User manual
sE Electronics X1 S Studio Bundle

User Manual for sE Electronics X1 S Studio Bundle - Vocal Recording Package with Reflection Filter

• Product category: Large Diaphragm Condenser sE Electronics
• Brand: sE Electronics
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for sE Electronics Large Diaphragm Condenser

Product description

• X1 S Large-Diaphragm Cardioid Condenser Microphone The SE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilizes a gold-plated XLR 3-pin jack and requires 48V phantom power. The metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.
  • The X1 S utilizes a handcrafted condenser capsule, meticulously constructed and tuned in SE's capsule room by technicians with decades of experience
  • Its internal redesign allows for improved sensitivity, dramatically increased SPL handling (up to 160 dB), and a large reduction in self-noise
  • The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques
  • Selectable at either 80 Hz or 160 Hz, the two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques
  • The X1 S's all-metal chassis provides efficient rejection of electrical interference and noise
  • A gold-plated XLR connector ensures loss-free, reliable signal connection
  UPC: 819032011188
• RF-X Reflection Filter The RF-X Reflection Filter from sE Electronics prevents unwanted audio ambience from contaminating your vocal tracks in untreated acoustic environments. This acoustic filter uses the same patented technology as the RF-Pro. Its lightweight body and clamp assembly makes the RF-X simple and easy to use.
  
  The RF-X is lighter than its predecessors, but still maintains durability. It features a four-layer acoustic filter design comprising the outer composite panel itself, a wool fabric layer, an air gap layer and an inner acoustic foam layer. The air gap ensures that recordings exhibit almost no sound coloration when the RF-X filter is used.
  
  The RF-X clamp assembly's lightweight design can be used on almost any microphone stand. It allows vertical mounting only, making it ideal for vocal recording. UPC: 819032010013
• Isolation Pack - Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II Series The sE Electronics Isolation Pack is a quick-release shock mount that is designed specifically for the Magneto, X1 Series (sE X1, X1 Vocal Pack and X1 Studio Bundle) and sE 2200a II series (sE2200a II MP and sE2200a II C) of microphones. It can be used by professionals and amateurs alike to capture vocals free of pops caused by vocal plosives and low end rumble and noise caused by unwanted vibrations.
  • Pop shield features metal as opposed to a fabric shield for durability
  UPC: 819032010112

• Mic Clip

• Thread Adapter

• Limited 2-Year Warranty (Extendable to Three Years via Online Registration)

• Microphone Stand Mounting Clamp

• Limited 3-Year "Zero Downtime" Free Replacement Warranty

• Limited 20-Year Warranty

• Limited 2-Year Warranty

Also Includes

• 10' / 3 m Microphone Cable
• Limited 2-Year Warranty (Extendable to Three Years via Online Registration)

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• X1 S Large-Diaphragm Cardioid Condenser Microphone

  Sound Field	Mono
  Operating Principle	Pressure Gradient
  Transducer	Condenser
  Diaphragm	1" / 25.40 mm
  Tube	No
  Polar Pattern	Cardioid
  Frequency Range	20 Hz to 20 kHz
  Signal to Noise Ratio	85 dB
  Equivalent Noise Level	9 dB A-Weighted
  Maximum SPL	140 dB SPL 150 dB with 10 dB pad engaged 160 dB with 20 dB pad engaged
  Pad	-10 dB -20 dB
  Impedance	125 Ohms
  Load Impedance	1 kOhms
  Sensitivity	30 mV/Pa
  Low-Cut Filter	6 dB/Octave @ 80 Hz 6 dB/Octave @ 160 Hz

  Output Connectors	1 x 3-Pin XLR
  Operating Current Consumption	6 mA
  Operating Voltage	48 V
  Length	6.65" / 169 mm
  Diameter	2.28" / 58 mm
  Weight	15.70 oz / 445 g

  Box Dimensions (LxWxH)	10.6 x 5.1 x 3.9"

• RF-X Reflection Filter

  Dimensions	Not Specified by Manufacturer
  Weight	Not Specified by Manufacturer

  Box Dimensions (LxWxH)	16.5 x 14.0 x 8.2"

• Isolation Pack - Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II Series

  Box Dimensions (LxWxH)	12.2 x 7.0 x 4.1"

Rating

Discussion