User manual
Rode VideoMic Camera Mounted Shotgun Mic

User Manual for Rode VideoMic Camera Mounted Shotgun Mic & Dead Cat Wind Muff Kit

• Product category: Shotgun Microphones Rode
• Brand: Rode
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Rode Shotgun Microphones

Product description

• Rode VideoMic with Rycote Lyre Suspension System The VideoMic with Rycote Lyre Suspension System from Rode is a shotgun microphone that can easily be mounted on a DSLR camera. It features a Rycote suspension system that attaches to the camera's shoe. The VideoMic is lightweight, and when mounted on a camera it does not appear in the frame. The VideoMic can also mount to Rode's boompoles for elevated audio capture. Its supercardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances.
  
  The included Rycote Lyre is a non-elasticated suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticated suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness.
  
  An attached, coiled cable terminates to a 1/8" (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9V battery (sold separately). The microphone will run for approximately 100 hours on a single battery.
  Barrel-Canceling Pickup
  • The Rode Video Mic functions as a true line+gradient microphone with a supercardioid pattern in the front and a barrel that cancels side audio. The result is maximum pickup of the source in highly ambient and noisy environments.
  Selectable 10 or 20 dB Pad
  • When capturing audio in loud environments, the VideoMic offers built-in attenuation. The selectable 10 or 20 dB pad lessens the microphone's sensitivity, allowing it to handle higher SPL levels without sacrificing clarity.
  High-Pass Filter Switch
  • A high-pass filter switch eliminates room ambiance and noise below 80 Hz. This results in improved intelligibility while recording around machinery, wind or close proximities.
  Internal Power
  • The condenser element is powered with a standard 9V battery for up to 100 hours (approximately).
  UPC: 698813002900
• Rode Dead Cat Wind Muff for VideoMic, NTG1 and NTG2 Microphones The Rode Dead Cat Wind Muff is a zip-on furry cover with deep artificial fur that fits snugly over the Rode VideoMic or the NTG1 and NTG2 microphones. The Wind Muff greatly reduces wind noise when recording in windy conditions.
  Versatility
  • The Rode Dead Cat Wind Muff is compatible with the Rode VideoMic, NTG1 or NTG2.
  Design
  • In combination with the miniscreen, the Rode Deads Cat Wind Muff's furry, zip-on cover design drastically decreases wind noise during inclement weather.
  UPC: 698813000616

• VideoMic with Rycote Lyre Suspension System acccfqyrxqdbrcwysae
• Rycote Suspension System
• Windscreen
• Limited 1-Year Warranty

• Dead Cat Wind Muff for VideoMic, NTG1 and NTG2 Microphones

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Rode VideoMic with Rycote Lyre Suspension System

  Operating Principle	Line Gradient
  Transducer	Condenser
  Diaphragm	0.50" / 12.70 mm
  Polar Pattern	Supercardioid
  Frequency Range	40 Hz to 20 kHz
  Equivalent Noise Level	20 dB A-Weighted
  Maximum SPL	134 dB SPL
  Pad	-10 dB -20 dB
  THD	1%
  Impedance	200 Ohms
  Sensitivity	-38 dB at 1 kHz
  Low-Cut Filter	@ 80 Hz

  Output Connectors	1 x 1/8" (3.5 mm) TRS
  Battery Type	1 x 9 V
  Length	2.56" / 65 mm
  Diameter	4.02" / 102 mm
  Weight	6.21 oz / 176 g

  Box Dimensions (LxWxH)	11.7 x 5.3 x 3.4"

• Rode Dead Cat Wind Muff for VideoMic, NTG1 and NTG2 Microphones

  Compatible Mic Diameter	0.827 to 0.87" / 21 to 22 mm
  Inner Depth	8" / 20.32 cm
  Material	Faux Fur

  Box Dimensions (LxWxH)	8.0 x 4.0 x 1.0"

Rating

Discussion