User Manual for Vello Accessory Kit for Fujifilm X-T1 Mirrorless Digital Camera Click to enlarge the picture
Contents of the user manual for the Vello Accessory Kit for Fujifilm X-T1
- Product category: Accessory Kits Vello
- Brand: Vello
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Vello Accessory Kits
|
User manual for the Vello Accessory Kit for Fujifilm X-T1 contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Vello product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Vello user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Vello product will considerably shorten its lifespan!
|
Product description This Vello Accessory Kit for the Fujifilm X-T1 Mirrorless Digital Camera from is intended to enhance your use of that camera model while helping to ensure that its rear LCD is protected from damage. Included within this kit are a battery grip, a remote shutter release that can be used wirelessly, a shutter release cable, an LCD screen protector, a cap keeper to prevent loss of your lens cap, and a battery pack that can be used as a replacement or spare for the Fujifilm X-T1's included battery.
The Vello BG-F1 Battery Grip is made exclusively for the Fujifilm X-T1 mirrorless digital camera. It holds one battery, effectively doubling your shooting time, and provides a comfortable grip when photographing in portrait orientation.
The grip has an alternate shutter release button to facilitate shooting when held vertically, with a lock to prevent accidental release. In addition, the grip has extra AE-L, AF-L, and FA buttons, as well as front and rear command dials. It is designed with an anti-slip rubber grip and a firm curvature to further improve handling. A tripod socket is included as is a holder for the camera's contact cover.
Trigger your camera's shutter wirelessly with the included FreeWave Plus Wireless Remote Shutter Release from Vello, a lightweight remote control system that will help you avoid unwanted camera movement. This 2.4 GHz model is compatible with the Fujifilm X-T1 mirrorless digital camera and will work wired, or wirelessly up to 320', depending on your own needs and setup. This makes it useful for photographing wildlife or for macro and long exposures where it is necessary to eliminate any chance of camera shake.
The FreeWave system also has access to 16 channels for triggering multiple receivers and has an internal antenna that will be protected from any accidental damage. Multiple features are available for shooting, such as a four-second delay as well as multi-exposure and long exposure modes. The device also has a dual function release, enabling focus on half press and triggering the shutter release on a full press. Additionally, it has LED indicators to confirm pre-focus and exposure when in wireless mode, while the receiver and transmitter each run on two AAA batteries.
The included Vello 2.5mm Remote Shutter Release Cable is a coiled cable for connecting a Vello remote shutter release receiver or other remote receiver with a 2.5mm jack to select Fujifilm cameras such as the Fujifilm X-T1.
The Vello LCD Screen Protector Ultra for Fujifilm X-T1 Camera is a sheet of ultra-thin (0.02") optical glass used to protect the LCD monitor of a Fujifilm X-T1 camera. Its static adhesion method leaves no sticky residue behind on your screen. Multiple layers of protective material shield your display from dirt, scratches, sweat, smears, and light impact. The shatter-proof glass blocks UV rays while allowing visible light in. It is easy to install without trapping any air bubbles, and is just as simple to remove. The protector can be easily cleaned using the supplied microfiber cloth and wet wipe.
The Cap Keeper Plus Lens Cap Holder from Sensei prevents the loss of lens caps. An adhesive-backed disc secures the lens cap to the elastic leash which wraps around a lens barrel. With the lens cap removed from the lens while shooting, it hangs out of the way but secure and within reach for easy retrieval. The Cap Keeper Plus is made with tough and extremely secure elastic.
The included lithium-ion battery pack is small, lightweight, and can be charged or discharged at any time without developing a memory effect. - Vello BG-F1 Battery Grip for Fujifilm X-T1 The Battery Grip from Vello is made exclusively for the Fujifilm X-T1 mirrorless digital camera. It holds one NP-W126 lithium-ion battery, effectively doubling your shooting time, and provides a comfortable grip when shooting in portrait orientation.
The grip has an alternate shutter release button to facilitate shooting when held vertically with a lock to prevent accidental release. In addition, the grip has extra AE-L, AF-L, and FA buttons, as well as front and rear command dials. It is designed with an anti-slip rubber grip and firm curvature to further improve handling. A tripod socket is included as is a holder for the camera's contact cover. UPC: 847628589575 - Vello FreeWave Plus Wireless Remote Shutter Release for Canon Trigger your camera's shutter wirelessly with the FreeWave Plus Wireless Remote Shutter Release from Vello, a lightweight remote control system that will help you avoid unwanted camera movement. This 2.4 GHz model is compatible with Canon cameras and will work both wired and wirelessly up to 320', depending on your own needs and setup. This makes it useful for photographing wildlife or for macro and long exposures where it is necessary to eliminate any chance of camera shake.
The FreeWave system also has access to 16 channels for triggering multiple receivers and has an internal antenna that will be protected from any accidental damage. Multiple features are available for shooting, such as a four-second delay as well as multi-exposure and long exposure modes. The device also has a dual function release, enabling focus on half press and triggering the shutter release on a full press. Additionally, it has LED indicators to confirm pre-focus and exposure while in wireless mode and the receiver and transmitter each run on two AAA batteries. - Compatible Cameras
- Canon EOS: 1DX Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5DS R, 5DS, 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 6D Mark II, 6D, 50D, 40D, 30D, 20D, 10D 7D Mark II, 7D, 80D, 70D, 60D, 77D (9000D), T7i (800D), T7 (2000D), T6s (760D), T6i (750D), T6 (1300D), T5i (700D), T5 (1200D), T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D), XSi (450D), XTi (400D), XT (350D), XS (1000D), Digital Rebel (300D), SL2 (200D), SL1 (100D), and Elan series
EOS R, RP, M6, M5
PowerShot: G1 X Mark III, G1 X Mark II, G1 X, G5 X, G3 X, G16, G15, G12, G11, G10, SX70 HS, SX60 HS, SX50HS
Contax: N and 645
Fujifilm: X-T3, X-T1, X-T30, X-E2, X-E1, X100T, X30
Hasselblad: H series
Olympus: OM-D E-M1 Mark II
Pentax: K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D
Samsung: NX10 & NX100; GX-1S, GX-1L, GX-10 & GX-20
Sigma: SD1, SD9, SD10, SD14 & SD15 UPC: 847628029507 - Vello 2.5mm Remote Shutter Release Cable for Select Fujifilm Cameras This Vello 2.5mm Remote Shutter Release Cable is a coiled cable for connecting a Vello remote shutter release receiver or other remote receiver with a 2.5mm jack to select Fujifilm cameras.
- Compatibility
- Fujifilm X-H1, X-PRO2, X-T2, X-T1, X-T20, XT10, X-T100, X-E3, X-E2s, X-E2, X-A5, X-A3, X-A10, X-A2, X-M1, X-100F, X-100T, X70, X30, XF10
UPC: 847628588196 - Vello LCD Screen Protector Ultra for Fujifilm X-A3, X-A5, X-T1 & X-T2 Camera This LCD Screen Protector Ultra from Vello is a sheet of ultra-thin (0.02") optical glass used to safeguard the LCD monitor of the Fujifilm X-A3, X-A5, X-T1 & X-T2. It easily adheres to the screen via static, without trapping air bubbles, and if removed, won't leave a sticky residue behind. Multiple layers of protective material shield your display from dirt, scratches, sweat, smears, and light impact. The shatter-proof glass blocks UV rays while allowing visible light in. It can be easily cleaned using the supplied microfiber cloth and wet wipe.
- Camera Compatibility
-
Fujifilm: - X-A3
- X-A5
- X-T1
- X-T2
UPC: 847628586949 - Sensei Cap Keeper Plus Lens Cap Holder The Cap Keeper Plus Lens Cap Holder from Sensei prevents the loss of lens caps. An adhesive-backed disc secures the lens cap to the elastic leash which wraps around the lens barrel. With the lens cap removed from the lens while shooting, it hangs out of the way but secure and within reach for easy retrieval. The Cap Keeper Plus is made with tough and extremely secure elastic. UPC: 847628553064
- Watson NP-W126 Lithium-Ion Battery Pack (7.4V, 1250mAh) The Watson NP-W126 Lithium-Ion Battery Pack works with the same cameras as the Fujifilm NP-W126. This replacement battery pack features a capacity of 1250mAh, 7.4V of output power and 9.25 watt-hours. Small and lightweight, lithium-ion batteries can be charged or discharged at any time without developing memory effect.
- Compatible Cameras
-
Mirrorless:- X-A3
- X-E1
- X-Pro 1
- X-T2
- X-T3
- X-T20
- X-T30
FinePix:- HS30EXR
- HS35EXR
- HS50EXR
UPC: 847628560772 In the Box - BG-F1 Battery Grip for Fujifilm X-T1 acxwwaxvefab
- Limited 1-Year Warranty
- FreeWave Plus Wireless Remote Shutter Release for Canon
- 2.5mm Remote Shutter Release Cable for Select Fujifilm Cameras
- LCD Screen Protector Ultra for Fujifilm X-A3, X-A5, X-T1 & X-T2 Camera acxwwaxvefab
- Sensei - Cap Keeper Plus Lens Cap Holder
- Watson - NP-W126 Lithium-Ion Battery Pack (7.4V, 1250mAh)
Table of Contents
|
Upload User Manual
Have you got an user manual for the Vello Accessory Kit for Fujifilm X-T1 Mirrorless Digital Camera in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Vello BG-F1 Battery Grip for Fujifilm X-T1
| Battery Type | 1 x Battery Pack (NP-W126) | | Tripod Mounting Thread | 1/4"-20 Female | | Operating Temperature | 32 to 104°F / 0 to 40°C | | Dimensions (L x W x H) | 5.0 x 1.9 x 1.5" / 12.7 x 4.8 x 3.8 cm | | Weight | 5.6 oz / 158.7 g | | | | Box Dimensions (LxWxH) | 6.2 x 3.2 x 2.9" | - Vello FreeWave Plus Wireless Remote Shutter Release for Canon
| Release Type | Wireless: RF (Radio Frequency) | | Camera Connection | Canon 2.5mm Sub-mini, Canon 3-pin (N3) | | Channels | 16 | | Wireless Frequency | 2.4 GHz | | Interval Timer/Programmable | No | | Live View | No | | Mobile Device/App-enabled | No | | Shutter Modes | Bulb, Continuous, Single Shot, 4-Second Delay, 1-Second Continuous | | Wireless Range | 328' / 100 m | | Receiver Power Source | Battery | | Receiver Battery Requirements | 2 x AAA | | Transmitter Power Source | Battery | | Transmitter Battery Requirements | 2 x AAA | | | | Box Dimensions (LxWxH) | 8.5 x 3.9 x 1.5" | - Vello 2.5mm Remote Shutter Release Cable for Select Fujifilm Cameras
| Length | Coiled: Approximately 16" / 40.6 cm
Stretched: Approximately 36" / 91.4 cm | | Connections | 2.5 mm jack to select Fujifilm cameras | | | | Box Dimensions (LxWxH) | 5.0 x 3.0 x 0.4" | - Vello LCD Screen Protector Ultra for Fujifilm X-A3, X-A5, X-T1 & X-T2 Camera
| Material | Glass | | Thickness | 19.69 mil / 0.5 mm | | | | Box Dimensions (LxWxH) | 3.9 x 3.8 x 0.9" | - Sensei Cap Keeper Plus Lens Cap Holder
| | | Box Dimensions (LxWxH) | 4.0 x 2.5 x 0.01" | - Watson NP-W126 Lithium-Ion Battery Pack (7.4V, 1250mAh)
| | | Capacity (Wh) | 9.25 Wh | | Amp-Hours | 1250 mAh | | Chemistry | Lithium-Ion | | Output Voltage | 7.4 VDC | | Dimensions (W x H x D) | 1.9 x 1.4 x 0.6" / 4.7 x 3.6 x 1.5 cm | | Weight | 1.8 oz / 51 g | | | | Box Dimensions (LxWxH) | 5.4 x 3.1 x 1.0" |
Rating70% users recommend this product to others. And what about you?
This product has already been rated by 98 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
