|
User Manual for Rogue Photographic Design Flashbender 2 Portable Lighting Kit Click to enlarge the picture
Contents of the user manual for the Rogue Photographic Design Flashbender 2 Portable
- Product category: Flash Modifiers Rogue Photographic Design
- Brand: Rogue Photographic Design
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Rogue Photographic Design Flash Modifiers
|
User manual for the Rogue Photographic Design Flashbender 2 Portable contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Rogue Photographic Design product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Rogue Photographic Design user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Rogue Photographic Design product will considerably shorten its lifespan!
|
Product description For complete control over your on-camera flash unit, the Flashbender 2 Portable Lighting Kit from Rogue provides photographers with a variety of modifiers that will enable bouncing light, flagging off areas, diffusing light, limiting light spill, beam angle, and adjusting the color of the flash. In addtion, this kit comes with a travel bag for easily bringing this system with you.The kit includes the large and small FlashBender 2 Reflectors that are positioned to control where the light will fall on your scene. They also accept the included diffusion panels for enlarging and softening the light output for a softbox look. The Flash Grid 2 3-in-1 Stacking System has 45° and 25° grids that can be stacked for a 16° beam angle.All models have a belt and buckle attachment system, and are made of flexible and lighter weight materials. There are two gel kits bundled with the other accessories as well, one for use with the grids and one for use directly on the flash head or with reflectors. These feature 20 different colors for correction or creativity. - FlashBender 2 Reflector (Large, White) Take control of the light from your on-camera flash with the white, large FlashBender 2 Reflector from Rogue. This updated version uses a belt & buckle attachment system as well as newer materials that are more flexible and up to 20% lighter in weight.This reflector measures 10 x 11" and has 3 rods for adjusting the position of the reflective surface. It allows you easily to bounce the light exactly where you need it and limit it from spilling into unwanted areas of the photograph. Additionally, it packs flat for easily storing it in your gear bag. UPC: 751751040233
- FlashBender 2 Reflector (Small, White) Take control of the light from your on-camera flash with the white, small FlashBender 2 Reflector from Rogue. This updated version uses a belt & buckle attachment system as well as newer materials that are more flexible and up to 20% lighter in weight.This reflector measures 10 x 7" and has 2 rods for adjusting the position of the reflective surface. It allows you easily to bounce the light exactly where you need it and limit it from spilling into unwanted areas of the photograph. Additionally, it packs flat for easily storing it in your gear bag. UPC: 751751040240
- 3-in-1 Flash Grid with 3-Gel Starter Kit Limit light spill and take control of the light beam with the 3-in-1 Flash Grid with 3-Gel Starter Kit from Rogue. This updated model utilizes a belt and buckle attachment system for a more secure hold on your flash head.It comes with 45 and 25° grids, which can be used independently or stacked to produce a 16° beam angle. Additionally, a storage pouch is included along with Dark Salmon, Oklahoma Yellow, and Steel Green gels. UPC: 751751040103
- Diffusion Panel (Large) The Diffusion Panel (Large) from Rogue is a quick and easy way to modify lighting using a Large FlashBender reflector (not included) with your portable flash. This 9 x 8" diffusion panel softens and spreads the light when attached to a FlashBender reflector using the hook-and-loop attachments sewn along the edges of the diffuser. The diffuser packs flat and takes up almost no room in your camera bag; it is the ideal light modifier.
- Softens and diffuses light
- Attaches quickly using hook and loop sewn along the edges
- Packs flat for easy transport and storage
- For use with FlashBender reflectors
UPC: 751751040080 - Diffusion Panel (Small) The Diffusion Panel (Small) from Rogue is a quick and easy way to modify lighting using a Small FlashBender reflector (not included) with your portable flash. This 9 x 4.5" diffusion panel softens and spreads the light when attached to a FlashBender reflector using the hook-and-loop attachments sewn along the edges of the diffuser. The diffuser packs flat and takes up almost no room in your camera bag; it is the ideal light modifier.
- Softens and diffuses light
- Attaches quickly using hook and loop sewn along the edges
- Packs flat for easy transport and storage
- For use with FlashBender reflectors
UPC: 751751040097 - Rogue Gels Lighting Filter Kit for Rogue Grid (Set of 20) The Rogue Gels Lighting Filter Kit for Rogue Grid (Set of 20) from ExpoImaging makes it easy to bring a more dramatic color sense to all of your photographs using the Rogue Grid. Chose from a variety of Lee filters for reds, yellows, blues, and greens to punch up an image with color, or create mood. Or, use the correction gels to balance your flash to ambient light. Each gel has the LEE name, the gel's measured f/stop loss value, and (when appropriate) the corresponding Kelvin color temperature correction and camera white balance icon, all printed directly onto the gel. Stated f/stop loss values are measured using a Sekonic light meter in a controlled test. These values compare the metered exposure of the bare flash with the metered exposure using the Rogue Gels placed over the flash head.
- Large variety of color and correction filters, cut to fit the Rogue Grid Bezel
- Can be inserted in front of the honeycomb grids
- Correction filters:
1/2 CTB (3200K to 4300K); Full CTO (6500K to 3200K); 1/2 CTO (6500K to 3800K); 1/4 CTO (6500K to 4600K); Plus Green (cc30 Green); Heavy Frost Diffusion - Color filters:
Yellow/Red Filters: Chocolate; Smokey Pink; Follies Pink; Bright Red; Rust; Dark Salmon; Oklahoma Yellow; Medium Yellow
Green/Blue Filters: Deep Purple; Special KH Lavender; Just Blue; Medium Blue Green; Steel Green; Moss Green UPC: 751751040066 - Rogue Gels Universal Lighting Filter Kit (Set of 20) The Rogue Gels Universal Lighting Filter Kit (Set of 20) from ExpoImaging makes it easy to bring a more dramatic color sense to all of your photographs. Chose from a variety of Lee filters for reds, yellows, blues, and greens to punch up an image with color, or create mood. Or, use the correction gels to balance your flash to ambient light. Flash coverage area measures 3 x 2.5" (7.6 x 6.3 cm)--total filter length with tabs is 6" (15.2 cm) Each gel has the LEE name, the gel's measured f/stop loss value, and (when appropriate) the corresponding Kelvin color temperature correction and camera white balance icon, all printed directly onto the gel. Stated f/stop loss values are measured using a Sekonic light meter in a controlled test. These values compare the metered exposure of the bare flash with the metered exposure using the Rogue Gels placed over the flash head.
- Large variety of color and correction Lee filters (3 x 2.5" (7.6 x 6.3 cm) coverage area)
- Flexible Gel-Band included to attach gel to any shoe mount flash
- Correction filters:
1/2 CTB (3200K to 4300K); Full CTO (6500K to 3200K); 1/2 CTO (6500K to 3800K); 1/4 CTO (6500K to 4600K); Plus Green (cc30 Green); Heavy Frost Diffusion - Color filters:
Yellow/Red Filters: Chocolate; Smokey Pink; Follies Pink; Bright Red; Rust; Dark Salmon; Oklahoma Yellow; Medium Yellow
Green/Blue Filters: Deep Purple; Special KH Lavender; Just Blue; Medium Blue Green; Steel Green; Moss Green UPC: 751751040073 In the Box Bundle Items FlashBender 2 Reflector (Large, White) FlashBender 2 Reflector (Small, White) 3-in-1 Flash Grid with 3-Gel Starter Kit Diffusion Panel (Large) Diffusion Panel (Small) Rogue Gels Lighting Filter Kit for Rogue Grid (Set of 20) - 20 x Assorted Lee Color and Correction Filters
- Padded Storage Pouch with Dividers
Rogue Gels Universal Lighting Filter Kit (Set of 20) - 20 x Assorted Lee Color and Correction Filters
- Padded Storage Pouch with Dividers
Also Includes - Travel Bag
- Limited 1-Year Warranty
Table of Contents
|
Upload User Manual
Have you got an user manual for the Rogue Photographic Design Flashbender 2 Portable Lighting Kit in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - FlashBender 2 Reflector (Large, White)
| Modifier Type | Reflector | | Attachment Method | Strap | | Dimensions | H: 10.0 x W: 11.0" / H: 254.0 x W: 280.0 mm | | | | Box Dimensions (LxWxH) | 11.7 x 5.6 x 0.7" | - FlashBender 2 Reflector (Small, White)
| Modifier Type | Reflector | | Attachment Method | Strap | | Dimensions | H: 10.0 x W: 7.0" / H: 254.0 x W: 178.0 mm | | | | Box Dimensions (LxWxH) | 9.1 x 5.6 x 0.7" | - 3-in-1 Flash Grid with 3-Gel Starter Kit
| Modifier Type | Color Filter
Grid | | Attachment Method | Strap | | Dimensions | H: 3.6 x W: 1.2" / H: 92.0 x W: 30.0 mm | | Weight | 3.9 oz / 110 g | | | | Box Dimensions (LxWxH) | 8.1 x 5.6 x 2.5" | - Diffusion Panel (Large)
| Modifier Type | Shoot-Through Panel | | Dimensions | H: 9.0 x W: 8.0" / H: 22.9 x W: 20.3 cm | | | | Box Dimensions (LxWxH) | 15.0 x 6.0 x 0.4" | - Diffusion Panel (Small)
| Modifier Type | Reflector | | Dimensions | H: 9.0 x W: 4.5" / H: 22.9 x W: 11.4 cm | | | | Box Dimensions (LxWxH) | 15.0 x 7.0 x 0.4" | - Rogue Gels Lighting Filter Kit for Rogue Grid (Set of 20)
| Modifier Type | Color Filter | | | | Box Dimensions (LxWxH) | 7.1 x 5.5 x 1.9" | - Rogue Gels Universal Lighting Filter Kit (Set of 20)
| Modifier Type | Color Filter | | Dimensions | H: 3.0 x W: 2.5" / H: 76.0 x W: 63.0 mm | | | | Box Dimensions (LxWxH) | 12.0 x 4.6 x 0.5" |
Rating96% users recommend this product to others. And what about you?
This product has already been rated by 60 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
| Discussion |
Latest contributions to the discussion:
TR-P5TP pink robot dog
Name: Allyson
Top Race Race & Remote Control
Hello we are having issues with the remote to the robot dog it just flashes a red light will not sync to the robot dog what so ever the dog is charged and batteries have been changed out more the once, Can i get help trouble shooting the issue or if something needs to be sent bac...
Query
Name: Libba Guyton
Canon Pixma TS9520 Wireless All-In-One Printer
Support Code 1851
Multi purpose tray guide is open. Close the guide and press OK.
Done and the same message continue to appear....
Manual
Name: Grant
Konus KonuStart-700B 60mm f 11.6 Refractor
Please send user manual for Konustart-700B to above email address....
Fs3x manual
Name: Randy Reid
DigiTech FS3X Three-Function Foot Switch
I need manual
...
adding additional chime
Name: Stan Stansfield
OhmKat Video Doorbell Power Supply for
The additional chime does not work and is closure to the transmitter then the first one. I plugged in the additional chime and set the volume and chime. The original chime works when the additional chime is plugged in to new location. The original chime is located further away bu...
|
|
