|
User Manual for Slate Digital FG-X - Software Suite for Mastering in Pro Audio Click to enlarge the picture
Contents of the user manual for the Slate Digital FG-X - Software Suite
- Product category: Virtual Processor Plug-Ins Slate Digital
- Brand: Slate Digital
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Slate Digital Virtual Processor Plug-Ins
|
User manual for the Slate Digital FG-X - Software Suite contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Slate Digital product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Slate Digital user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Slate Digital product will considerably shorten its lifespan!
|
Product description - Mastering Tutorial with FG-X from Slate Digital
Available for download, the Slate Digital FG-X is a dynamics processor designed for the mastering process. It can be quite helpful in achieving quick reference-level masters to send to clients, or it can be used as a dynamics processor in a professional mastering context. The process is intended to achieve loud masters without compromising transient material, so that the mix doesn't feel overly squashed unless that is what you want.
The FG-X is comprised of a compressor, a leveler (analogous to a limiter), and a meter. The compressor is transparent, capable of taming the peaks in a mix without imparting character. Attack, release, ratio, and threshold controls are on hand, as is a prominent VU-style meter that displays input, output, or gain reduction.
As with most limiters, the leveler can be used to raise the apparent loudness of a song while largely protecting you from digital overs. What differentiates the leveler from many of its peers is the transient section, which allows you to retain transient heft and detail.
Of additional use are the Dynamic Perception knob and ITP slider. The knob can add a feeling of dynamism to a mix otherwise lacking in movement. The slider changes the saturation curve of the entire process. Raising the slider lends your transients a harder sound, while lowering the slider renders a more smooth sound. The former setting is more geared toward rock, while the latter is better suited for bass-heavy material.
Bar-graph meters are on display to show you the RMS of your mix, as well as peak values and any overs you might incur. An extra pair of VU meters also show RMS values for the left and right channel. You can change under-the-hood metering settings by clicking the Settings button. Compressor settings and leveler settings are also accessible via dedicated Settings buttons, allowing you to change the compressor's ratio and threshold ranges, apply dither, and change the output ceiling.
The FG-X is compatible with Mac and Windows platforms. It can operate in VST, AU, and AAX formats. Please note that it is not a true-peak limiter, and should not be pushed as such. An iLok 2 or 3 is required for operation, and is available separately. Note: An iLok 2 or 3 is required to run this software. The iLok is available separately. - Leveler Operations Explained
- The recommended order of operations with the FG-X's leveler goes as follows:Press the Constant Gain Monitoring button, which ensures that you will not hear any increase in loudness, no matter how much gain you apply. Next, apply gain until you hear obvious distortion, then back off a little. Now, play with the Lo Punch and Detail knobs until you hear the exact balance of low-end punch and midrange detail you'd like to preserve.Now, manipulate the Dynamic Perception knob until the mix feels as though it's neither overly squashed, nor undertreated. Manipulate the ITP slider in one direction or the other, keeping an ear on the low end and transients. Please note, it is also possible to automate any of these parameters throughout the mix, so if one section is bassier than another, you can automate the ITP slider to best suit that section.Finally, press the Constant Gain Monitoring button again, so the mix plays back at commercial levels.
Table of Contents
|
Upload User Manual
Have you got an user manual for the Slate Digital FG-X - Software Suite for Mastering in Pro Audio in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersSlate Digital FG-X Mastering Processor Specs | System Requirements (Mac) | Quad-Core i5 processor (Quad-Core i7 processor recommended)
4 GB RAM (8 GB RAM recommended)
OS X 10.7 or later (OS X 10.9 or later recommended)
iLok 2 or 3 | | System Requirements (Windows) | Quad-Core i5 processor (Quad-Core i7 processor recommended)
4 GB RAM (8 GB RAM recommended)
Windows 7 or later
iLok 2 or 3 | | Supported Plug-In Formats | VST2, VST3, AU, AAX (32-/64-bit) |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 62 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Xc2 Surerire...
pocket quadcopter RIV-YT320...
CYBERPOWERPC GMA6200BSTV2...
FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
...
Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
...
|
|
