User Manual for Telex BTR-1 - 1-to-1 UHF IUHF Full-Duplex, Digitally Encrypted Wireless Transceiver Click to enlarge the picture
Contents of the user manual for the Telex BTR-1 - 1-to-1 UHF IUHF
- Product category: Base Stations Telex
- Brand: Telex
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Telex Base Stations
|
User manual for the Telex BTR-1 - 1-to-1 UHF IUHF contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Telex product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Telex user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Telex product will considerably shorten its lifespan!
|
Product description The Telex BTR-1 1-to-1 UHF Full-Duplex, Digitally Encrypted Wireless Intercom Base Station Transceiver is a unique professional UHF wireless intercom base station system with a 1-to-1 (one base station to one belt pack) full-duplex, digitally encrypted design, for use in sports or commercial applications. The BTR-1 is equipped with UHF frequency agility, digital audio security encryption, the patented ClearScan channel search, three audio channel capability with 2-wire line mix, signal relay closure, and a base station RF meter. The bright, backlit LCD display of the BTR-1 offers an intuitive graphical user interface, and the unit offers the advanced technology of Intelligent Power Control, DSP Digital Audio Processing and proprietary digital audio encryption, providing clean sound and secure communications at a high professional level. - Wireless one-to-one UHF intercom Base Station with frequency agility, full-duplexing, digital security encryption, and huge selection of available frequencies organized in independent 18 MHz bands
- CAN Bus remote network connectivity
- Factory selected preset frequency groups, 1000' operating range, Transmit power level switch
- Six channels of 2-wire intercom access, relay contact closure for base station with remote beltpack activation feature
- Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically
- Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability
- Frequency change from base station or beltpacks
- Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment
- Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel
- Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors
- AC or DC operation in 12 to 15 Volt range
- Table top or rackmount placement with supplied rackmount kits
In the Box Telex BTR-1 - 1-to-1 UHF IUHF Full-Duplex, Digitally Encrypted Wireless Transceiver Operating Instructions In-Line Power Supply 2 x Antennas (one Transmit, one Receive) Gain Adjust Plastic Screwdriver Two Terminal Plug (for Relay) Large Phillips Pan Head Screw for Rackmounting Small Phillips Pan Head Screw for Rackmounting Single Unit Rackmount Bracket Dual Units (Side by Side) Middle Rackmount Bracket Rackmount Side Bracket Interconnect Cable (15 pin to 15 pin) Owner's Manual 3 Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Telex BTR-1 - 1-to-1 UHF IUHF Full-Duplex, Digitally Encrypted Wireless Transceiver in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersTelex BTR-1-B2 Specs | | | Frequency Range | 482 - 608 MHz in 18 MHz TX/RX Bands
614 - 746 MHz in 18 MHz TX/RX Bands | | Power Requirements | 12-15 Volts AC/DC @ 1 Amp | | Temperature Range | -20 to 55° C (-4 to 130° F) | | Antenna | TX: 1/2 wave (supplied), TNC male connector
RX: 1/2 wave (supplied), TNC male connector | | Frequency Response | 100Hz - 4.0kHz | | I/O | Four wire input: Level adjustment (2 Vrms typical)
Four wire output: Level adjustment (2 Vrms typical)Telex Intercom: I/O level adjustable (1 Vrms typical), line impedance 300 ohms
RTS Intercom: I/O level adjustable (0.775 Vrms typical), line impedance 200 ohmsClearCom Intercom: I/O level adjustable (1 Vrms typical), line impedance 200 ohms
Aux Input: Level adjustable (2 Vrms typical)Aux Output: Level adjustable (2 Vrms typical into 600 ohms) | | Sensitivity | Microphone input sensitivity: 10mV (200 ohms source) | | Local Headset Output | 200mW output into 150ohms (1% Distortion) | | Mute | Mute of Wire Income Port: 100dB (30kHz Low Pass Filtered) | | Dimensions (WxHxD) | 8.25 x 1.72 x 9.00" (20. 9 x 4.4 x 22.9cm) | | Weight | 3 lbs 8 oz (1.59 kg) | | | | Type | Synthesized Transmitter, 720 channels | | RF Power | 50mW typical (High), 5mW typical (Normal) | | Modulation Type | GMSK | | Deviation | Complies with FCC 74.861 | | Frequency Stability | 0.005% | | Spurious & Harmonics | Exceeds FCC specifications | | | | Type | Dual conversion superheterodyne, 720 channels each | | Sensitivity | <0.8 uV for 12dB SINAD | | IF Bandwidth | 3dB at 230 kHz | | Image Rejection | >70dB or better | | Controls and Indicators | Front Panel:
1 x Power Switch
2 x Menu and Set Buttons
2 x Up and Down Buttons
1 x Contrast Adjust Trim
1 x Talk Button
1 x Talk Light
1 x Microphone Gain Trim
1 x Auxiliary Peak Level LED
1 x Peak Intercom Level In/Out LED
1 x Headset Volume Control
1 x Backlit LCD Display | | Connectors | Front Panel:
1 x 4-pin Male XLR Telex Headset Connector*
Rear Panel:
2 x Female Color-Coded TNC Transmit/Receive Connectors
4 x Male/Female 3-pin XLR 2-Wire Intercom Connectors
2 x 15-pin D-Sub Loop Thru
1 x RJ-11 4-Wire Intercom Port
1 x RJ-11 Auxiliary Audio Connector
2 x RJ-45 Remote CAN Bus Connectors
1 x Phoenix Plug Relay Connector1 x IEC Power Receptacle
*Also available as 4-pin Female XLR for RTS Headsets | | Frequency Stability | 0.005% | | Distortion | < 1% at peak level | | Signal-to-Noise Ratio | 80dB (30kHz Low Pass Filtered) | | Antenna | 2 x 1/2 Wave, TNC Connector | | | | Package Weight | 6.05 lb | | Box Dimensions (LxWxH) | 15.4 x 11.6 x 3.9" |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 86 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
