|
User Manual for Rode NTG3 Precision RF-Biased Shotgun Mic with Shoe Adapter & Rycote Super-Softie Wind Shield Kit Click to enlarge the picture
Contents of the user manual for the Rode NTG3 Precision RF-Biased Shotgun Mic
- Product category: Shotgun Microphones Rode
- Brand: Rode
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Rode Shotgun Microphones
|
User manual for the Rode NTG3 Precision RF-Biased Shotgun Mic contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Rode product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Rode user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Rode product will considerably shorten its lifespan!
|
Product description The Rode NTG3 Precision RF-Biased Shotgun Mic with Shoe Adapter & Rycote Super-Softie Wind Shield Kit from comes with everything you need to start making professional outdoor recordings that are free of noise and interference caused by nearby RF sources such as radio antennas, WiFi networks, internet devices, power lines, etc. The kit comes with the black Rode NTG3 RF-biased shotgun mic, InVision video hot shoe adapter, 1.5' XLR M to angled XLR F mic cable, and the 18cm Rycote Super-Softie windshield to cut down on wind caused noise. - Rode NTG3 Precision RF-Biased Shotgun Microphone (Black) The black Rode NTG3 Shotgun Microphone is a professional shotgun microphone that delivers a few unique qualities in order to meet the demands of today's broadcast audio engineers and boom operators. The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WiFi networks, internet devices, power lines, etc. The microphone is also built to withstand the rigors of adverse weather conditions. Of course special attention is paid to the accurate, directional pickup characteristics and its frequency response, sensitivity and low noise floor, which result in pristine audio quality. The NTG3 shotgun microphone is an ideal solution for outdoor ENG and studio applications.
- RF Rejection
- The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WiFi networks, internet devices, power lines, etc.
- Withstands Adverse Conditions
- The microphone is constructed to withstand adverse weather conditions for more stable use outdoors.
- Supercardioid Line+Gradient Pickup
- The supercardioid, shotgun characteristics provide excellent off-axis rejection, focused pickup and longer range.
UPC: 698813002696 - Rycote InVision Video Hot Shoe Microphone Suspension - Lyre Shockmount The InVision Video Hot Shoe Microphone Suspension from Rycote slides into the hot shoe mount of most commercial camcorders to hold microphones with diameters from 19-25mm, while protecting against camera motor noise and vibrations. It is designed to enable camcorder users and videographers to capture the best possible sound for their productions using external camera-mounted microphones.The InVision Video uses the patented Lyre Suspension webs with a molded grip design to prevent your mic from slipping or twisting. For ease in finding the right mounting position, the InVision Video rotates freely 360° on a slotted 4" (100mm) mounting bar. The cradle can slide freely on this slotted bar to keep your mic out of the shot.
- 19 to 25mm Mounting Cradle
- The cradle included with this system accommodates microphone diameters measuring between 19 to 25mm. The interior is treated with a soft-grip surface for a perfect, non-slip fitting
- Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 1.5' (0.45 m), Black The black Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable (1.5') is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and to provide protection against EMI, RFI, and static noise.
Premium Performance 3000 Series cables are made from 24 AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection. - 95% dual-spiral shielding offers protection from EMI and RFI noise.
- Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable's signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable's core.
- 24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.
- Cotton yarn reduces electrostatic and microphonic noise.
- All solder points shrink-wrapped for protection.
- Neutrik XX silver connectors offer high conductivity.
- Caged type contact and improved ground contact.
UPC: 847628558229 - Rycote 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole) The standard hole Rycote 18cm Super-Softie Wind Shield for Shotgun Mics features an aerodynamic shape and surface structure made from the company's 3D-Tex material, which allows for attenuation of wind noise with acoustic transparency. It is ideal for a variety of sound recording applications including video, ENG and more.
The 18cm Super-Softie has no rigid internal structure, thus it causes virtually no polar pattern distortion. It's robust design has been engineered for use in challenging environments, and if it becomes rain-soaked, it can be squeezed out and shaken dry quickly. Also, if it becomes coated with dust it can be rinsed quickly without affecting its performance. - Fits these and similar sized mics:
-
- AKG C 568 EB
- AKG CK 68 ULS C460B Full
- AKG CK 68 ULS C460B Red
- BeyerDynamic MCE 86 N (C) S
- BeyerDynamic MCE 87vs
- RODE NTG-3
- Sanken CS-3e
- Sennheiser ME 66 K6
- Sennheiser ME 80 K3U
- Sennheiser MKH 416
- Sennheiser MKH 418
- Sony ECM 670
- Sony ECM 678
- Sony ECM 680S
In the Box - NTG3 Precision RF-Biased Shotgun Microphone (Black) feqquyxvdywaesyusdebrwsw
- Water Resistant Aluminum Storage Case
- Windshield
- Zip Pouch
- Microphone Clip
- Limited 10-Year Warranty
- Rycote - InVision Video Hot Shoe Microphone Suspension - Lyre Shockmount
- Kopul - Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 1.5' (0.45 m), Black
- Rycote - 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole)
Table of Contents
|
Upload User Manual
Have you got an user manual for the Rode NTG3 Precision RF-Biased Shotgun Mic with Shoe Adapter & Rycote Super-Softie Wind Shield Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Rode NTG3 Precision RF-Biased Shotgun Microphone (Black)
| Transducer | Condenser | | Polar Pattern | Line-gradient supercardioid | | Frequency Response | 40 Hz to 20 kHz | | Dynamic Range (Typical) | 117 dB | | Signal-to-Noise Ratio | 81 dB SPL (A-weighted) | | Maximum Input Sound Level | 130 dB | | Power Requirements | 48V Phantom power | | Nominal Impedance | 25Ω | | Output Connectors | 3-pin XLR | | Pad | No | | Low Frequency Roll-Off | No | | Dimensions (L x Diam) | 10 x 0.74" (255 x 19 mm) | | Weight | 5.74 oz (163 g) | | | | Box Dimensions (LxWxH) | 13.1 x 6.7 x 3.2" | - Rycote InVision Video Hot Shoe Microphone Suspension - Lyre Shockmount
| Mounting Thread | Hot shoe | | Mounting Options | Diameter: 0.75 - 1" (19 - 25mm)
Length: 2 - 12" (50 - 300mm) | | Length | Mic Grip: 5.5" (65mm) | | Weight | 3 oz (84g) | | | | Box Dimensions (LxWxH) | 5.1 x 3.1 x 2.9" | - Kopul Premium Performance 3000 Series XLR M to Angled XLR F Microphone Cable - 1.5' (0.45 m), Black
| Connector 1 | 3-Pin XLR Male | | Connector 2 | 3-Pin XLR Female Right-Angle | | Cable Length | 1.5' / 0.45 m | | Shielding | 95% Spiral | | Conductor Material | Oxygen-Free Copper (OFC) | | Number of Conductors | 2 | | Wire Gauge | 24 AWG | | Contact Plating | Silver | | Jacket Type | Polyvinyl Chloride (PVC) | | Insulation Type | Polyethylene | | | | Box Dimensions (LxWxH) | 4.8 x 3.1 x 0.9" | - Rycote 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole)
| Compatible Mic Diameter | 0.748 to 0.87" / 19 to 22 mm | | Inner Depth | 7" / 17.8 cm | | Outer Diameter | 2.8 to 3.9" / 70 to 100 mm | | Length | 9.5" / 240 mm | | Weight | 3.7 oz / 105 g | | | | Box Dimensions (LxWxH) | 11.2 x 4.4 x 4.4" |
Rating50% users recommend this product to others. And what about you?
This product has already been rated by 10 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Milano Carbon Fiber Tripod with B1 Head...
c.PLASMA X LARGE SIN/SION user manual-pdf
centrotherm PECVD platform c.PLASMA...
Streamlight Macrostream...
AOC curved gaming monitor...
User manual for Bowens ML500 Flash head ...
|
| Discussion |
Latest contributions to the discussion:
SQ 7 PDF
Name: Yash Deshmukh
Allen & Heath SQ-7 48-Channel 36-Bus
I want to download PDF ...
Business Card Studio 10
Name: Yvon
Summitsoft Business Card Studio Pro
Business Card Studio 10 will not print. Window 11
My printer will print anything else....
REQUESTING FOR QUOTE
Name: ALBERT GABRIEL
Auray X-Style Piano Bench & Double
RFQ 919
S/ N DESCRIPTION UNIT QTY
1 KEYBOARD
YAMAHA MODEL
PSR-S750 61-KEY
DIGITAL
WORKSTATION PCS 1
2 AURAY DOUBLE-X
KEYBOARD
STAND WITH
PULL LOCK MFR
#KSPL-2X PCS 1
3 YAMAHA YBA-611
ARTISTE SERIES
KEYBOARD BAG
FOR 61-KEY
PORTABLE
KEYBOARDS PCS 1
4 AURAY FP-P1...
Leatherman Micra
Name: Rebecca Burgess
Leatherman Micra Tool with Box
Please send me a user's manual for Leatherman Micra...
total cost of Casio CTK 3500 61 key manual
Name: Eric Sensiba
Casio CTK-3500 61-Key Keyboard with Touch
What is the total cost for a Casio CTK 3500 61 key Electronic keyboard manual including taxes and shipping t85739?...
|
|
