User manual
Sennheiser MD 421-II Microphone with Cloudlifter

User Manual for Sennheiser MD 421-II Microphone with Cloudlifter CL-1, Microphone Stand, and Cable Kit

• Product category: Instrument Microphones Sennheiser
• Brand: Sennheiser
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Sennheiser Instrument Microphones

Product description

• Sennheiser MD 421-II Microphone
  • Mic Shootout 3: Dynamic Microphones
  The Sennheiser MD 421-II Microphone is a cardioid, dynamic microphone popularized by the recording and broadcast industry. The MD 421-II is favored for its ability to handle a variety of applications due to its flexible bass control. The microphone features a 5-position bass roll-off switch and frequency response of 30 to 17,000 Hz. The cardioid polar pattern effectively rejects off-axis noise due to room acoustics and noise, and also provides effective feedback rejection often caused by monitors positioned within close proximity. The MD 421-II features a dynamic capsule, allowing even signal response whether close-up or at a reasonable distance. This is particularly useful for broadcast applications, where announcers and DJs can refrain from remaining absolutely stationary. The MD 421-II also handles very high sound pressure levels, making it suitable for miking instruments high in transient (peak) response.
  Dynamic Capsule
  • The MD 421-II features a dynamic capsule, resulting in even signal response in close and reasonable distances as well as the capacity to handle high SPL levels.
  Cardioid Polar Pattern
  • The cardioid polar pattern is effective in attenuating off-axis noise and ambiance. The cardioid polar pattern is also effective in rejecting feedback due to monitors.
  5-Position Bass Roll-Off
  • The 5-position low frequency roll-off switch offers flexible bass attenuation allowing the microphone to be used in a variety of situations.
  UPC: 615104009844
• Cloud Microphones Cloudlifter CL-1 Mic Activator
  • Mic Shootout 3: Dynamic Microphones
  The Cloudlifter CL-1 Mic Activator from Cloud Microphones is a compact, single-input solution for common audio problems in the field and in the studio involving low-output passive microphones, including ribbons. The CL-1 uses any standard phantom-powered mixer or microphone input device to provide up to +25 dB of clean, transparent gain. This improves signal-to-noise ratio and improves the performance of passive microphone signals by driving stronger, cleaner signals over longer XLR cable runs, making them ideal for broadcast, live, and studio applications. The CL-1 is housed in a rugged steel enclosure which offers shielding and durability. Additionally, the CL-1 has provisions for stage or stand mounting.
  Transparent Gain
  • Gives passive mics up to +25 dB additional active output and keeps the direct audio path free-and- clear of transformers, capacitors, and resistors. The CL-1 houses discrete JFET circuitry that delivers clean gain while preserving the natural sonic characteristics of the source
  Useful for a Variety of Applications
  • • Use with noisy or low-gain preamps
    • Use with mixers/preamps that negatively impact the sound at higher gain setting
    • Use with low-output dynamic microphones and ribbons
    • Mic softer sound sources such as acoustic instruments and voice
    • Use for long cable runs
  Features at a Glance
  • • Gives passive mics up to +25 dB additional active output
    • Provides 2 distinct stages of clean gain
    • Easy to use self-contained design requires only phantom power
    • Recommended for use with all passive dynamic microphones
    • Compatible with tube, battery, or power supply driven microphones
    • Safe for all passive ribbons with no transfer of phantom
    • Utilizes Patent Pending Class A, Discrete JFET circuitry
    • Ideal impedance loading for optimal performance @ 3 kOhms
    • Rugged, road ready, and portable, for studio, stage, and broadcasting
  UPC: 094922059796
• Auray MS-5230T Tripod Microphone Stand with Telescoping Boom
  • Mic Shootout 3: Dynamic Microphones
  The Auray MS-5230T Tripod Microphone Stand with Telescoping Boom features durable, steel construction. The telescoping boom arm is adjustable from 19.3 to 33.9" in length, allowing you to angle and extend the mic placement however you need it. An ergonomic twist-action clutch helps adjust the height of the stand, while the reinforced tripod base and non-slip feet keep it firmly and sturdily in place. The Auray MS-5230T mic stand collapses for easy transport. UPC: 847628015593
• 2 x Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 15' (4.6 m), Black
  • Mic Shootout 3: Dynamic Microphones
  The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (15') is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders; or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well-suited for critical recording and broadcast situations.
  
  Studio Elite 4000 Series cables are made from 24 AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. A 98% braided outer shield makes the cable resistant to EMI and RFI noise. The Neutrix XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.
  • 98% braided shield offers protection from EMI and RFI noise.
  • Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable's signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable's core.
  • 24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.
  • Cotton yarn reduces electrostatic and microphonic noise.
  • All solder points shrink-wrapped for protection.
  • Neutrik XX silver connectors offer high conductivity.
  • Cast zinc shell and chuck style strain relief.
  UPC: 847628551183

• MD 421-II Microphone rbxetyryvqqcqearcxw
• Lock-On Microphone Stand Adapter
• Foam Lined Vinyl Snap Case
• 1 Year Warranty

• Cloud Microphones - Cloudlifter CL-1 Mic Activator

• Auray - MS-5230T Tripod Microphone Stand with Telescoping Boom

• 2 x Kopul - Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 15' (4.6 m), Black

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Sennheiser MD 421-II Microphone

  Transducer	(Pressure Gradient) Dynamic
  Polar Pattern	Cardioid
  Frequency Response	30 Hz - 17 kHz
  Power Requirements	None Dynamic, Requires No Phantom or Battery Power
  Output Impedance	200 Ohms
  Output Connectors	XLR-3M Type
  Dimensions	8.38 x 1.88 x 2.00" (215 x 49.0 x 46.0 mm) LxWxH
  Weight	14 oz (385 g)

  Box Dimensions (LxWxH)	14.0 x 5.5 x 2.6"

• Cloud Microphones Cloudlifter CL-1 Mic Activator

  I/O	1x XLR input 1x XLR output
  Input Impedance	3 kOhms
  Gain	+25 dB

  Box Dimensions (LxWxH)	6.75 x 4.35 x 2.35"

• Auray MS-5230T Tripod Microphone Stand with Telescoping Boom

  Height	36.2 to 63" / 91.9 to 160 cm
  Base Type	Tripod
  Base Dimensions	25.6 x 25.6" / 65 x 65 cm

  Length	19.3 to 33.9" / 49 to 86 cm

  Material	Steel
  Weight	4.6 lb / 2.1 kg

  Box Dimensions (LxWxH)	33.5 x 4.0 x 4.0"

• 2 x Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable - 15' (4.6 m), Black

  Connector 1	3-Pin XLR Male
  Connector 2	3-Pin XLR Female
  Cable Length	15' / 4.6 m
  Shielding	98% Braid
  Wire Gauge	24 AWG
  Contact Plating	Silver

  Box Dimensions (LxWxH)	11.0 x 8.7 x 1.0"

Rating

Discussion