User Manual for Shinybow SB-1110 2 x 1 x 8 VGA Switcher & Distribution Amplifier Click to enlarge the picture
Contents of the user manual for the Shinybow SB-1110 2 x 1 x
- Product category: Routers & Switchers Shinybow
- Brand: Shinybow
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Shinybow Routers & Switchers
|
User manual for the Shinybow SB-1110 2 x 1 x contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Shinybow product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Shinybow user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Shinybow product will considerably shorten its lifespan!
|
Product description The SB-1110 2 x 1 x 8 VGA Switcher & Distribution Amplifier from Shinybow is a 2-input to 8-output VGA switching unit with a maximum video bandwidth of 380 MHz.With 2 VGA inputs and 8 VGA distribution outputs, this VGA switcher and distribution amplifier enables you to route any input to any output and offer high-resolution VGA, SVGA, XGA, SXGA, UXGA, and WUXGA. It also eliminates the need to constantly move around the VGA input and output cables. This switcher and distribution amplifier is also suitable for full HD (High-Definition) LCD TV or Plasma display monitor applications. It is also designed to be wall mountable.The unit’s control is provided via the front selection pushbuttons with LED readout or via the IR remote controller. It can also be rack mounted using 19” rack ears (part number #1U-220L). Note: Make sure the computer or components are functioning properly before connecting them to the unit. Always connect the PC to the VGA distribution amplifier one at a time and make sure each works just as it did before it was connected. - Supports 2 inputs to 8 outputs VGA Switcher Distribution Amplifier
- Supports PC resolutions of VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024), UXGA (1600x1200), and WUXGA (1900x1200)
- Video bandwidth of 380 MHz (-3dB), 200 mVpp
- Good video (VGA-RGBHV) and stereo audio performance
- ESD rating which exceeds 4,000 V
- Switching RGBHV in LCD monitors and plasma displays
- Suitable for full HD high-resolution Video player device and LCD/Plasma monitor displays
- Features a direct selection and confirm via Front pushbuttons with LED readout
- Uses an IR remote control (frequency 38 kHz)
- RS 232 interface, via PC control driver is compatible with Windows 95/98/2000/XP Operating Systems
- Features a RS 232 protocol list with manual attached
- Lower power consumption with full load under 450 mA
- Power supply with a universal type 100 to 230VAC switch
In the Box Shinybow SB-1110 2 x 1 x 8 VGA Switcher & Distribution Amplifier AC Adapter (12VDC, 500 to 3,000mA) Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Shinybow SB-1110 2 x 1 x 8 VGA Switcher & Distribution Amplifier in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersShinybow SB-1110 Specs | Switcher | Type: 2 inputs to 8 outputs VGA switcher distribution amplifier | | Bandwidth | 380 MHz, (-3 dB) 200 mVpp, 310 MHz, (-3 dB) 2Vpp
R = 325 MHz, G = 325 MHz, B = 325 MHz, H = 110 MHz, V = 110 MHz | | Gain Flatness | 90 MHz, 0.1 dB | | Differential Gain Error | 0.01%, 0.1 dB | | Differential Phase Error | 0.02, 0.1 dB (RL = 150 Ω) | | Settling Time | 15 ns to 0.1% | | All Hostile Crosstalk | -84 dB @ 5 MHz, -54 dB @ 50 MHz
Channel Crosstalk: -56 dB @ 100 MHz | | Slew Rate | 1,000 V/us, G = +1.2 V Step | | Isolation | -100 dB @ 10MHz (high off) | | Output Current | 100 mA | | Controls | IR remote controller (38 kHz), front panel selection buttons with LED readout, and RS232 PC control | | Power | Low: 550 uA quiescent current (CMOS) | | Voltage Input | 12 VDC @ 1.25 A | | Safety Approvals | CE, FCC, RoHS (2002/95/EC) | | Dimensions (W x D x H) | 8.60 x 4.68 x 1.75" (218.44 x 118.87 x 44.45 mm) | | Weight | 1.87 lb (0.85 kg) | | | | Package Weight | 3.6 lb | | Box Dimensions (LxWxH) | 11.2 x 10.0 x 2.9" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 92 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
