Imager | 1/3" interline SXGA CCD (ICX692AQA) |
Active Area | 1280 (H) x 720 (V) |
Chip Size | 6.04 (H) x 4.0 (V) mm |
Cell Size | 4.08 (H) x 4.08 (V) µm |
Minimum Illumination | 4 lux at F1.2 at 50% IRE, AGC ON and 1/60 sec shutter speed with IR cut filter |
Resolution | 600 TVL |
Sync System | Internal |
Video Output | DVI 1.0 conformity RGB, 1280 (H) x 720 (V),59.94 Hz / 60 Hz / 50 Hz / 29.97 Hz / 30 Hz / 25 Hz |
Light Compensation | Can be configured via the UART communication with auto electronic shutter and AGC |
Shutter Speed | Adjustable shutter speed via the UART communication Up to 1/100,000 sec at 60 Hz / 59.94 Hz or up to 1/83,947 sec at 50 Hz |
Gain | AGC or fixed gain selectable via the UART communication Gain Range: 0 to 18.3 dB |
Digital Gain Control | Up to 5.9866 dB |
Gamma | 1.0, 0.9, 0.8, 0.7, 0.6, 0.5, 0.45, 0.3 or manual gamma Selectable gamma via the UART communication |
White Balance | Auto white balance / manual white balance / push to set white balance Selectable white balance via the UART communication |
Mirror Image | Normal image and horizontal flip are selectable mirror image via the UART |
Presets | 28 DSP presets selectable picture mode via the UART communication |
Generators | Line Generator: Both horizontal and vertical with all available colors, adjustable thickness via the UART communication Shadow Mask Generator: Both horizontal and vertical with shading level adjustment via the UART communication Character Generator: Built-in character generation function via the UART communication |
Communication | 3.3 V UART communication via 3.5 mm stereo jack |
Pixel Blemish Collection | Up to 64 pixel blemish static collection |
Power | 9 to 15 VDC (Typical: 12 VDC) |
Power Input | 12 VDC power jack |
Power Consumption | Less than 2.8 W |
Optical Filter | IR cut filter |
Lens Mount | CS |
Video Output | DVI Output: HDMI connector |
External Control | 3.5 mm stereo jack with SW board |
Button | Primary SW Initial press button function: push to set white balance Initial Hold Button Function: Auto white balance (Function is selectable via the UART communication) |
Vibration | 20 to 200 to 20 Hz (5 min/cycle), acceleration: 10 G, 30 min, XYZ each directions |
Shock | Acceleration: 38 G, half amplitude 6 ms, 3 times XYZ each directions |
Standard Compliance | EMS: EN61000-6-2, EMI: 55011 |
Operating Temperature | 32 to 104°F (0 to 40°C) |
Storage Temperature | -22 to 149°F (-30 to 65°C) |
Dimensions (W x H x D) | 1.6 x 1.6 x 1.8" (4.0 x 4.0 x 4.6 cm) |
Weight | 4.2 oz (120.0 g) |