User manual
Rode NT-USB USB Desktop Studio Kit

User Manual for Rode NT-USB USB Desktop Studio Kit

• Product category: USB Microphones Rode
• Brand: Rode
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Rode USB Microphones

Product description

• Rode NT-USB USB Microphone The NT-USB USB Microphone from Rode is a cardioid, side-address USB microphone that is capable of capturing audio in up to 16-bit / 48 kHz resolution. It has an integrated headphone amplifier and 1/8" stereo headphone jack that allows for monitoring. The on-mic Direct Mix Control allows you to select between mic input and source input for monitoring.
  
  The NT-USB is compatible with the use of an optional camera kit. Included with the mic are a pop shield, a tripod desk stand, a ring mount, a 20-foot long USB cable, and a storage pouch.
  • 3.5mm stereo headphone jack for zero-latency monitoring
  • Direct mix control between mic input and source output
  • Compatible with Apple iPad with optional camera kit
  • Cardioid polar pattern
  UPC: 698813003969
• Auray RF-CPB-18 Reflection Filter (Plastic) Designed to help create clean vocal recordings in less-than-ideal recording environments, the plastic RF-CPB-18 Reflection Filter from Auray absorbs and diffuses external noise and room reflections. It can be used in any recording scenario that requires microphone isolation, such as tracking in an acoustically untreated room, untreated rehearsal spaces, project and home studios, and professional studios where additional isolation is needed.
  
  The filter features high-density, open-cell acoustic foam wrapped in an ABS plastic curved screen. Its front sliding bracket and rear adjustment rail easily allows you to adjust its height and depth for precise microphone placement. Thanks to its standard 5/8"-27 threaded adapters, the RF-CPB-18 is compatible with most microphone stands, clips, and shockmounts. It is also ideal for desktop recording and broadcast applications when used with a desktop mic stand that features a weighted metal base (not included). The lightweight, 3-pound body lends to portability while its ABS construction assures its durability.
  • Compact solution for providing sound isolation for vocal or voice over recording in untreated spaces
  • High-density open-cell acoustic foam minimizes room ambiance and diffuses external noise to isolate your microphone
  • Curved shield design ensures dry and clean vocal and voiceover tracks while attenuating external noise
  • The sliding bracket and adjustable height rail ensures microphone placement for optimal performance
  • Adapters with industry-standard 5/8"-27 threaded studs and sockets are compatible with mic stands, shock mounts, and mic clips with a 5/8"-27 post
  • The durable ABS plastic shield is rigid and lightweight, and with all the mounting hardware only weighs 3 lbs
  UPC: 847628580305
• Auray TT-6110-BL Desktop Microphone Stand (Black) The black TT-6110-BL Desktop Microphone Stand from Auray features a round-cast metal base and has a fixed 5.5" height. It can be used for podcasting, voice-overs, video conferencing, and other home- or project-studio applications. With five non-slip rubber feet to ensure that the stand doesn't move or shift on smooth or polished surfaces, the desktop microphone stand is designed with a thicker shaft to support heavier condenser microphones. Built with a 5/8"-27 threaded mount, it is compatible with most shockmounts and microphone clips.
  Compact
  • The compact mic stand is ideal for tabletop audio applications such as podcasts, voice-overs, and video conferences—this mic stand is small enough to take with you to remote locations and easily fits into a gear bag or briefcase
  Standard 5/8"-27 Mount
  • The microphone mount features a 5/8"-27 thread, which is compatible with most microphone clips and shockmounts
  Fixed-Height Shaft
  • At a fixed height of 5.5", the mic shaft is the ideal height for desktop applications, and is suitable to support heavy, studio condenser microphones
  Weighted Base and Non-Slip Rubber Feet
  • Built for stability, the round-cast metal base provides steadiness for a microphone and shockmount, and the five non-slip rubber feet ensure the mic stand won't move, even when placed on smooth, highly-polished surfaces
  UPC: 847628598409
• Audio-Technica ATH-M50x Monitor Headphones (Black) The black ATH-M50x Monitor Headphones from Audio Technica are designed for use in critical studio mixing and tracking as well as for DJ monitoring applications. They feature 45mm Neodymium drivers with copper-clad aluminum voice coils that provide an extended frequency response from 15Hz to 28kHz. The headphones have a circumaural, around-the-ear design that provides sound isolation in loud environments. The ATH-M50x's ear cups can be swiveled 90-degrees, allowing for single-ear monitoring. The headphones have a detachable single-sided cable system, and a 3-meter coiled cable, a 3-meter straight cable, and a 1.2-meter straight cable are included. When not in use, the ATH-M50x can be folded down and stored in the included carry pouch.

• NT-USB USB Microphone cxxwbdfcwazrvasvuxeybzyrcdcwydcfqd
• Pop Shield
• Tripod Desk Stand
• Ring Mount
• 20' USB Cable
• Storage Pouch
• Limited 2-Year Warranty

• Auray - RF-CPB-18 Reflection Filter (Plastic)

• Auray - TT-6110-BL Desktop Microphone Stand (Black)

• Audio-Technica - ATH-M50x Monitor Headphones (Black)

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Rode NT-USB USB Microphone

  Sound Field	Mono
  Operating Principle	Pressure Gradient
  Diaphragm	0.5" / 12.70 mm
  Polar Pattern	Cardioid
  Frequency Range	20 Hz to 20 kHz
  Maximum SPL	110 dB SPL

  Bit Depth	16-Bit
  Sample Rate	48 kHz
  Available Port	USB (Interface Unspecified)

  Output Connectors	1 x USB (Type Unspecified)
  Headphone Connector	1 x 1/8" (3.5 mm)
  Length	7.24" / 184 mm
  Diameter	1.97" / 50 mm
  Weight	1.14 lb / 520 g

  Box Dimensions (LxWxH)	14.6 x 11.5 x 4.3"

• Auray RF-CPB-18 Reflection Filter (Plastic)

  Dimensions (WxHxD)	19.3 x 11.4 x 7.1" (49 x 29 x 18 cm) Height extendable from 11.4 to 17.5" (29 to 44.5 cm)
  Weight	3 lb (1.4 kg), with mounting hardware

  Box Dimensions (LxWxH)	19.0 x 14.0 x 8.0"

• Auray TT-6110-BL Desktop Microphone Stand (Black)

  Material of Construction	Steel
  Base Type	Round cast-metal base
  Thread Size	5/8"-27 thread for microphone mounts
  Base Diameter	6.0" (15.2 cm)
  Height Range	9" (22.9 cm) with base
  Weight	2.1 lb (0.95 kg)

  Box Dimensions (LxWxH)	7.3 x 7.15 x 1.8"

• Audio-Technica ATH-M50x Monitor Headphones (Black)

  Driver Size	1.8" / 45 mm
  Magnet Type	Neodymium
  Voice Coil	Copper-Clad Aluminum Wire
  Design	Over-Ear (Circumaural)
  Earcup Style	Closed-Back

  Frequency Response	15 Hz to 28 kHz
  Sensitivity	99 dB
  Impedance	38 Ohms
  Maximum Power Handling	1600 mW

  Audio Connector	1/8" (3.5 mm)
  Adapter (Included)	1/4" (6.3 mm)

  Detachable	Yes

  Weight	10 oz / 285 g

  Box Dimensions (LxWxH)	11.5 x 10.2 x 4.1"

Rating

Discussion