User Manual for RECONYX SC950C HyperFire Cellular General Surveillance Camera Click to enlarge the picture
Contents of the user manual for the RECONYX SC950C HyperFire Cellular General Surveillance
- Product category: Trail/Wildlife Cameras RECONYX
- Brand: RECONYX
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for RECONYX Trail/Wildlife Cameras
 |
User manual for the RECONYX SC950C HyperFire Cellular General Surveillance contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any RECONYX product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official RECONYX user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a RECONYX product will considerably shorten its lifespan!
|
Product description With the RECONYX SC950 HyperFire Cellular General Surveillance Camera for AT&T, you can capture photos and video of trespassers or game while you're away and then send the images directly to as many as 4 mobile phones and/or 2 email accounts. A cellular text messaging and data plan through AT&T is required and not included. The camera takes 3.1MP photos when triggered by motion detection or a programmable time-lapse setting. Its PIR motion sensor features a 100' range and a very fast 0.2-sec trigger speed to ensure you don't miss the action, while time-lapse mode provides a range of selectable, regular intervals allowing you to see patterns and change over time.
Designed to be discreet, the HyperFire has an invisible No Glow infrared flash that provides illumination without spooking or alerting your subjects. The camera records images to optional SD/SDHC memory cards up to 32GB. It runs on 12 optional AA lithium batteries or AA NiMH rechargeable batteries. Additionally, the HyperFire can operate via the included power cable, which plugs into the external power jack.
The included MapView Professional Software with Google Maps technology lets you organize your images geographically and access them with ease. Security scheduling software, also included, allows you to set up the camera ahead of time so that it will be on or off during various times of the day and days of the week. As an added bonus, the HyperFire is supplied with an adjustable bungee cord for mounting to a tree or post. - Cellular Capability
-
- 3G cellular modem in camera transmits large thumbnail images (384 x 512) in near real time directly to as many as 4 mobile phones and/or 2 email accounts
- SIM card installed by Reconyx
- Cellular plan through AT&T required and not included
- SMS/MMS text message plan required to enable texting of images
- Data plan required to enable images to be sent to email
- To set up your AT&T GoPhone Account, see Setup Guidetsebwbwrazrvbzzurwsrrsfbvs
- Must be a pay-as-you-go account for the camera
- Easiest way to set up account is through AT&T website
- Auto-Renew option automatically renews plan every month
- While camera is sending photos, it cannot capture photos
- RECONYX Mobile for Desktop
-
- Downloadable Windows application that helps to organize and store pictures sent from your camera
- Requires PC running Microsoft Windows XP, Vista, or 7
- Automatically monitors your email account for any incoming messages from your cellular camera
- Instantly notifies you as new images arrive
- New images instantly displayed in a pop-up window on PC
- Provides access to additional data taken with image, such as battery voltage, temperature, etc.
- Each camera's images automatically download and save to individual folders on your PC, in default location where supplied MapView software keeps its images; this way, you can easily tie camera's images to a location on map within MapView
- Photo Capture
-
- 3.1MP or 2MP
- Color images by day, black-and-white by night
- Night mode offers balanced, high quality, fast shutter, and max range settings to suit your preferences
- Balanced: Best combination of image quality, shutter speed, and flash range
- High Quality: Better-looking images with reduced flash range
- Fast Shutter: Reduced motion blur with reduced flash range
- Max Range: Increased flash range with reduced image quality
- Motion Sensor
-
- Passive infrared / PIR motion sensor
- Very fast 0.2-sec trigger speed
- Detection range: 100'
- Two horizontal detection bands and 6 different zones that cover detection area
- Can be scheduled on or off at 15-minute intervals within a 24-hr time period
- 2 schedules available to be assigned to different days of week, so you can assign separate weekday and weekend schedules
- Sensor sensitivity settings: Low, low/medium, medium, medium/high, and high
- Interval Recording
-
- Selectable Intervals: 1 sec, 2 sec, 3 sec, 5 sec, 15 sec, 30 sec, 1 minute, 5 minutes, 15 minutes, 30 minutes, and 60 minutes
- 5 sec is shortest possible interval when motion trigger or flash/illuminator is on
- Motion + Time-Lapse Mode
-
- Enables camera to be triggered by both motion sensor and time-lapse function
- If an animal or trespasser moves into detection zone in between time-lapse intervals, motion sensor will pick up movement so camera won't miss the shot
- Continuous Shooting
-
- By default, camera is set up to capture 3 pictures per trigger with a 1 sec pause between pictures and no delay between triggers
- Selectable Post-Trigger Delay Times: 0, 15 sec, 30 sec, 1.0 minute, 3.0 minutes, and 5.0 minutes
- RapidFire NearVideo: Up to 2 fps (still image capture)
- 1, 2, 3, 5, or 10 images per trigger in RapidFire mode, with 1, 3, 5, or 10 sec between triggers
- Flash
-
- No-glow, covert infrared flash offers illumination while remaining invisible to game and humans so as not to spook or alert them
- Effective range: 50'
- Setup, Display, and Options
-
- Small, back-lit LCD text screen for menu navigation and settings selection
- Date, time, temperature, and moon phase stamping on images
- By recording phase of moon at time of capture, camera allows you to see which animals are inactive during full or nearly-full moon — when brighter lighting conditions make them more visible to predators
- Moon phase also helps determine if brighter or darker backgrounds in images are due to fullness of moon
- Computer, tablet, television, digital picture frame, or other device required in order to review images
- Low-battery status indicator light
- Settings you select are retained until changed again, even when camera is turned off
- CodeLoc pass-code protection to thwart theft attempts
- Memory
-
- Records images to optional SD/SDHC cards up to 32GB
- Loop Recording: If selected, this mode prompts camera to overwrite older pictures with new ones when memory card reaches capacity
- Power
-
- Runs on 12 optional AA lithium batteries or AA NiMH rechargeable batteries
- Battery types must not be mixed
- Lithium cells should provide 30,000-40,000 images, depending on usage and settings, while NiMH should provide 20,000-30,000
- Can also run on included external power supply, which plugs into 12V external power jack on bottom of camera
- Optional Solar Panel Power Unit available for use with external jack
- Connectivity
-
- Compatible with optional RTI-350 Wireless Trigger & Illuminator (additional charges apply)
- MapView Professional Software
-
- Included mapping and image management software with Google Maps technology, allowing you to organize your images geographically and access them with ease
- "Power tagging" feature makes it easy to define metadata and tag your images with data specific to your application
- Compatible with Windows XP, Vista, or 7
- Security Scheduling Software
-
- Included program that allows you to schedule the camera on or off during different times of day and days of week
- Makes it easy to set up differing weekday and weekend schedules
- Mounting and Security
-
- Includes adjustable bungee cord
- Dual integrated loops for optional padlocks
- Latch for secure housing closure
- Compatible with optional RECONYX VersaMount or ThunderBolt
- Can be connected to optional tree mount using threaded hole on back
- Compatible with optional Master Python Lock
- Can be placed inside RECONYX's steel HyperFire Security Enclosure or Heavy-Duty Security Enclosure
- Durability
-
- Weather-resistant housing with gasket built to withstand elements during prolonged outdoor use
- Breathable vent underneath latch enables air pressure inside camera housing to equalize while keeping water out
- Optional moisture-absorbing desiccant available for added protection
UPC: 858414001263 In the Box RECONYX SC950C HyperFire Cellular General Surveillance Camera (AT&T) MapView Professional and Security Scheduling Software (CD-ROM) Adjustable Bungee Cord for Mounting 12V External Power Supply SIM Card Installed by Reconyx Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the RECONYX SC950C HyperFire Cellular General Surveillance Camera in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersRECONYX SC950C Specs | Camera Type | Surveillance/security/trail/wildlife | | | | Resolution | 3.1 MP
2.0 MP (1920 x 1080) | | Sensor | Motion Sensor: Passive infrared / PIR
Trigger Speed: 0.2 sec
Detection range: 100' / 30.5 m | | File Formats | Not specified by manufacturer | | | | Lens | Angle of view not specified by manufacturer | | Focus Range | Not specified by manufacturer | | | | Sensitivity | Motion Sensor: Low, low/medium, medium, medium/high, and high | | Exposure Modes | Day and night modes
Day mode in color, night mode in black-and-white
Night Mode: Balanced, high quality, fast shutter, and max range settings | | Burst Capability | Default Setting: 3 pictures per trigger with 1 sec pause between pictures and no delay between triggers
Selectable Post-Trigger Delay Times: 0, 15 sec, 30 sec, 1.0 minute, 3.0 minutes, and 5.0 minutes
RapidFire NearVideo Mode:
Up to 2.0 fps
1, 2, 3, 5, or 10 images per trigger
1, 3, 5, or 10 sec between triggers | | Interval Recording | Yes, time-lapse shooting
Selectable Intervals: 1.0 sec, 2.0 sec, 3.0 sec, 5.0 sec, 15 sec, 30 sec, 1.0 minute, 5.0 minutes, 15 minutes, 30 minutes, and 60 minutes
5.0 sec is shortest possible interval when motion trigger or flash/illuminator is on
AM period and PM period | | Remote Control | Optional RTI350 Wireless Remote Trigger & Illuminator | | | | Built-in Flash | No-glow infrared flash | | Effective Flash Range | 50' / 15.25 m | | | | Memory Card Type | SD/SDHC up to 32 GB (not included) | | | | Display | Small, back-lit LCD text screen for menu navigation and settings selection | | Playback | No — computer, tablet, TV, digital picture frame, or other device required for image review | | | | Connectivity | Cellular connectivity enabled — see Overview section for details
Compatible with optional RTI-350 Wireless Trigger & Illuminator (additional charges apply) | | System & Software Requirements | MapView Professional and Security Scheduling Software:
PC running Windows XP, Vista, or 7
CD-ROM drive
Downloadable RECONYX Mobile for Desktop:
PC running Windows XP, Vista, or 7 | | | | Operating Temperature | -20 to 120°F / -29 to 49°C | | Durability | Weather-resistant housing with gasket | | | | Battery Type | 12 x AA lithium batteries or AA NiMH rechargeable batteries (not included) | | Power Adapter | Included external power supply, which plugs into 12 V external power jack on bottom of camera | | | | Mounting | 2 x integrated loops for optional padlocks
Adjustable bungee cord included | | Dimensions | 5.5 x 4.5 x 3.0" / 14 x 11.4 x 7.6 cm | | | | Package Weight | 2.1 lb | | Box Dimensions (LxWxH) | 11.8 x 7.7 x 3.5" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 96 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
