User Manual for Tote Vision CV-500 HDMI to 3G HD SD-SDI Converter Click to enlarge the picture
Contents of the user manual for the Tote Vision CV-500 HDMI to 3G
- Product category: Signal Converters Tote Vision
- Brand: Tote Vision
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Tote Vision Signal Converters
|
User manual for the Tote Vision CV-500 HDMI to 3G contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Tote Vision product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Tote Vision user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Tote Vision product will considerably shorten its lifespan!
|
Product description The Tote Vision CV-500 HDMI to 3G/HD/SD-SDI Converter allows a single HDMI input to be converted to two duplicate SDI output signals. It features two HDMI inputs and two 3G/HD/SD-SDI outputs, with only one of the inputs active at time. When it is powered on, the source connected first will be transmitted, and if both sources are connected before powering it on, only source A will be transmitted. Because both SDI outputs are active, you can output your converted signal to two SDI devices simultaneously. The converter passes up to 8 channels of embedded HDMI audio and supports 16-, 20-, and 24-bit formats at 48 kHz in synchronous mode for SD and synchronous or asynchronous mode for HD-SDI and 3G-SDI signals. A 12V DC power supply comes included. - Converts HDMI signal to 3G/HD/SD-SDI output signals
- Supports SMPTE425M Level A, SMPTE424M, SMPTE292M, and SMPTE259M-C standards
- Integrated audio embedder for up to 8 channels of 48 kHz audio
UPC: 081651481516 In the Box Tote Vision CV-500 HDMI to 3G/HD/SD-SDI Converter 12V DC Power Supply Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Tote Vision CV-500 HDMI to 3G HD SD-SDI Converter in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersTote Vision CV-500 Specs | Input | 2 x HDMI inputs (one input active at a time) | | Output | 2 x 3G/HD/SD-SDI (BNC) outputs | | Output Standard | SMPTE424M, SMPTE293M, SMPTE259-C at 2.970 Gb/s, 2.970 1.001 Gb/s, 1.485 Gb/s, 1.485/1.001 Gb/s, and 270 Mb/s | | Supported Formats | 3G: 1080p 50/59.94/60 Hz
HD: 1080p 24/30 Hz, 1080i 50/59.94/60 Hz, 1035i 50/59.94/60 Hz, 720p 50/59.94/60 Hz
SD: NTSC 59.94 Hz, PAL 50 Hz | | Power | 12 VDC | | Dimensions | 6.6 x 3.4 x 0.9" (167.6 X 85.4 X 24.2 mm) | | Weight | 14.1 oz (400 g) |
Rating50% users recommend this product to others. And what about you?
This product has already been rated by 60 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
