|
User Manual for SecuGen Corporation Hamster Pro Duo SC PIV Fingerprint Scanner and Card Reader Click to enlarge the picture
Contents of the user manual for the SecuGen Corporation Hamster Pro Duo SC
- Product category: Keypads & Readers SecuGen Corporation
- Brand: SecuGen Corporation
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for SecuGen Corporation Keypads & Readers
|
User manual for the SecuGen Corporation Hamster Pro Duo SC contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any SecuGen Corporation product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official SecuGen Corporation user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a SecuGen Corporation product will considerably shorten its lifespan!
|
Product description The Hamster Pro Duo SC/PIV Fingerprint Scanner and Card Reader from SecuGen Corporation is an FIPS 201 (PIV) and Mobile ID FAP 20 optical fingerprint scanner and contact card reader. It combines the SecuGen U20 fingerprint sensor and Identiv CLOUD 2100R contact card reader to provide dual-layer security, authentication, and access control.
Auto-On technology allows for automatic finger detection. Smart Capture scanning technology is capable of capturing fingerprints from difficult fingers, such as those with dry, wet, scarred, or aged skin. Additionally, the Hamster Pro Duo works in challenging environments and conditions such as direct sunlight.
This device does not require an additional power supply thanks to being USB-powered. It is scratch-, impact-, vibration-, and electrostatic shock-resistant. - Automatic finger detection technology
- Built-in contact smart card reader
- Maintenance-free optical fingerprint sensor
- Sensor is resistant to scratches, impact, vibration, and electrostatic shock
- USB-powered, no additional power supply required
- Fast and accurate verification, latent print removal, encryption of fingerprint templates, fingerprint device recognition, and multi-device connection when used with SecuGen software
- Compatible with Windows 10, 8.1, 8, 7, Server 2012, and 2008 R2, Android 3.1 and above, and Linux
In the Box SecuGen Corporation Hamster Pro Duo SC/PIV Fingerprint Scanner and Card Reader Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the SecuGen Corporation Hamster Pro Duo SC PIV Fingerprint Scanner and Card Reader in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersSecuGen Corporation Hamster Pro Duo SC/PIV Specs | Sensor Type | SecuGen U20 optical fingerprint sensor | Image Resolution | 500 dpi | Size | Image: 300 x 400 pixels Platen: 0.72 x 0.9" / 18.2 x 22.9 mm | Effective Sensing Area | 0.6 x 0.8" / 15.24 x 20.32 mm | Speed | Smart Capture Speed: 0.2 to 0.5 sec | Standards | FIPS 201 (PIV-071006), INCITS 378, ISO/IEC 19794-2, ISO/IEC 19794-4, Mobile ID FAP 20 | | Type | Identiv CLOUD 2100R contact reader | Standards | ISO/IEC 7816, EMV, and PC/SC | Protocols | T=0, T=1 CCID compliant | Supported Cards | Class A, Class B, Class C | Interface Speed | 12 Mb/s | Clock Frequency | 4.8 MHz max | Max Baud Rate | 600 kb/s at FI/DI-97 | Other Features | Status LED Supports remote wake-up for card insertion/removal Short-circuit protection on smart card section | Certifications | FCC Class B, CE, EMV 2008 Level 1, WHQL, UL 60950, USB IF, UL92, GSA, ANZ, RoHS, ICES-003 Issue 4, VCCI | | USB Interface | USB 2.0 | Supported Operating Systems | Windows 10, 8.1, 8, 7, Server 2012, 2008 R2 Linux Android 3.1 and above | Supply Voltage | 5 VDC | Maximum Current | 220 mA | Operating Temperature | 32 to 131°F / 0 to 55°C | Operating Humidity | <90% RH, non-condensing | Certifications | FCC, RoHS, FBI PIV, FIPS 201 | Dimensions | 3.15 x 3.9 x 1.8" / 80 x 100 x 45.5 mm | Weight | 6.6 oz / 186 g |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 75 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
looking for a user manual for Quickbooks Premier Nonprofit 2020 for a Disabled American Veterans office.... Bower SFD9260.... 4-IN-1 WIRELESS CHARGER
... Brand :Gemini,model # XGA 4000,AND IT WAS PURCHASED NEW IN 2022,OR POSSIBLY EARLY 2023.WORKED perfect till one day I hit power switch and blew fuse x2... ZZSTAR binoculars...
|
Discussion |
Latest contributions to the discussion:
v18 Name: Craig Mcinturff Davis & Sanford Provista 7518B Tripod I am looking for a camera mounting plate for a v18 fluid head Davis & Sandford ... Impact SF-ABRL160 Flash stopped working Name: Sarah sananes Impact SF-ABRL160 Stand Mount Flash with Hello, our flash is connected to a canon camera and all of the sudden the flash is no longer working.
Does the flash have a certain battery life? ... REPEAT REQUEST AS YOU DID NOT ANSWER YOU JUST SENT ME MY MESSAGE BACK -PLEASE HELP Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi again-- all this did was send this email back to me with a link that brought me right back here... what is this?? also a link to search for manuals-- ive been there done that there is NO Manual to be found that answers my ? Please HELP thanks!!
Hi there is an extra small sc... Tripod heads DO NOT sit flush on the plate of the tripod Help Please Name: Tish Hopkins Benro TAD37C Series 3 Adventure Carbon Hi there is an extra small screw on the plate that the tripod head screws on that prevents my gimbal tripod head from sitting flush when it is screwed on. this is very annoying and does not allow my camera to stay steady when shooting. Please tell me how to resolve this issue. th... battery replacement Name: Danette L Boyd-Perez Doxie Go SE Portable Scanner Hello-- I have been working w/ support- it seems they sent incorrect battery replacement.
I confirmed DX-255 and was sent battery NP 120. There is no way that battery fits inside the panel of the DX-255. Please advise next steps thank you....
|
|