|
User Manual for Redrock Micro Vincent Laforet's Low Profile DSLR Kit Click to enlarge the picture
Contents of the user manual for the Redrock Micro Vincent Laforet's Low Profile
- Product category: DSLR Video Supports & Rigs Redrock Micro
- Brand: Redrock Micro
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Redrock Micro DSLR Video Supports & Rigs
|
User manual for the Redrock Micro Vincent Laforet's Low Profile contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Redrock Micro product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Redrock Micro user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Redrock Micro product will considerably shorten its lifespan!
|
Product description Vincent Laforet's Low Profile DSLR Kit is a specially packaged Kit that gives you the ability to move quickly and easily while shooting stable DSLR photos and video. This basic, lightweight kit provides additional points of contact between you and the camera via a Redrock Micro body pad, baseplate, and single handgrip. Similar to the company's Running Man rig, Laforet's version adds a Zacuto Z-Finder Pro. This is essential when shooting video with DSLRs that don't have swiveling LCD screens or electronic viewfinders (such as the Canon 7D and 5D MkII), at the same time providing a fourth point of contact for increased stability. This simple kit is perfect for solo photojournalists and documentary filmmakers needing to stay light on their feet. - Redrock Micro 2-073-0001 Nano DSLR Baseplate The Redrock Micro Nano DSLR Baseplate allows you to conveniently attach and detach a camera to or from the Nano DSLR series rod support systems. Equipped with a set of screws, the DSLR baseplate supports Nikon and Canon cameras. The baseplate comes standard in the 2" configuration, but can be further upgraded to the 4" or 8" configurations.
- Allows you to conveniently attach or detach the camera to or from the Nano DSLR series rod support systems
- Comes with set of screws to support cameras from Nikon as well as Canon
- Comes standard in the 2" configuration and can be upgraded to the 4" or 8" configurations
- Redrock Micro microHandGrip (Blue) The Redrock Micro microHandGrip (Blue) combines a rubberized handgrip with an integrated all-metal rod clamp and thumb screw to provide a comfortable, non-slip handle. Attaches to 15mm rod/rail support systems such as Redrock's microShoulderMount and its DSLR support rigs.
- Redrock Micro microBrace Body Pad The microBrace Body Pad from Redrock Micro is an accessory that sits against your chest and provides a comfortable support for video DSLRs or other shoulder- and front-mount rigs. It offers an additional point of contact to stabilize rigs. This unit can be added to existing rigs with the microBrace accessory kit.
- This unit sits against your chest and provides a comfortable support for video DSLRs or other shoulder- and front-mount rigs
- It offers an additional point of contact to stabilize rigs
- This unit can be added to existing rigs with the microBrace accessory kit
- Redrock Micro Grip Rod - 4" With its integrated rod clamp and thumb screw, the Redrock Micro 4" Grip Rod is ideal for attaching rod-mounted accessories to any 15mm rail system. Forming a perfect combo with Redrock's microMount, the Grip Rod can be used to attach such accessories as monitor clamps, hand grips, and microphone shock mounts.
- Redrock Micro Grip Rod - 8" With its integrated rod clamp and thumb screw, the Redrock Micro 8" Grip Rod is ideal for attaching rod-mounted accessories to any 15mm rail system. Forming a perfect combo with Redrock's microMount, the Grip Rod can be used to attach such accessories as monitor clamps, hand grips, and microphone shock mounts.
- Redrock Micro microMount (w/out Spud) The Redrock Micro microMount (w/out Spud) is a flexible connector that allows just about any item to be connected to 15mm rods. microMounts can be used to configure entirely new camera support configurations by connecting additional rods and other microMounts.
- Zacuto Z-Finder Pro 2.5x Zacuto's Z-Finder Pro 2.5x optical viewfinder is a necessary tool for shooting sharp, stable video on DSLR cameras like the Canon 5D MkII, 7D, Nikon D90, D300s and others. Whether shooting handheld or on a tripod, the Z-Finder Pro turns your camera's 3" LCD screen into a clear, easy-to-focus viewfinder that lets you see your image in magnified detail even under the brightest sunlight. Just as crucially, the Z-Finder Pro provides an extra degree of handling comfort and a crucial point of contact--between camera and eye--that adds stability to any handheld video. The Pro 2.5x version offers an adjustable diopter that enlarges the LCD image by a factor of 2.5, so you can see every detail for pinpoint focus. The diopter's extended range of -4.75 and up makes it especially useful for those who are nearsighted. The Z-Finder attaches to your camera via the included Gorilla Baseplate and mounting frame, which mount to the bottom of your camera using a standard 1/4"-20 screw. A non-stick rubber backing ensures a tight fit and prevents scratching of the LCD screen, so that the entire Z-Finder snaps off easily when not in use. Once detached, the unit can hang conveniently around your neck from the included lanyard. Note: For use with taller-bodied cameras such as the Canon 1D Mark IV and Nikon D3S, an optional Z-MFT mounting frame is required.
- 40mm diameter lens for excellent light throughput
- Allows DSLR cameras to have correct form factor for video
- Field of view perfectly matches 3" LCD screen size
- Diopter range is -4.75 and up (unlimited with extender frames)--ideal for nearsighted shooters 1
Please Note: The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid sun magnification. close UPC: 654367035931 In the Box - 2-073-0001 Nano DSLR Baseplate uvbxtetzssyxtrtfazdwxrebxf
- Set Screws for Nikon and Canon Cameras
- 1 Year Warranty
- Zacuto - Z-Finder Pro 2.5x
Table of Contents
|
Upload User Manual
Have you got an user manual for the Redrock Micro Vincent Laforet's Low Profile DSLR Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Redrock Micro 2-073-0001 Nano DSLR Baseplate
| | | Box Dimensions (LxWxH) | 5.197 x 3.701 x 1.732" | - Redrock Micro microHandGrip (Blue)
| | | Box Dimensions (LxWxH) | 7.7 x 2.5 x 1.5" | - Redrock Micro microBrace Body Pad
| | | Box Dimensions (LxWxH) | 5.039 x 4.173 x 2.992" | - Redrock Micro Grip Rod - 4"
| Diameter | 15mm | | Length | 4" | | Weight | 4.23 oz (120g) | | | | Box Dimensions (LxWxH) | 5.748 x 2.362 x 1.417" | - Redrock Micro Grip Rod - 8"
| Diameter | 15mm | | Length | 8" | | Weight | 6 oz (170g) | | | | Box Dimensions (LxWxH) | 9.3 x 1.5 x 0.04" | - Redrock Micro microMount (w/out Spud)
| | | Box Dimensions (LxWxH) | 3.15 x 2.047 x 1.417" | - Zacuto Z-Finder Pro 2.5x
| | | Box Dimensions (LxWxH) | 12.35 x 9.1 x 6.35" |
Rating50% users recommend this product to others. And what about you?
This product has already been rated by 80 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Milano Carbon Fiber Tripod with B1 Head...
c.PLASMA X LARGE SIN/SION user manual-pdf
centrotherm PECVD platform c.PLASMA...
Streamlight Macrostream...
AOC curved gaming monitor...
User manual for Bowens ML500 Flash head ...
|
| Discussion |
Latest contributions to the discussion:
SQ 7 PDF
Name: Yash Deshmukh
Allen & Heath SQ-7 48-Channel 36-Bus
I want to download PDF ...
Business Card Studio 10
Name: Yvon
Summitsoft Business Card Studio Pro
Business Card Studio 10 will not print. Window 11
My printer will print anything else....
REQUESTING FOR QUOTE
Name: ALBERT GABRIEL
Auray X-Style Piano Bench & Double
RFQ 919
S/ N DESCRIPTION UNIT QTY
1 KEYBOARD
YAMAHA MODEL
PSR-S750 61-KEY
DIGITAL
WORKSTATION PCS 1
2 AURAY DOUBLE-X
KEYBOARD
STAND WITH
PULL LOCK MFR
#KSPL-2X PCS 1
3 YAMAHA YBA-611
ARTISTE SERIES
KEYBOARD BAG
FOR 61-KEY
PORTABLE
KEYBOARDS PCS 1
4 AURAY FP-P1...
Leatherman Micra
Name: Rebecca Burgess
Leatherman Micra Tool with Box
Please send me a user's manual for Leatherman Micra...
total cost of Casio CTK 3500 61 key manual
Name: Eric Sensiba
Casio CTK-3500 61-Key Keyboard with Touch
What is the total cost for a Casio CTK 3500 61 key Electronic keyboard manual including taxes and shipping t85739?...
|
|
