User Manual for Solid State Logic Alpha Channel Rackmount Analog Channel Strip with Built-In ADC Click to enlarge the picture
Contents of the user manual for the Solid State Logic Alpha Channel Rackmount
- Product category: Channel Strips Solid State Logic
- Brand: Solid State Logic
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Solid State Logic Channel Strips
|
User manual for the Solid State Logic Alpha Channel Rackmount contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Solid State Logic product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Solid State Logic user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Solid State Logic product will considerably shorten its lifespan!
|
Product description The Solid State Logic Alpha Channel is a rackmount analog channel strip offering a single channel of microphone preamplification, equalization, dynamics processing, and analog-to-digital conversion for singers, producers, and engineers in homes, studios, and live stage applications. With up to 75 dB of gain and Variable Harmonic Drive, the Alpha Channel can deliver anything from clean and smooth tones for soft vocals to ragged and gritty distortion for pounding drums. Its XLR-1/4" combo jack accommodates mic-, line-, and instrument-level input signals.Eliminate problematic rumble and proximity effect via the 40/80/120 Hz high-pass filter. Tonal sculpting is easily achieved with the Alpha Channel's 3-band EQ—the LF band works in shelf or bell mode, the MF band has a variable Q control, and the HF band is a dedicated shelving curve. Connect your favorite outboard processor such as a compressor to the 1/4" insert jacks, position it before or after the EQ at the push of a button, and even mix the dry send signal with the return.Activate the intelligent auto limiter to avoid clipping through the integrated 24-bit / 192 kHz ADC, which sends digital signal to the S/PDIF output jack. A separate analog output is presented on a balanced 1/4" TRS socket. The Alpha Channel also features adjustable output gain, a -20 dB pad, a polarity switch, and selectable 48V phantom power. The Alpha Channel occupies 1 RU of rack space and includes a detachable power cable. - Transparent SSL mic preamp with 75 dB of gain and Hi-Z impedance switch
- Built-in VHD (Variable Harmonic Drive) circuit—first featured on SSL's flagship Duality console—adds level-dependent coloration from warm 2nd harmonics to aggressive 3rd harmonics
- High-pass filter selectable at 40/80/120 Hz
- 3-band EQ with mid-frequency Q control and selectable shelf/bell low-frequency mode
- Selectable intelligent auto limiting maximizes headroom and avoids ADC clipping
- Front-panel XLR-1/4" combo jack for mic, line, or instrument input
- Auto-sensing 1/4" Hi-Z input with passive DI-type impedance detection and level matching
- Integrated 24-bit / 192 kHz ADC (analog-to-digital converter)
- 1/4" TRS analog output and S/PDIF digital output
- Automatic sample rate synchronization to incoming digital signal
- 6-segment LED output meter
- 1/4" insert send and return can be positioned before or after the EQ
- Sum switch mixes the insert send with the insert return
- Dedicated switches for polarity, -20 dB pad, and phantom power
- Connect multiple Alpha Channels via DC sidechain link RCA jacks to achieve the same degree of limiting on the connected units
In the Box Solid State Logic Alpha Channel Rackmount Analog Channel Strip with Built-In ADC Power Cable Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Solid State Logic Alpha Channel Rackmount Analog Channel Strip with Built-In ADC in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersSolid State Logic XLogic Alpha Channel Specs | Number of Channels | 1 | | Inputs | 1 x XLR-1/4" combo (balanced/unbalanced)
1 x Coaxial S/PDIF | | Outputs | 1 x 1/4" TRS (balanced)
1 x Coaxial S/PDIF | | Inserts | 1 x 1/4" TRS send (balanced)
1 x 1/4" TRS return (balanced) | | Link Connectors | 1 x RCA coaxial link input
1 x RCA coaxial link output | | Input Impedance | XLR Lo-Z: 1 kOhm
XLR Hi-Z: 10 kOhms
1/4" Hi-Z: 1 MOhm
1/4" Insert Return: 10 kOhms
S/PDIF: 75 Ohms | | Output Impedance | 1/4" Output: 40 Ohms
1/4" Insert Send: 40 Ohms
S/PDIF: 75 Ohms | | Operating Level | Limiter Switch Out: 24 dBu, unity gain to output
Limiter Switch In: 12 dBu, +12 dB gain to output | | Maximum Output | +24.3 dBu | | Frequency Response | 10 Hz to 70 kHz (
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 45 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
CYBERPOWERPC GMA6200BSTV2...
FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
...
Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
...
Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f...
zzstar camera binoculars model DT16...
|
|
