|
User Manual for Two Notes Le Lead Two-Channel Tube-Driven Preamp Pedal Click to enlarge the picture
Contents of the user manual for the Two Notes Le Lead Two-Channel Tube-Driven
- Product category: Effects Pedals Two Notes
- Brand: Two Notes
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Two Notes Effects Pedals
|
User manual for the Two Notes Le Lead Two-Channel Tube-Driven contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Two Notes product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Two Notes user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Two Notes product will considerably shorten its lifespan!
|
Product description Designed for electric guitarists who want to vitalize their amplified setup (or eschew their amps altogether), the Two Notes Le Lead is a two-channel preamp in pedal form factor. Part of the Le Preamp series, this pedal features a Ruby 12AX7AC5 HG tube at its heart, giving you an analog, tube-driven sound quite suitable for numerous clean and distorted scenarios.Routing possibilities of all kinds were considered in the construction of this pedal. An unbalanced input and output have been designed for guitar signals, while an XLR DI output gives you a balanced run to PA systems, mixers, and recording interfaces. You’ll also note the thru-put for passing unprocessed signal straight to an amplifier as well as a headphone output and 5-pin DIN MIDI jacks.MIDI I/O allows you to send and receive MIDI PCs, so you can control third-party effect units straight from the pedal or use your MIDI foot controller to select among channel configurations on the Le Lead. Rounding out the connections is a built-in, post-EQ effects loop for integrating other effects pedals. With all these possibilities, you can drive your amplifier into high-gain territories, or ditch the amp altogether, plugging straight from the pedal into the house.The Le Lead offers two channels—one designed to give you a clean, yet slightly crunchy sound, and the other offering the timbre of a modern high-gain amplifier. In addition to its post-distortion EQ, the second channel also gives you a midrange knob with a selectable center frequency for further tone sculpting. You can use these channels independently, or blend them together in one of two fusion modes. Hot Fusion mode in particular provides the gain, sustain, and tonal capabilities necessary to achieve anything from metal to fuzz tones. With this pedal, you’ll be able to slip into genres as disparate as adult contemporary, power pop, jazz-fusion, grunge, sludge metal, hair metal, djent, and more.Other features worth mentioning are its hardwire bypass, its ground/lift switch for the DI output and a selectable speaker simulation taken right from Two Note’s Torpedo C.A.B. This emulation processes the sound of your DI and headphone output through a cabinet model specifically tuned to complement the Le Lead preamp. The emulation is switchable via a button on the side of the pedal next to the headphones jack. Power is supplied via the included adapter. A 16-cabinet license for Wall of Sound III is included with the pedal. - Two Channel or Fusion Operation
- Le Lead’s A and B channels can operate independently with each channel providing its own voicing and EQ section. Channel A gives you passive bass and treble controls, while channel B adds a midrange knob with a sweepable center frequency to the mix. On Channel A, you’ll notice a lower gain tube stage with pre-gain EQ. Channel B, on the other hand, offers higher gains and a post-distortion EQ.Then you have your fusion modes. Cold Fusion is not the hypothetical room-temperature nuclear reaction depicted in so many works of science fiction, but rather the placement of channels A and B in parallel. In Cold Fusion, you can blend the cleaner sound from A, with the more distorted sound of B to achieve both crunch and articulation. In Hot Fusion, A feeds B, so channel A can be used as a boost for channel B, with both A and B's EQs on hand to shape the result.
- Switching, MIDI, and Multi-Channel Mode
- Each channel gets its own footswitch, but simultaneously pressing A and B will activate Fusion mode. When routed into a MIDI setup, pressing A, B or A and B will also send a specific MIDI Program Change command. 5 basic functions can be accessed through MIDI Program Changes (PC) sent by an external MIDI device: Canal A, Canal B, Cold Fusion, Hot Fusion, and Bypass.In other words, the pedal can receive a MIDI PC asking for bypass or channel switch, and any MIDI message received will be transmitted to the MIDI output (MIDI Thru function). When using the pedal as a MIDI controller, you can send a MIDI PC to trigger the preset-changes on another MIDI device, such as a Torpedo C.A.B. or a third-party effects unit. All of this allows for seamless integration into MIDI pedalboard switching systems.Connected via MIDI, two or more Two Notes units can be configured in multichannel mode. Pressing A on a Le Lead will bypass your Le Crunch, turning all Le Preamp-series pedals into, effectively, different channels of an amplifier.
- Connection Routing Possibilities
- As a traditional preamplifier, the Le Lead can be connected to a power amplifier and a cabinet, or into the return or power-amp input of a guitar amplifier. Placed before an amp, it can act as a boost, overdrive, or distortion pedal. Used alone or with the Torpedo C.A.B., the pedal can act as an autonomous system, enabling you to connect directly to the house's PA, a mixing board, or a recording interface. By simply plugging your headphones, you can play silently.
- Integrated Speaker Simulation
- Should you use the DI output or the headphones output, your tone will be processed through an analog speaker simulation tuned to work specifically with the Le Lead preamp pedal. This simulation is based on sounds created with Two Notes' Torpedo simulator.
- Included 16-Cabinet License for Wall of Sound III
- Included with the pedal is a license for 16 virtual cabinets for use with Wall of Sound III, a speaker and microphone-placement emulation plugin. This plugin works in DAWs such as Cubase, Logic Pro X, Pro Tools, and more. Using this software, you can recreate the full complement of a guitar sound, from the preamp of the pedal to the 16 cabinet responses usable in Wall of Sound III.
UPC: 370067380156 In the Box Two Notes Le Lead Two-Channel Tube-Driven Preamp Pedal Power Adapter License for 16 Cab Simulations in Wall of Sound III Limited 2-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Two Notes Le Lead Two-Channel Tube-Driven Preamp Pedal in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersTwo Notes LELEAD Specs Tube | Ruby 12AX7AC5 HG | Controls | Channel A: Input Gain knob Volume knob Bass knob Treble knob Bypass/Engage footswitch Fusion Controls: Fusion Mode Selector button Fusion Level knob Channel B: Input Gain knob Volume knob Bass knob Treble knob Mid knob Sweep knob Bypass/Engage footswitch | Midrange | Gain Range on Channel B's Midrange Gain Control: -18 to +6 dB Center Frequency Range on Channel B's Midrange Sweep Control: 300 Hz to 1.5 kHz | I/O | 1 x 1/4" instrument input 1 x 1/4" return input 1 x 5-pin DIN MIDI input 1 x 1/4" send output 1 x 1/4" thru output 1 x 1/4" instrument output 1 x 1/4" stereo TRS headphone output 1 x XLR DI output 1 x 5-pin DIN MIDI output 1 x 2.1mm DC Jack | Input Impedance | Input: 1 MOhm Return: 2.2 MOhms | Output Impedance | Send: 300 Ohms Instrument Output: 300 Ohms DI Output: 600 Ohms | Maximum Input Level | Return: 17 dBu | Maximum Output Level | Send: 11 dBu Instrument Output: 11 dBu DI Output: 10 dBu | Input Voltage | 12 VDC | Power Consumption | Approximately 6 W | Current Draw | 500 mA | Dimensions | 4.9 x 7.4 x 2.0" / 124 x 189 x 50 mm | Weight | 1.7 lb / 750 g |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 28 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop... LG 300W 2.1 ch surround sound manual. It has the soundbar, subwoofer, wireless receiver for connected rear speakers and wireless controller. ...
|
Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|