User Manual for SKB iSeries 2918-14-BT Wheeled Waterproof Case Click to enlarge the picture
Contents of the user manual for the SKB iSeries 2918-14-BT Wheeled Waterproof Case
- Product category: Hard & Watertight Cases SKB
- Brand: SKB
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for SKB Hard & Watertight Cases
 |
User manual for the SKB iSeries 2918-14-BT Wheeled Waterproof Case contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any SKB product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official SKB user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a SKB product will considerably shorten its lifespan!
|
Product description Studio Storage Solutions Read More The black iSeries 2918-14-BT Wheeled Waterproof Case from SKB is molded from high-strength polypropylene copolymer resin, and features a gasketed, water and dustproof, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Featuring a molded-in hinge, a trigger release latch system, and an automatic ambient pressure equalization valve (MIL-STD-648C), your gear will be safe and secure inside while traveling to and from shoots, sets, and even foreign locations.
Carry your gear in the case by way of the comfortable, snap-down, rubber, overmolded cushion grip handles on each end of the case or the double-wide snap-down handle on the side. A built-in pull handle and four wide set in-line skate-style wheels make transport even easier especially if you're already carrying other equipment. Secure your gear even further by taking advantage of the padlock holes with stainless steel padlock protector clips. - Industrial strength injection-molded pull handle
- 4 wide set in-line skate-style wheels for easy transport
- TSA accepted key locking latches (sold separately)
- Padlock holes include stainless steel padlock protector clips
- Water and dustproof design (MIL-C-4150J)
- Molded-in hinge for added protection
- Trigger release latch system
- Snap-down, rubber, overmolded, cushion grip handle
- Polypropylene co-polymer used in injection molding
- Ambient pressure equalization valve (MIL-STD-648C)
- Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
- Resistant to impact damage (MIL-STD-810F)
UPC: 789270291843 In the Box SKB iSeries 2918-14-BT Wheeled Waterproof Case (Black, Empty) Limited Lifetime Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the SKB iSeries 2918-14-BT Wheeled Waterproof Case in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersSKB 3I-2918-14BTE Specs | Carry/Transport Options | Side Handle, Telescoping Handle, Top Handle, Wheels | | Closure Type | Latch | | Materials | Polypropylene | | Interior Contents | None | | Exterior Dimensions | 31.6 x 20.5 x 15.8" / 80.3 x 52.1 x 40.1 cm | | Interior Dimensions | 29 x 18 x 14" / 73.7 x 45.7 x 35.6 cm | | Base Depth | 11.5" / 29.21 cm | | Lid Depth | 2.5" / 6.35 cm | | Interior Cubic Volume | 4.23 ft³ / 0.12 m³ | | Watertight | Yes | | Maximum Buoyancy | 265.00 lb / 120.20 kg | | IP Rating | IP67 | | MIL Certification | MIL-STD-4150J, MIL-STD-648C, MIL-STD-810F, per Manufacturer | | Storage Temperature | -69 to 180°F / -56 to 82°C | | Weight | 24 lb / 10.9 kg | | | | Package Weight | 26.5 lb | | Box Dimensions (LxWxH) | 32.0 x 21.0 x 16.0" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 38 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
