|
User Manual for UTP Balun VBP36DC-04HA 4-Channel Passive Video Balun with Power Server Click to enlarge the picture
Contents of the user manual for the UTP Balun VBP36DC-04HA 4-Channel Passive Video
- Product category: Signal Extenders UTP Balun
- Brand: UTP Balun
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for UTP Balun Signal Extenders
|
User manual for the UTP Balun VBP36DC-04HA 4-Channel Passive Video contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any UTP Balun product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official UTP Balun user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a UTP Balun product will considerably shorten its lifespan!
|
Product description The UTP Balun VBP36DC-04HA 4-Channel Passive Video Balun with Power Server is a power hub capable of transmitting up to 4 channels of baseband video signals and providing 12VDC power to all 4 channels simultaneously via UTP cables. This balun is used with the VBP2412DC Passive Video Balun & Power Step Down 12V DC Receiver (sold separately). - Uses UTP cables to transmit video signals and provide power to camera simultaneously
- Transmission distance up to 1,000' (300m)
- Supports all baseband signal formats including PAL, NTSC, and SECAM
- Universal power input support 100 to 240VAC
- Regulated 36VDC output power
- Uses three pairs of UTP cabling to carry more current
- Consistent with EIA/TIA568B and EIA/TIA568A standards
- Features an over current recover IC for true isolation of each channel
- Protects from connector reverse polarity and short circuits
- Built-in lightning surge protection and interference rejection
- Low-noise exhaust fan for greater stability
- Provides spare internal installation modules
- Main power switch indicator with over current LED
UPC: 577020360044 In the Box UTP Balun VBP36DC-04HA 4-Channel Passive Video Balun with Power Server AC Power Cable 2 x Rack-Mount Bracket Spare Fuse Limited 1-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the UTP Balun VBP36DC-04HA 4-Channel Passive Video Balun with Power Server in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersUTP Balun VBP36DC-04HA Specs | Input Voltage | 110 to 250 VAC (50/60 Hz) | Power Consumption | 100 W maximum | Current | Current Conversion Efficiency: >75% | Output Voltage | 36 VDC, 2.8 A | Output Current | 1,000' (300 m) at 1096 mA | Number of Channels | Supplied: 4 | | Video Signals | All baseband signals supported including PAL, NTSC, and SECAM | Band | Balance Band: 0 to 6 MHz (-3 dB) | Maximum Transmission Distance | Color: 1,000' (300 m) | Cable | Transmitting Cable: UTP CAT5e | Interference Rejection | >60 dB | Number of Channels | Receiving: 4 | Fan Noise | Electric: 40 to 60 dBA | | Video Connector | 4 x female BNC Resistance: 75 Ω Standard: IEC61000-4-5 | Power Connector | 1 x AC input plug (black) | UTP | Video and Power Transmission: 4 x RJ45 Jack with indicator light (white) | | Lightning Protection | 2 kV, Standard: IEC61000-4-5 | Electrical | Static Electricity Protection: 1a contact discharge level 3 1b air discharge level 3 Standard: IEC61000-4-2 | Fuse | Main Fuse: 250 V, 4 A | | LED Indicators | Power: Green Over Current Protection: Yellow Main Switch On/Off: Red | Stability | MTBF: >10,000 hours | | Operating Temperature | 32 to 131°F (0 to 55°C) | Storage Temperature | -4 to 176°F (-20 to 80°C) | Relative Humidity | 0 to 95% (non-condensation) | | Dimensions (L x W x H) | 11.02 x 7.09 x 2.63" (280.00 x 180.00 x 66.80 mm) | Weight | 3.80 lb (1.72 kg) | | Package Weight | 6.2 lb | Box Dimensions (LxWxH) | 15.0 x 10.2 x 4.2" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 91 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Honeywell Home Doorbell 916.8 MHz Product Ref: 3231665-002 Rev B... Go Pro FETCH Dog Harness ADOGM-001... Trijacon ACOG USMC scope... Pyle Pro BTA 62BT 6-Zone Stereo Receiver Bluetooth... LG Gram 17 Laptop...
|
Discussion |
Latest contributions to the discussion:
lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland
... lithium ion battery pack EN-EL5 3.7 V 1100mAh Name: Jane Holland Nikon EN-EL5 Lithium-Ion Battery HI:
How can I tell if this (old) battery is still good? I cannot charge it on my old Nikon COOLPIX P500 camera.
Thank You
Jane Holland... Settings access and setup Name: Edwin Derks Nuance PaperPort 14 I had a problem with Paperport loading. Through the remote efforts of a Tech was able to get back online, however, "settings" are only listed 1 - 5 with no action listed as was 'visibly' available, (i.e. Scan both sides, Black and White, Color, etc.)
1. how to change, 2. wha... query Name: Vudayagiri Balasubramanyam Bose Wave SoundTouch Music System IV how to set up my bose radio with my remote working-class ... Hi. I didn’t even get a chance to try it once! :( plz help Name: Eric Tasakovic Keeley Dark Side Pedal I ordered a dark side pedal second hand online for 20 bucks cheaper than it would have been to buy it new….20 measly bucks. Anyway…it didn’t come with a power supply. I messed up and accidentally plugged in a 9v ac output power supply in, instead of the required 9v dc. I’...
|
|