|
User Manual for Sevenoak Pro 2 Camera Stabilizer Click to enlarge the picture
Contents of the user manual for the Sevenoak Pro 2 Camera Stabilizer
- Product category: Stabilizer Systems Sevenoak
- Brand: Sevenoak
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Sevenoak Stabilizer Systems
 |
User manual for the Sevenoak Pro 2 Camera Stabilizer contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Sevenoak product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Sevenoak user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Sevenoak product will considerably shorten its lifespan!
|
Product description The Sevenoak Pro 2 Camera Stabilizer lets you capture smooth, free-floating handheld shots with camcorders and camera rigs weighing up to 6.6 pounds. The system employs a height-adjustable gimbal with a two-stage center column which collapses to a travel-ready size for convenient transport. The center column also makes it easy to balance heavier loads without increasing the weight of the stabilizer, letting you shoot for longer periods of time with less arm fatigue. Four counterweights are included, which fit onto two posts at the base of the stabilizer.
A sliding baseplate easily slides into the camera platform and allows for front-to-back balance adjustment. The platform itself also provides side-to-side adjustments for quick balancing. Once balanced the stabilizer isolates the camera from your body movements, letting you walk or even climb stairs while capturing smooth, elegant-looking footage. - Load Capacity
- Rated to support a payload of up to 6.6 pounds, this stabilizer is well suited for DSLRs, mirrorless, and small camcorders.
- Adjustable Gimbal
- The height-adjustable gimbal can be positioned along the center column. This helps you balance heavier loads by moving the gimbal higher up on the column, reducing the amount of counterweight you need. Fewer counterweights means less stress on your arm, which results in longer shooting times before fatigue sets in.
- Can be used for high- and low-angle shooting
- Three-Stage Center Column
- Before adding more counterweights to the stabilizer, you can extend the center column to help balance your camcorder. The stabilizer has a maximum extended height of 28.5" and a minimum height of 17.72".
- Textured Rubber Grip
- The stabilizer features a foam rubber grip on the handle for comfort and to aid against slippage. There is also a foam grip on the center column twist-locks for easier tightening and loosening.
- Four Included Counterweights
- The four included counterweights fit onto the two counterweight posts, allowing you to add them one at a time to adjust the unit's center of gravity.
In the Box Sevenoak Pro 2 Camera Stabilizer 1/4"-20 Tie-Down 4 x Counterweight Sliding Baseplate Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Sevenoak Pro 2 Camera Stabilizer in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersSevenoak SK-SW PRO 2 Specs | Material of Construction | Aluminum and carbon fiber | | Maximum Load | 6.61 lb / 3 kg | | Stages / Sections | 2 / 3 | | Length | Max: 28.54" / 72.5 cm
Min: 17.72" / 45 cm | | Weight | Stabilizer: 4.41 lb / 2 kg | | | | Package Weight | 5.7 lb | | Box Dimensions (LxWxH) | 19.2 x 9.1 x 5.0" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 35 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Jumpdrive C20i...
Pacsafe Travel Safe 200...
Narink Pro Food chopper B871 users manual...
manual for: "Battery Charger CG-580"...
Dawnstar Electric Knife Sharpener Model: S858-2 user ...
|
|
