User manual
Shure SM7B Broadcaster Package with CloudLifter

User Manual for Shure SM7B Broadcaster Package with CloudLifter CL-1 Kit

• Product category: Voice Over Microphones Others
• Brand: Others
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Others Voice Over Microphones

Product description

• Shure SM7B Vocal Microphone
  • Mic Shootout 3: Dynamic Microphones
  • Shure Mike's "Ultimate Chopper Drop Test
  The Shure SM7B Vocal Microphone is a dynamic microphone with a smooth, flat, wide-range frequency response appropriate for music and speech in all professional audio applications.
  
  It features a cardioid polar pattern, bass roll-off and midrange emphasis (presence boost) controls, and shielding against broadband interference. An internal air suspension shock isolation helps to eliminate mechanical noise transmission and a yoke mount facilitates mounting and provides precise control of the mic position.
  Flat, Wide-Range Frequency Response
  • The flat-frequency response enhances the midrange and high frequencies that are associated with the human voice.
  Rejection of Electromagnetic Hum
  • Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors.
  Air Suspension Shock Isolation
  • Internal air suspension shock isolation virtually eliminates mechanical noise transmission.
  Pop Filter
  • The built-in pop filter eliminates the need for any add-on protection against explosive breath sounds, even for close-up vocals or narration.
  Cardioid Polar Pattern
  • Cardioid polar pattern effectively isolates signal source improving gain before feedback.
  UPC: 042406088879
• Cloud Microphones Cloudlifter CL-1 Mic Activator
  • Mic Shootout 3: Dynamic Microphones
  • Shure Mike's "Ultimate Chopper Drop Test
  The Cloudlifter CL-1 Mic Activator from Cloud Microphones is a compact, single-input solution for common audio problems in the field and in the studio involving low-output passive microphones, including ribbons. The CL-1 uses any standard phantom-powered mixer or microphone input device to provide up to +25 dB of clean, transparent gain. This improves signal-to-noise ratio and improves the performance of passive microphone signals by driving stronger, cleaner signals over longer XLR cable runs, making them ideal for broadcast, live, and studio applications. The CL-1 is housed in a rugged steel enclosure which offers shielding and durability. Additionally, the CL-1 has provisions for stage or stand mounting.
  Transparent Gain
  • Gives passive mics up to +25 dB additional active output and keeps the direct audio path free-and- clear of transformers, capacitors, and resistors. The CL-1 houses discrete JFET circuitry that delivers clean gain while preserving the natural sonic characteristics of the source
  Useful for a Variety of Applications
  • • Use with noisy or low-gain preamps
    • Use with mixers/preamps that negatively impact the sound at higher gain setting
    • Use with low-output dynamic microphones and ribbons
    • Mic softer sound sources such as acoustic instruments and voice
    • Use for long cable runs
  Features at a Glance
  • • Gives passive mics up to +25 dB additional active output
    • Provides 2 distinct stages of clean gain
    • Easy to use self-contained design requires only phantom power
    • Recommended for use with all passive dynamic microphones
    • Compatible with tube, battery, or power supply driven microphones
    • Safe for all passive ribbons with no transfer of phantom
    • Utilizes Patent Pending Class A, Discrete JFET circuitry
    • Ideal impedance loading for optimal performance @ 3 kOhms
    • Rugged, road ready, and portable, for studio, stage, and broadcasting
  UPC: 094922059796
• Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
  • Mic Shootout 3: Dynamic Microphones
  • Shure Mike's "Ultimate Chopper Drop Test
  The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It's ideal for broadcast, voiceover, and podcasts.
  
  The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb. (2.27 kg). The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8"-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360°, the BAI-2X allows for precise microphone placement.
  
  The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp's slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.
  Versatile
  • Ideal for studios as well as home use
  Internal Springs
  • Internal springs provide smooth, noise-free positioning and clean and sleek profile
  Sturdy
  • Supports microphones up to 5 lb. (2.27 kg)
  Compatibility
  • The 5/8"-27 standard microphone thread is compatible with most shockmounts and microphone clips
  Precision
  • Extends up to 40" (101.6 cm) and rotates 360° allowing for precise microphone placement
  XLR Cable
  • The integrated 15-foot (457.2 cm) XLR cable provides a secure, locking connection and excellent signal transfer
  Extra Height
  • A 14" (13.6 cm) riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors
  Combo Mount
  • The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3-inch (5.8 cm) thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws
  14" Riser
  • The included riser adds 14" of height to the broadcast arm so that it can easily extend over computer or studio monitors
  UPC: 847628578272

• SM7B - Cardioid Dynamic Vocal Microphone vyqzyxqcryucur
• Swivel (Yoke Mount) Stand Adapter
• A7WS Shure Windscreen (SM7, SM7A, and SM7B)
• RPM602 Switch Cover Plate for SM7A and SM7B Broadcast Microphones
• Limited 2-Year Warranty

• Cloud Microphones - Cloudlifter CL-1 Mic Activator

• Auray - BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• Shure SM7B Vocal Microphone

  Sound Field	Mono
  Transducer	Dynamic
  Polar Pattern	Cardioid
  Frequency Range	50 Hz to 20 kHz
  Impedance	150 Ohms
  Sensitivity	-59 dBV/Pa at 1 kHz

  Output Connectors	1 x 3-Pin XLR
  Length	7.4" / 187.96 mm
  Diameter	2.5" / 63.50 mm
  Weight	1.69 lb / 767 g

  Box Dimensions (LxWxH)	13.5 x 7.0 x 5.0"

• Cloud Microphones Cloudlifter CL-1 Mic Activator

  I/O	1x XLR input 1x XLR output
  Input Impedance	3 kOhms
  Gain	+25 dB

  Box Dimensions (LxWxH)	6.75 x 4.35 x 2.35"

• Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable

  Length	40" (101.6 cm)
  Weight Capacity	5 lb (2.27 kg)
  Microphone Mount	5/8"-27 standard microphone thread
  Clamping Range	2.3" (5.8 cm)
  Riser	14" (35.56 cm)
  Cable	XLR M to XLR F: 15' (457.2 cm)
  Weight	4.47 lb. (2.02 kg)

  Box Dimensions (LxWxH)	23.5 x 7.4 x 3.5"

Rating

Discussion