together, these three movements enable precise positioning of a camera lens's entrance pupil above the rotary axis of the device being used to incrementally turn the camera during the process of capturing a panorama's overlapping component images. By aligning the entrance pupil of the lens and the rotary axis within a panoramic photo system, the relative positions of foreground and background objects that appear among sequential images for a panorama remain consistent. Those sequential images can then be joined by seamlessly overlapping those repeating foreground and background objects, allowing lines and elements that extend throughout the finished panorama to appear unbroken and true to life.
When installing or moving an Arca-type rail for a camera and lens within the lever-release clamp, the rail can be precisely positioned using the 60mm center-finder rulers that are engraved on two sides of the clamp to maintain visibility. Similarly, an engraved 24cm center-finder ruler on the top surface of the camera bar allows the position of the vertical arm to be recorded, as well as the position of the camera bar relative to the Arca-type rotary base or tripod head it is placed on. Specific camera and lens configurations with an entrance pupil correctly located above a rotary axis can then be quickly and reliably repeated.
At the side of the vertical arm opposite the lever-release clamp is a locking knob that can be loosened, allowing the lever-release clamp to be rotated 360° along increments that are engraved for every 2.5°. An Arca-type rail with a camera and lens within the lever-release clamp can then be tilted backwards and forwards, enabling multi-row or spherical panoramas that dramatically increase the amount of potential area or detail which can be captured.
Each component included with the Really Right Stuff Add-On Pano Package is constructed using 6061-T6 aluminum alloy for durability, while remaining lightweight. Both the camera bar and vertical arm have built-in bubble levels and are tapped with female accessory threads for direct attachment of accessories that feature corresponding mounts. At the top surface of the vertical arm are four 1/4"-20 female accessory threads and one 3/8"-16 female accessory thread. The camera bar's top surface provides one 3/8"-16 female accessory thread and five 1/4"-20 female accessory threads, in addition to an end-facing 1/4"-20 female accessory thread that points away from the camera bar's right side when the numbers on its center-finder ruler are correctly oriented to the user. -
- With a separately-available leveling base, rotary base, and Arca-type rail that can accommodate a camera with lens; included CB-10 Camera Bar, PG-02 Vertical Arm, and B2-LR-II Lever-Release Clamp can be assembled for the capture of a sequence of images to create single- or multi-row panoramas that are free of stitching artifacts
- Enables precise positioning of a camera lens's entrance pupil above the rotary axis of the device being used, to incrementally turn a camera in the process of capturing a panorama's overlapping component images
- Helps ensure that relative positions of foreground and background objects that appear among sequential images for a panorama remain consistent, allowing lines and elements that extend throughout a finished panorama to appear unbroken and true to life
- 60mm center-finder rulers are engraved on two sides of the lever-release clamp to maintain their visibility for precise positioning of compatible Arca-type rails for a camera and lens
- Engraved 24cm center-finder ruler on the top surface of the camera bar allows the position of the vertical arm and camera bar to be recorded; specific camera and lens configurations with an entrance pupil correctly located above a rotary axis can then be quickly and reliably repeated
- Lever-release clamp can be rotated 360° along increments engraved on the vertical arm at every 2.5° for multi-row or spherical panoramas
- Built-in bubble levels for lever-release clamp and camera bar
- Camera bar, vertical arm, and lever-release clamp are constructed from 6061-T6 aluminum for durability, while remaining lightweight
- Stainless steel push-and-pull cam lock lever for lever-release clamp
- Supports up to 50.0 lb
- 5/32 hex key and M5 hex key to tighten or loosen countersunk screws for lever-release clamp
UPC: 818413028456 In the Box Really Right Stuff Add-On Pano Package with Lever-Release Clamp 10" Camera Bar ffetcvdbwdttcyaxrsbsr PG-02 Vertical Arm B2-LR-II Lever-Release Clamp (60mm) 5/32 Hex Key M5 Hex Key 5/32 Countersunk Screw 2 x M5 Countersunk Screws Limited 5-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Really Right Stuff Add-On Pano Package with Lever-Release Clamp in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersReally Right Stuff 8871 Specs | Material of Construction | CB-10 Camera Bar: 6061-T6 aluminum alloy
PG-02 Vertical Arm: 6061-T6 aluminum alloy
B2-LR-II Lever-Release Clamp: 6061-T6 aluminum alloy and stainless steel | | Load Capacity | 50.0 lb / 22.7 kg | | Dimensions (L x H) | 10.0 x 9.0" / 25.4 x 22.9 cm | | Weight | 2.4 lb / 1.1 kg | | | | Package Weight | 3.55 lb | | Box Dimensions (LxWxH) | 11.3 x 6.3 x 5.0" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 46 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
| Discussion |
Latest contributions to the discussion:
TR-P5TP pink robot dog
Name: Allyson
Top Race Race & Remote Control
Hello we are having issues with the remote to the robot dog it just flashes a red light will not sync to the robot dog what so ever the dog is charged and batteries have been changed out more the once, Can i get help trouble shooting the issue or if something needs to be sent bac...
Query
Name: Libba Guyton
Canon Pixma TS9520 Wireless All-In-One Printer
Support Code 1851
Multi purpose tray guide is open. Close the guide and press OK.
Done and the same message continue to appear....
Manual
Name: Grant
Konus KonuStart-700B 60mm f 11.6 Refractor
Please send user manual for Konustart-700B to above email address....
Fs3x manual
Name: Randy Reid
DigiTech FS3X Three-Function Foot Switch
I need manual
...
adding additional chime
Name: Stan Stansfield
OhmKat Video Doorbell Power Supply for
The additional chime does not work and is closure to the transmitter then the first one. I plugged in the additional chime and set the volume and chime. The original chime works when the additional chime is plugged in to new location. The original chime is located further away bu...
|
|
