User manual
RED DIGITAL CINEMA DSMC2 DRAGON-X Starter

User Manual for RED DIGITAL CINEMA DSMC2 DRAGON-X Starter Kit

• Product category: Digital Cine Cameras RED DIGITAL CINEMA
• Brand: RED DIGITAL CINEMA
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for RED DIGITAL CINEMA Digital Cine Cameras

Product description

• RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 5K S35 Sensor (2018 Unified DSMC2 Lineup) Bundling high performance raw video recording in a compact camera body, the RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 5K S35 Sensor is part of RED's 2018 unified DSMC2 lineup. Nearly limitless lens options are available for the DSMC2 system. While this camera requires a separately available lens mount, DSMC lens mounts themselves are offered in different varieties for compatibility with a wide array of lens systems.
  
  REDCODE RAW is the format of choice for DSMC2 cameras. RED's versatile raw codec uses wavelet compression to reduce data rates while maintaining a visually lossless image rendering. This efficient codec can be edited on many available NLE software programs without transcoding, though if you prefer you can record to ProRes or DNx as well. Lowering the recording resolution allows the sensor to capture higher frame rates for dramatic slow-motion footage. The DSMC2 cameras use sensor windowing to record slow motion in lower resolutions, requiring wider or smaller-format lenses to compensate for the additional crop. Recording rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher.
  DRAGON-X 5K S35 Sensor
  • The DRAGON-X 5K Super 35mm sensor is a 13.8MP CMOS sensor that features a dynamic range of 16.5+ stops and a resolution of 5120 x 2700.
  REDCODE RAW
  • The cornerstone of RED's workflow is the robust REDCODE RAW file format. Using wavelet compression with ratios ranging from 2:1 to 22:1, REDCODE RAW offers the versatility of raw files without the overwhelming storage requirements of uncompressed image data. Since REDCODE RAW has been around since the days of the RED ONE cinema camera, many common NLE software programs including Adobe Premiere Pro, Blackmagic Design DaVinci Resolve, Apple Final Cut Pro, and Avid Media Composer can import and edit REDCODE RAW footage without transcoding, saving production time in the edit suite. Capture rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher options.Note: Not all compression ratios are available at all resolutions and frame rates
  Apple ProRes and Avid DNx Formats
  • For projects requiring proxy files or quicker turnaround times than raw files permit, Apple ProRes or Avid DNx formats can be recorded at 4K and 2K resolutions directly to the onboard MINI-MAG media. Since these debayered video files can be recorded alongside the raw files, no extra time is required for transcoding the proxies. Bring the debayered files straight into your NLE and begin editing.
  DSMC2 Form Factor
  • Like the preceding DSMC cameras, RED designed the DSMC2 camera line to be modular to fit a wide range of production workflows. Smaller and lighter than the original DSMC design, when stripped down to the BRAIN itself, you have a high-resolution gimbal workhorse. Likewise, add DSMC2 modules to the rear to gain professional I/O connections and battery power. Many other parts of the DSMC2 design are meant to be interchangeable. Swap out the lens mounts to open up new libraries of lenses. Exchange the included standard OLPF (Optical Low-Pass Filter) for alternative image renderings at the sensor level. Mount an EVF without cables that can get snagged, or use a separately available adapter to attach RED LCDs via LEMO cable. Since the DSMC2 form factor is standardized, any accessories that you have for this DSMC2 body will work with any other DSMC2 body, should you upgrade or acquire an additional body in the future.
  Color Management
  • Supports 33x33x33, 32x32x32, 26x26x26, and 17x17x17 3D LUTs
    Variable number of 3D LUT outputs with DSMC2 expander module
    User-programmable shaper 1D LUTs
    Tetrahedral interpolation, 16-bit processing
  UPC: 856672007348
• RED DIGITAL CINEMA Touch 4.7" LCD for Select DSMC2 RED Cameras Designed for cable-free mounting to select DSMC2 RED cameras, the RED DIGITAL CINEMA Touch 4.7" LCD features 1280 x 720 resolution. The design of the LCD provides good off-axis viewing up to 160°, with 80° left, right, up, or down so you don't have to be directly aligned with the viewfinder to see an optimal image. The LCD features multi-touch control, with hard navigation buttons on the side.
  
  With a brightness level of 400 cd/m² and contrast ration of 1000:1 providing a clear image, the RED Touch LCD mounts directly to your camera without any cables needed between the LCD and your camera. It can mount directly onto DSMC2 cameras including the WEAPON 8K S35, WEAPON 6K, EPIC/SCARLET-W, EPIC/SCARLET M-X, EPIC/SCARLET DRAGON, and the RED RAVEN. A built-in mirror and image flip allow for monitoring while upside down for special applications.
  • The LCD is designed to mount directly to select cameras for cable-free operation.
  • Used in conjunction with the optional DSMC2 LEMO Adapter Collection, you can mount your DSMC2 display away from the camera body.
  • The built-in hinge provides up to 240° of tilt—90° forward and 150° back—which allows the LCD to fold flat on your camera.
  • You can use an optional DSMC2 LEMO Adapter B to mount the LCD to RED EPIC or RED SCARLET cameras.
  UPC: 856672007393
• RED DIGITAL CINEMA DSMC2 V-Mount Battery Module The DSMC2 V-Mount Battery Module from RED DIGITAL CINEMA is a low-profile, cable-free module that enables you to power your DSMC2 BRAIN and camera accessories using RED BRICK, REDVOLT-V, and other standard V-lock batteries. The V-lock mount and protected release button ensure ongoing power even during mobile shoots.
  
  This DSMC2 battery module offers a D-Tap connector on top and an auxiliary port on the side for powering peripherals and accessories. Together, the D-Tap and auxiliary connectors support a maximum combined current of 3.8A. The module also offers a DC input port that can be used to power the camera system when the module is attached to the BRAIN. When DC input power is supplied to the module and the camera is turned off, this module can also trickle-charge the attached V-lock battery.
  
  Manufactured from robust aluminum alloy, this DSMC2 battery module offers a blend of utility and power support in a lightweight and space-saving form factor. It is an ideal power solution for use with most DSMC2 expanders. Alternatively, connect the module directly to your DSMC2 BRAIN for a low-profile, battery-only power configuration.
• 2 x IDX System Technology DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port The IDX DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port features a V-mount and is only 2.3" thick, but packs 96Wh of capacity to power your professional devices. It is well suited for handheld gimbal and aerial applications, as well as run-and-gun productions where size and weight can become an issue. Battery data information displays in most camera's viewfinders.
  
  The DUO-C98 can handle a combined load of up to 10A among its V-mount, D-Tap outputs, and USB port. One of the D-Taps can also be used to charge the battery, although that requires an optional charger that is not included. Designed with battery circuit protection against overcharge, over-discharge, over-current, and exposure to high temperatures, providing protection to your battery from the rigors of production. A 5-LED battery life indicator on the side of the battery provides a quick visual indication of charge state of your battery.
  Key Features
  • • Suitable for handheld gimbal, aerial, run-and-gun, and other productions that need a high-power-draw battery in a small package
    • The battery data displays in the viewfinder system of most cameras, and the addition of an SMBUS enables RED cameras to display this information as well
    • Handles up to 10A loads
    • Two unregulated D-tap accessory outputs at 50W each
    • USB port
    • Battery circuit protection
    • 5-LED battery life indicator
    • Fully compatible with all IDX Endura V-mount chargers
  UPC: 825781012994
• IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply The IDX VL-2X 2-Channel V-Mount Charger & Power Supply supports lithium-ion and NiCad batteries and features three modes of operation. Charger mode provides sequential charging, automatically switching to the second battery after fully charging the first. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. Power Supply mode offers up to 36W of DC power via a 4-pin XLR output. Power Base mode allows you to power the XLR output off of attached batteries, without having to connect the charger to a power outlet. The three modes can only be used independently.
  
  This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition.
  Charge Times for Select IDX Batteries
  • DUO-C190:
    7 hours for one / 14 hours for two
    
    DUO-150:
    5 hours for one / 10 hours for two
    
    CUE-D150:
    5 hours for one / 10 hours for two
    
    ELITE:
    4.5 hours for one / 9.4 hours for two
    
    E-HL10DS:
    3.4 hours for one / 7.2 hours for two
    
    DUO-C95:
    3.4 hours for one / 7.2 hours for two
    
    DUO-95:
    3.3 hours for one / 7 hours for two
    
    CUE-D95:
    3.3 hours for one / 7 hours for two
    
    E-HL9:
    3.2 hours for one / 6.4 hours for two
    
    CUE-D75:
    3 hours for one / 6 hours for two
    
    NP-L7S:
    3 hours for one / 6 hours for two
  UPC: 825781012918
• RED DIGITAL CINEMA DSMC Canon Mount (Aluminum) This aluminum RED Digital Cinema DSMC Canon Mount attaches to your DSMC or DSMC2 camera brain providing an EF/EF-S compatible lens port for your camera. Dual locking rings secure your lens in the mount, minimizing play. The mount features captive screws, so you don't have to worry about accidentally dropping a screw into the sensor cavity. The mount supports electronic communication between the lens and the camera, although not all functions may be supported. RED DSMC mounts are designed to be swapped without requiring a backfocus adjustment.
  • This lens mount is made from aluminum for a balance between weight and strength
  • Autofocus support available for select EF lenses
  • Electronic iris control available for select EF and EF-S compatible lenses
  • Touch focus enabled for select lenses
  UPC: 856672007362
• RED DIGITAL CINEMA RED MINI-MAG (120GB) This RED DIGITAL CINEMA RED MINI-MAG has a capacity of 120GB, is compatible with most RED cameras (may require SSD module), and on select cameras can attain write speeds as high as 225 MB/s. The RED MINI-MAG can support simultaneous R3D and Apple ProRes recording, when used with DSMC2 camera systems.
  • RED MINI-MAGs are encased in aluminum and offer a compact form factor
  • Compatible with DSMC2 camera systems, the RED MINI-MAGs require a RED MINI-MAG Side SSD Module for use with your RED EPIC or SCARLET BRAIN. The RED MINI-MAG system requires that your DSMC is on firmware v5.1.34 or later.
  Maximum Data Rates
  • WEAPON DRAGON (Carbon Fiber): up to 225 MB/s
    WEAPON DRAGON (Magnesium): up to 225 MB/s
    EPIC DRAGON: up to 170 MB/s
    SCARLET DRAGON: up to 72 MB/s
    SCARLET-W and RAVEN DRAGON: up to 140 MB/s
• RED DIGITAL CINEMA RED STATION RED MINI-MAG (USB 3.1) Designed with the sole purpose of offloading data from your RED MINI-MAG SSD media, the RED STATION RED MINI-MAG supports USB 3.1 protocols and allows you to transfer files to your computer at up to 10 Gbps. Sleek, compact, and durable, the unit takes up little desktop room and its small size provides more possibilities for fitting it into cases. It includes one each of a USB Type-C, and a USB Type-C to Type-A cable. UPC: 856672007041
• RED DIGITAL CINEMA DSMC2 Universal Handle Secure the DSMC2 Universal Handle from RED DIGITAL CINEMA to your DSMC2 camera for a low-profile convenient handling option. The simple design has deep finger cutouts for comfort, and is lightweight so it won't weigh down your rig. Fourteen 1/4"-20 threaded holes configured along the top can be used to mount accessories. If you have an original DSMC camera (EPIC or SCARLET), the DSMC2 Universal Handle can be secured to the DSMC Tactical Top Plate accessory.
• RED DIGITAL CINEMA RED SIDEWINDER Multi-Tool The RED SIDEWINDER Multi-Tool from RED DIGITAL CINEMA is a great workbench companion for your DSMC and DSMC2 gear. The 11 different drivers can be opened to adjust the screws found throughout the modular DSMC and DSMC2 camera systems. Threaded holes on the sides of the multi-tool can hold non-captive screws safely, so they don't get lost while you make adjustments to your camera or add/remove camera modules. To ensure a long life, the nickel-plated, high-carbon steel alloy driver keys are secured to a heat-resistant polymer composite that should survive many a production. UPC: 856672007065
• RED DIGITAL CINEMA RED WORK MAT (18 x 24") The RED Digital Cinema RED WORK MAT is a portable flexible non-slip surface for building your camera or for use on a DIT cart. It provides a clean surface to work on and at 18 x 24", it is large enough for you to place your camera's components on during set up or break down. When you are done, the mat is flexible enough that you can just roll it up for storage.

• DSMC2 BRAIN with DRAGON-X 5K S35 Sensor (2018 Unified DSMC2 Lineup) cysustqywwdfcyuqyxvfscsb
• DSMC2 Standard Optical Low-Pass Filter
• Case for DSMC2 Camera BRAIN
• DSMC Front Body Cap
• DSMC AC Power Adapter
• 3" Professional Logo Sticker
• Torx L-Key T20 Wrench
• Hex Wrench (3/16")
• Mini World Travel Adapter Kit
• OLPF Case
• Limited 2-Year Warranty

• Touch 4.7" LCD for Select DSMC2 RED Cameras

• DSMC2 V-Mount Battery Module

• 2 x IDX System Technology - DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port

• IDX System Technology - VL-2X 2-Channel V-Mount Charger & Power Supply

• DSMC Canon Mount (Aluminum)

• RED MINI-MAG (120GB) cysustqywwdfcyuqyxvfscsb

• RED STATION RED MINI-MAG (USB 3.1)

• DSMC2 Universal Handle

• RED SIDEWINDER Multi-Tool

• RED WORK MAT (18 x 24")

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 5K S35 Sensor (2018 Unified DSMC2 Lineup)

  Image Sensor Size	25.6 x 13.5 mm (Super35)
  Sensor Type	CMOS
  Sensor Resolution	5120 x 2700 (15.36 MP)
  Color Filter	Bayer
  Shutter Type	Rolling Shutter
  Advertised Dynamic Range	16.5 Stops

  Lens Mount	None
  Lens Communication	Yes
  Built-In ND Filter	None
  Built-In Microphone Type	Stereo
  Recording Media	1 x RED MINI-MAG Card Slot

  Raw Recording	REDCODE RAW: 5120 x 2700 at 96 fps 4096 x 2160 at 120 fps 3072 x 1620 at 150 fps 2048 x 1080 at 240 fps
  Recording Modes	ProRes 4444XQ: 2048 x 1080 up to 120 fps ProRes 4444: 2048 x 1080 up to 120 fps ProRes 422HQ: 4096 x 2160 up to 29.97 fps 2048 x 1080 up to 120 fps ProRes 422: 4096 x 2160 up to 29.97 fps 2048 x 1080 up to 120 fps ProRes 422LT: 4098 x 2160 up to 29.97 fps 2048 x 1080 up to 120 fps
  Audio Recording	4-Channel 24-Bit 48 kHz

  Video Connectors	None
  Audio Connectors	None

  Power Connectors	None

  Operating Temperature	32 to 104°F / 0 to 40°C
  Storage Temperature	-4 to 122°F / -20 to 50°C
  Operating Humidity	0 to 85%

  Accessory Mount	17 x 1/4"-20 Females
  Tripod Mounting Thread	1/4"-20, 3/8"-16
  Material of Construction	Aluminum Alloy
  Dimensions	5.66 x 4.94 x 3.74" / 143.85 x 125.5 x 95 mm
  Weight	3.4 lb / 1.5 kg

  Box Dimensions (LxWxH)	14.1 x 12.6 x 12.3"

• RED DIGITAL CINEMA Touch 4.7" LCD for Select DSMC2 RED Cameras

  Type	Touchscreen LCD
  Resolution	1280 x 720
  Contrast Ratio	1000:1
  Brightness	400 cd/m²
  Pixel Density	315 PPI
  Color Depth	8-bit RGB, 4:4:4 progressive scan (16.7 million colors)
  Colors	70% NTSC
  Viewing Angle	±80° U/D/L/R
  Touch	Projected capacitive (PCAP), multi-touch
  Range of Motion	Tilt: +90 to -150°
  Connector	DSMC2 LCD/EVF pogo connector (26-pin)
  Mounting	2 x M4 captive screws
  Hood	Mounting: M2x0.4 x 4.5 mm (max depth)
  Power Consumption	4 W
  Operating Conditions	Temperature: 32 to 104°F / 0 to 40°C Humidity: 0 to 85% non-condensing
  Storage Conditions	Temperature: -4 to 122°F / -20 to 50°C Humidity: 0 to 85% non-condensing
  Dimensions	4.21 x 4.92 x 0.49" / 107 x 125 x 12.5 mm (with hinge)
  Weight	8.0 oz / 226.5 g

  Box Dimensions (LxWxH)	9.1 x 5.95 x 2.7"

• RED DIGITAL CINEMA DSMC2 V-Mount Battery Module

  Compatibility	RED BRICK, REDVOLT-V, and other standard V-lock batteries
  Power Connector	13-pin rear pogo connector
  Connectors	1 x 6-pin DC input (1B LEMO socket) 1 x 2-pin aux power output (D-Tap), 3 A 1 x 2-pin aux power output (0B LEMO), 3.8 A shared
  Mounting	4 x M4 captive mounting screws
  Operating Temperature	32 to 104°F / 0 to 40°C
  Storage Temperature	-4 to 122°F / -20 to 50°C
  Material	Aluminum alloy
  Dimensions	4.57 x 4.06 x 1.51" / 11.6 x 10.3 x 3.8 cm
  Weight	0.82 lb / 374 g

  Box Dimensions (LxWxH)	7.4 x 7.2 x 2.6"

• 2 x IDX System Technology DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port

  Mount / Series Type	V-Mount
  Chemistry	Lithium-Ion
  Capacity (Wh)	96 Wh
  Amp-Hours	6.6 Ah
  Output Voltage	14.4 VDC
  Maximum Load	10 A
  Accessory Port	2 x D-Tap 1 x USB Type-A
  Maximum Load (Accessory Port)	50 W, 5.4 A ( D-Tap )
  USB Output	5 V, 2.3 A
  Storage Temperature	-4 to 122°F / -20 to 50°C
  Charging Temperature	32 to 104°F / 0 to 40°C
  Discharging Temperature	-4 to 122°F / -20 to 50°C
  IP Rating	None
  Dimensions (W x H x D)	3.8 x 5.7 x 1.5" / 9.7 x 14.5 x 3.8 cm
  Weight	1.4 lb / 0.6 kg

  Box Dimensions (LxWxH)	6.95 x 4.5 x 1.95"

• IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply

  Mount Type	2 x V-mount
  Supported Chemistries	Lithium-ion and NiCad
  Charging Type	Sequential
  Input Voltage	100-240 VAC, 50/60 Hz
  Power Consumption	140 VA max.
  Quick Charge Current	2.7 A max.
  DC Output	4-pin XLR / 36 W max.
  Operating Temperature	23 to 104°F / -5 to 40°C
  Dimensions	3.4 x 4.2 x 5" / 9 x 11 x 13 cm
  Weight	Approx. 0.95 lb / 430 g

  Box Dimensions (LxWxH)	8.4 x 8.1 x 4.1"

• RED DIGITAL CINEMA DSMC Canon Mount (Aluminum)

  Camera Mount	RED DSMC Cinema
  Lens Mount	Canon EF

  Material	Aluminum
  Dimensions	H: 3.4 x W: 3.1 x D: 1.2" / H: 8.5 x W: 7.9 x D: 3.1 cm
  Weight	0.67 lb / 300 g

  Box Dimensions (LxWxH)	7.4 x 4.8 x 2.3"

• RED DIGITAL CINEMA RED MINI-MAG (120GB)

  Storage Capacity

  120 GB

  Maximum Write Speed	225 MB/s

  Operating Temperature	50 to 104°F / 10 to 40°C
  Storage Temperature	-4 to 122°F / -20 to 50°C
  Operating Humidity	20 to 80%
  Storage Humidity	10 to 90%

  Dimensions	2.87 x 1.77 x 0.31" / 7.3 x 4.5 x 0.8 cm
  Weight	0.1 lb / 0.1 kg

  Box Dimensions (LxWxH)	3.1 x 1.8 x 0.6"

• RED DIGITAL CINEMA RED STATION RED MINI-MAG (USB 3.1)

  Connections

  1 x USB 3.1 port 1 x RED MINI-MAG slot

  Box Dimensions (LxWxH)	9.55 x 5.85 x 2.65"

• RED DIGITAL CINEMA DSMC2 Universal Handle

  Box Dimensions (LxWxH)	3.7 x 1.2 x 1.2"

• RED DIGITAL CINEMA RED SIDEWINDER Multi-Tool

  Keys	Imperial Allen/Hex: 1/8", 5/32", 3/16" Metric Allen/Hex: M2.5, M3 Torx: T6, T8, T10, T20 Screwdriver: Flat (slotted), Phillips #1
  Threaded Holes	6 x 1/4"-20 8 x M4 4 x M3 4 x M2.5

  Box Dimensions (LxWxH)	3.5 x 2.6 x 0.8"

• RED DIGITAL CINEMA RED WORK MAT (18 x 24")

  Size	18 x 24" / 45.72 x 60.96 cm

  Box Dimensions (LxWxH)	12.55 x 10.2 x 3.05"

Rating

Discussion