USER MANUAL | Library of PDF Instruction Manuals in English! Manuals for all brands

User manual
Waves Diamond - Comprehensive Audio Processing

Search your instruction manual in PDF to download

User Manual for Waves Diamond - Comprehensive Audio Processing Plug-Ins Bundle

Click to enlarge the picture

Contents of the user manual for the Waves Diamond - Comprehensive Audio Processing

Product category: Virtual Processor Plug-Ins Waves
Brand: Waves
Description and content of package
Technical information and basic settings
Frequently asked questions – FAQ
Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
Authorized service for Waves Virtual Processor Plug-Ins

User manual for the Waves Diamond - Comprehensive Audio Processing contain basic instructions that need to be followed during installation and operation. Before starting your appliance, the user manual should be read through carefully. Follow all the safety instructions and warnings, and be guided by the given recommendations. User manual is an integral part of any Waves product, and if it is sold or transferred, they should be handed over jointly with the product. Following the instructions for use is an essential prerequisite for protecting health and property during use, as well as recognition of liability on the part of the manufacturer for possible defects should you make a warranty claim. Download an official Waves user manual in which you will find instructions on how to install, use, maintain and service your product.

And do not forget – unsuitable use of a Waves product will considerably shorten its lifespan!

Product description

Diamond from Waves is a bundle of over sixty audio processing plug-ins designed for personal, professional, sound design, and post production studios. It includes everything from reverb to pitch correction, spatial imaging, harmonic enhancement, compressors, equalizers, a level maximizer, effects, restoration tools, and more. In addition to the items listed below, the bundle includes the L3 Ultramaximizer, L3-LL Multimaximizer, and L3-LL Ultramaximizer low-latency multiband peak limiter/level maximizing plug-ins.

AudioTrack - Multi-Processor Plug-In (Native/SoundGrid, Download) AudioTrack from Waves is a plug-in that features three complete processors in a single, easy-to-use interface. Ideal for multimedia, voiceovers, project studios, and more, the plug-in contains a four-band EQ, compressor/expander, and a gate.
- Four-band EQ
- Peak reference compression with automatic gain compensation
- Gate with adjustable attack and release
- Double precision bit resolution processing
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
C1 Compressor - Dynamics Plug-In (Native/SoundGrid, Download) C1 Compressor from Waves is a dynamics processor plug-in featuring three distinct modules. The compressor/expander, gate/expander, filter/EQ sections allow the plug-in to fulfill multiple functions, either as separate processors, or combined for maximum flexibility. The plug-in includes Native, SoundGrid and TDM licenses.
- Compressor plug-in with gate and sidechain
- Compressor/expander, gate/expander, filter/EQ modules
- Split-band dynamics
- Internal and external side-chaining
- Look-ahead feature for precision transient processing
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
C4 Multiband Compressor - Dynamics Processor Plug-In (TDM/Native/SoundGrid, Download) C4 Multiband from Waves is a multiband dynamics processor plug-in that features four bands of up and down expansion, limiting, and compression, along with dynamic and standard EQ. By combining the technologies from the Renaissance Compressor and the C1 Parametric Compander, the plug-in provides comprehensive and transparent control over the contours of a mix.
- Multiband compressor plug-in
- Four parametric bands
- Sculpt vocal frequency and dynamic response with pinpoint precision
- Control, compress, and accentuate different parts of drum kits
- Shape mixes dynamically using frequency-based compression and expansion
- ARC Auto Release Control
- Double precision bit resolution processing
- Up to 24-bit/192 kHz resolution (Native) and up to 96 kHz (TDM)*
  *Accel card required for 96 kHz operation
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Center - Spatial Imaging Adjustment Plug-In (Native/SoundGrid, Download) Center from Waves is a plug-in useful for fine tuning final mixes and for mastering applications. The software allows for separating the phantom center in stereo sources from the side (L/R) content in order to bring out or bring down the vocals, or whatever occupies the center space, without affecting everything else.

Conversely, it is possible to widen or narrow the side content without disturbing the center, aiding post-production engineers as well as DJs, to reposition, isolate, and even eliminate elements from a mix.
- Mastering plug-in
- Change lead vocal levels during mastering
- Add high-end sparkle to side content without affecting center information like vocal, kick, and snare
- Accentuate or tame the overheads in a drum submix
- Bring out just the kick and snare in a drum loop
- Enhance the room ambience on stereo percussion tracks
- Add punch to the kick and snare in an already mixed track
- In post production, focus dialogue captured with stereo microphones
- Lower vocals in songs for karaoke versions
- Up to 24-bit/192 kHz resolution (Native) and 96 kHz (TDM)*
  *Accel card required for 96 kHz operation
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
DeEsser - Sibilance Removal Plug-In (Native/SoundGrid, Download) DeEsser from Waves is a plug-in used to reduce excessive sibilance ("ess" and "shh" sounds) from vocal tracks. Inspired by vintage gear for precision de-essing and high frequency limiting, the plug-in delivers smooth and natural output without complicated adjustments.
- Sharp side-chain filters
- Wide-band or split compression modes
- Audio (source) or side-chain monitoring
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Doppler - Doppler Effect Plug-In (Native/SoundGrid, Download) Doppler from Waves is a plug-in that produces the sonic effect of a sound source moving towards or away from a listener, simulating the classic Doppler effect. The plug-in allows for control of the frequency change, speed, and distance from the sonic source with pinpoint accuracy.
- Auto-detection or manual triggering
- Creative "click and drag" simplicity
- Energy, manual, continuous cycling and one-shot modes
- Reverb with time and brightness controls
- Up to 24-bit/96 kHz resolution (Native) and up to 48 kHz (TDM)
- Mono-to-stereo and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Doubler - Double Tracking Effects Plug-In (Native/SoundGrid, Download) Doubler from Waves is a plug-in that can automatically create a double-track effect, especially useful for vocals. Using adjustable delay and pitch modulation, the plug-in adds a rich texture on vocals, but works equally well on polyphonic instruments and full mixes.
- Double-tracking/chorus plug-in
- Create '80s harmonizer and pitch detune effect
- Two- and four-voice components
- Double vocal parts automatically
- Add flam-like effects to drums
- Up to 24-bit/192 kHz resolution (Native) and 96 kHz (TDM)*
  *Accel card required for 96 kHz operation with only 2 voices mono or m/s available at 96 kHz
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Enigma - Multi-Effects Modulation Plug-In (Native/SoundGrid, Download) Enigma from Waves is a plug-in that allows for twisting, bending, and mangling of sounds with effects that go beyond phasing and flanging. The software uses a combination of filters, short delay feedback loops, reverb, LFO modulation, and more to create radical, and unusual sonic textures.
- Three plug-in modules - notch, modulator, and feedback
- Tempo sync
- Up to 24-bit/192 kHz resolution
- Mono-to-stero and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
GTR3 - Guitar Amps, Stomp Boxes, Tuner Plug-Ins Bundle (Native/SoundGrid, Download) GTR3 from Waves packages together four plug-ins that are only available in this and other select bundles. GTR3 Amps delivers vintage and contemporary amps, inspired by amplifiers from Fender Marshall, Mesa/Boogie, Vox and others. From distortion, doubler and delay to flanger, phaser, fuzz and more, GTR3 Stomps provides all the processors needed to customize guitar tone. It includes features like sync-to-host BPM and real-time MIDI control.

GTR ToolRack features virtual guitar amps, cabs and effects and runs as a plug-in or as a standalone application for real-time processing. The latter allows the performer to plug their guitar straight into a laptop and process the sound live on stage, using a MIDI foot controller for real-time preset selection and sound manipulation. Each instance of GTR3 ToolRack holds up to six GTR Stomps, two GTR Amps, and the GTR Tuner, a chromatic tuner that can be set to standard, alternate, and chromatic tunings. Note: GTR3 ToolRack is a Native application and has only partial SoundGrid compatibility. GTR3 Tuner is not available for Avid VENUE.
- - 25 modeled amps guitar and 7 bass amps
  - Clean, drive and high gain guitar amps
  - Custom amps by Neil Citron
  - Up to 24-bit/96 kHz resolution (for TDM use, Accel card required for 96 kHz operation, with no stereo available at that rate)
  - Mono, mono-to-stereo, and stereo components
  - SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- - Drag and drop effects into the virtual pedal board
  - 26 state-of-the-art effects
  - Chain up to six effects per track
  - Up to 24-bit/96 kHz resolution (for TDM use, Accel card required for 96 kHz operation, with OverDrive stereo only available up to 48 kHz)
  - Mono, mono-to-stereo, and stereo components
  - SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- - 32 amps and 29 cabs
  - Multiple mics and mic settings
  - Standalone, no DAW required
  - Up to 24-bit/96 kHz resolution (Native and SoundGrid only)
  - Mono-to-stereo and stereo components
  - SoundGrid license compatible with StudioRack Native, StudioRack SoundGrid and eMotion ST Mixer
- - Precision accuracy
  - Chromatic tuning
  - One-click inline accessibility
  - Up to 24-bit/96 kHz resolution
  - Mono component only
  - SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
H-Comp Hybrid Compressor - Dynamics Plug-In (Native/SoundGrid, Download) H-Comp from Waves is a hybrid compressor plug-in that models the behavior of transformer, tube, and transistor circuits, and combines them with the repeatability of software. The compressor's release performance is specifically modeled on the corresponding analog behavior, while a wet/dry control allows for parallel compression.

Other features include multiple sync functions, an output limiter, and access to the compressor circuitry via an external side-chain for additional compression control.
- Hybrid compressor plug-in
- Analog modeled release behavior
- Wet/dry mix for easy parallel compression
- Transient pass-through punch control
- BPM-sync release function
- Analog character modes
- Output limiter/clipper modes
- External side-chain support
- Up to 24-bit/192 kHz resolution*
  *For TDM use Accel card required for 192 kHz operation
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
H-Delay Hybrid Delay Delay Plug-In (Native/SoundGrid, Download) H-Delay from Waves is a hybrid delay plug-in that features old school PCM42-style effects like filtering, flanging, and phasing, along with slap-back echo, ping-pong delay, and tempo-sync with modulation. The plug-in has full MIDI support.

An intuitive interface aids in quickly creating an effect using a comprehensive set of controls and includes a tap tempo pad for manually tapping in a tempo. Internal or host-to sync is also available, and the high- and low-pass filters can be linked.
- Hybrid delay plug-in
- Up to 3.5 seconds delay time
- Variable pitch delay time behavior
- Analog character and LoFi modes
- Infinite feedback support
- LFO-controlled pitch modulation
- Tap Pad for easy delay time setting
- Sync-to-host or manual BPM
- Full MIDI support
- Supports sample rates up to 96 kHz
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
IR-L Convolution Reverb - Stereo Reverb Plug-In (Native/SoundGrid, Download) IR-L Convolution Reverb from Waves is a convolution based, stereo reverb plug-in that is capable of recreating the sound of real acoustic spaces. Over 100 impulse responses are provided, editable via the easy and efficient, streamlined interface. Unlike some convolution reverbs that deliver a static response, the IR-L has the ability to extended the RT60 decay time of a particular space without affecting the reverb's envelope and frequency content.
- Easy-to-use convolution reverb plug-in
- Delivers the sampled sound of world-famous venues
- Includes over 100 impulse responses of spaces and devices
- Up to 24-bit/96 kHz resolution
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native and StudioRack Native only
L1 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download) L1 Ultramaximizer from Waves is a plug-in that provides dynamics control for any audio application, from multimedia to mastering. The software features look-ahead peak limiting, level maximization, and high resolution re-quantization, and is known for its transparency and punch.
- Peak limiter/level maximizer plug-in
- Two components: L1 Ultramaximizer and L1 Ultramaximizer+
- IDR (Increased Digital Resolution) dither with noise shaping filter
- Double precision bit resolution processing
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
L2 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download) L2 Ultramaximizer from Waves is a plug-in that provides dynamics control for mixing, mastering, and more. The software features look-ahead brickwall peak limiting, level maximization, and ultra high resolution re-quantization for crystal clear level gain.
- Peak limiter/level maximizer plug-in
- Manual and ARC Automatic Release Control
- IDR (Increased Digital Resolution) with double precision bit re-quantization and dither with 9th-order noise shaping filter
- Double precision bit resolution processing
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
L3 Multimaximizer - Multi-Band Limiter Plug-In (Native/SoundGrid, Download) The L3 Multimaximizer from Waves is a plug-in that performs multi-band peak limiting, delivered in two versions. The Multimaximizer and Ultramaximizer plug-ins both utilize the "Peak Limiting Mixer" (PLMixer) engine, with the only difference being less control provided on the Ultramaximizer.

The plug-in uses linear phase crossover filters to divide the audio spectrum into five bands. The PLMixer then uses psychoacoustic criteria to intelligently decide how much attenuation to apply to each band so that all available headroom is used.

The result is that inter-modulation is minimized and overall loudness is maximized, while brick-wall limiting is still maintained - all while retaining a single master threshold control. With its transparent operation, brick-wall limiting, dithering and noise shaping control, the L3 is able to function as a complete mastering processor.
- Multiband peak limiter/level maximizer plug-in
- Linear phase EQ avoids strident highs and delivers punchy lows
- Master and individual ARC Automatic Release Controls
- IDR (Increased Digital Resolution) with double precision bit re-quantization and dither with 9th-order noise shaping filter
- Also includes L3 Ultramaximizer
- Up to 24-bit/96 kHz resolution*
  *For TDM use, Accel card required for all sample rates
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Linear Phase EQ - Mastering Equalizer Plug-In (Native/SoundGrid, Download) The Linear Phase EQ from Waves is a plug-in created with mastering as its main focus. The linear phase filters preserve the original musical balance with absolutely zero phase shift, while providing precise control over the harmonic spectrum.
- Equalizer plug-in for mastering
- Five user-definable bands of EQ with linear phase crossovers
- Lowband and broadband components*
  *When using LinEQ Broadband for TDM, stereo not available at 96 kHz
- Nine linear phase filter types
- Ideal for acoustic instruments, stereo sources, transient-heavy tracks, and mastering
- Up to 24-bit/96 kHz resolution*
  *For TDM use, Accel card required for 96 kHz
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Linear Phase Multiband Compressor - Multiband Compression Plug-In (TDM/Native/SoundGrid, Download) The Linear Phase Multiband Compressor from Waves is a multiband dynamics plug-in for mixing, mastering, and more. The software utilizes technologies like Adaptive Thresholds, Automatic Makeup Gain, and Finite Response Filters.

The inclusion of linear phase crossovers allows the plug-in to function without any phase-based distortion, and each of the five bands features threshold, gain, range, attack and release controls for transparent multiband compression.
- Multiband compressor plug-in for mastering
- Five user-definable bands with linear phase crossovers
- ARC Automatic Release Control
- Ideal for mastering and other high-precision applications
- Up to 24-bit/96 kHz resolution*
  *For TDM use, Accel card required for 96 kHz operation
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
MaxxBass - Bass Enhancement Plug-In (Native/SoundGrid, Download) MaxxBass from Waves is a plug-in for enhancing the perceived loudness of the bass content in an audio source. The software uses psycho-acoustics to calculate precise harmonics that are related to the fundamental tones of sound. When these harmonics are combined with the original signal, it creates the effect of lower, deeper frequencies that is apparent on virtually any speaker.
- Extends perceived bass response by up to 1.5 octaves
- Preserves the dynamic range and character off the original bass
- Mixed output, MaxxBass, and original bass monitoring
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
MaxxVolume - Dynamics Plug-In (Native/SoundGrid, Download) MaxxVolume from Waves is a four-way dynamics processor plug-in that combines several technologies from the company's other processors into a single, unified interface. Building on the L2 Ultramaximizer, C1 Parametric Compander, Renaissance Vox, and Renaissance Compressor, the plug-in provides a unique functionality for mixing and mastering, as well as broadcast and post-production.

When used with vocals, the processor allows the vocal to stay in focus with automatic level riding. When working with instruments, the plug-in can control the dynamic range without the artifacts of compressors and limiters. And for broadcast, the engineer can bring any program material to a fixed destination level, making it ideal for radio and TV, podcasting, Internet streaming, and more.
- High and low level compression, gating, and leveling in one plug-in
- Bring out room ambience and detail
- Add body and detail on acoustic instruments
- Level dialog and other post-production elements
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
MetaFlanger - Flanger Plug-In (Native/SoundGrid, Download) MetaFlanger from Waves is a plug-in for emulating the sound of great vintage tape flanging and phaser. The software is capable of generating anything from gentle choruses and dual-delay flanging sounds, to sharp phasing and extreme jet sweeps.
- Flanging, phasing, chorusing, and more
- Works well as a vocal effect
- Tape delay emulation switch
- LFO depth and waveform display
- Modulation Stop switch to freeze the LFO
- Tempo sync
- Extensive presets including emulations of vintage gear
- Up to 24-bit/192 kHz resolution
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
MondoMod - Modulation Plug-In (Native/SoundGrid, Download) MondoMod from Waves is a modulation plug-in for creating unique sonic textures ranging from tranquil to turbulent. The software uses a combination of linked AM (Amplitude Modulation), FM (Frequency Modulation) and rotation modulators. The software features five selectable waveforms for the LFO, and the overall tempo of the modulators can be synchronized to the host software.
- Three main modules: AM for tremolo, FM for vibrato and rotation for panning
- LFO with five selectable waveforms
- Tempo sync
- Up to 24-bit/192 kHz resolution
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Morphoder - Vocoder Plug-In (TDM/Native/SoundGrid, Download) The Morphoder from Waves is a plug-in that redefines the sound of the classic vocoder. The plug-in allows for combining two distinct audio signals to create new and perhaps strange sonic combinations, with unmatched clarity and definition.

At the heart of the plug-in is an eight-voice synthesizer with formant control and a modulator with a Linear Phase EQ. MIDI control is also available. A four-octave virtual keyboard provides note input directly from within the plug-in.
- 8-voice stereo synthesizer
- Formant control
- Modulator with Linear Phase EQ
- MIDI control
- Up to 24-bit/96 kHz resolution*
  *For TDM use, Accel card required for 96 kHz operation
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
MV2 - Compressor Plug-In (Native/SoundGrid, Download) MV2 from Waves is a compressor plug-in that is as effective as it is deceptively simple. With high and low level compression controlled by a streamlined interface, the plug-in is the simplest, most flexible way to control sound using intuitive dual faders for quick dynamic optimization.
- High- and low-level compression in a single interface
- Intuitive and simple controls for quick dynamic optimization
- Great for dialogue and post-production leveling
- Brings out room ambience and detail
- Adds body and detail to any instrument
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
OneKnob Driver - Overdrive/Distortion Plug-In (Native/SoundGrid, Download) OneKnob Driver from Waves is a single-knob operated overdrive plug-in inspired by famous guitar overdrive pedals. It can produce tones ranging from light overdrive to full distortion. In addition to guitar tracks, the OneKnob Driver can be used on vocals, piano, synths, drums, and bass. The plug-in includes both Native and SoundGrid licenses.
- Easy-to-use distortion plug-in inspired by famous guitar pedals
- From light overdrive to full-on metal crunch
- Ideal for guitars, bass, drums, vocals and more
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
OneKnob Filter - Sweepable Filter Plug-In (Native/SoundGrid, Download) OneKnob Filter from Waves is a single-knob-operated sweepable filter plug-in with switchable resonance modes. It can be used for live DJ performances, on full mixes, loops, or synthesizer tracks. The plug-in includes both Native and SoundGrid licenses.
- Easy-to-use filter plug-in for electronic music
- Sweepable filter with switchable resonance modes
- Perfect for full mixes, loops, analog synths and more
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
PAZ Analyzer - Audio Signal Analyzer Plug-In (Native/SoundGrid, Download) The PAZ Analyzer from Waves is an audio analysis plug-in that generates a comprehensive real-time visual representation of the audio's stereo positioning, frequency spread, and peak/RMS levels. It shows the peak and RMS displays with individually re-settable peak hold values, and provides optional resolution in 10 Hz steps for precise analysis below 250 Hz. The analysis graphic output can be saved as a text file.
- Audio analysis tool with three plug-in components - position, frequency and meter
- L/R peak and RMS analysis modes and displays, with individually re-settable peak hold values
- Optional resolution in 10 Hz steps for precise analysis below 250 Hz
- 52- or 68-band analysis
- Real-time vector display with zoom
- Results can be saved as text file
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
PS22 Stereo Maker - Spatial Enhancement Plug-In (Native/SoundGrid, Download) The PS22 Stereo Maker from Waves is ideal for revitalizing old recordings, as well as sound effects, guitar leads, and more. The software provides mono-to-stereo emulation, can be used to enhance individual tracks, or for re-balancing the spatial imaging of a stereo mix.
- Psycho-acoustic spatial enhancement and phase-compensation
- For enhancing individual tracks, or re-balancing the spatial imaging of stereo mixes
- Retains mono compatibility
- Preserves original frequency response
- Left/right or MS meter monitoring
- Up to 24-bit/192kHz resolution
- Mono-to-stereo and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
PuigTec EQs - Program and Midrange EQ Plug-Ins (Native/SoundGrid, Download) PuigTec EQ from Waves provides a pair of EQ plug-ins that used together provide a full-range, vintage EQ chain. Both original Pultec hardware units on which the plug-ins have been modeled, continue to this day to be mainstays at high-end studios.

The EQP-1A is known for its unique ability to boost and cut the same frequencies simultaneously, thereby creating a resonant shelf. The distinctive midrange tonal characteristics of the MEQ-5 make it the perfect complement to the EQP-1A.
- Modeled on a rare vintage Pultec EQs
- EQP-1A offers its signature resonant low shelf boost
- MEQ-5 is the midrange complement to EQP-1A
- Up to 24-bit/96 kHz resolution*
  *For TDM use, Accel card required for all sample rates
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Q10 Equalizer - Paragraphic EQ Plug-In (TDM/Native/SoundGrid, Download) The Q10 from Waves is a paragraphic EQ plug-in that features up to ten frequency bands within seven components. The software delivers precision equalization for mixing and mastering alike, with each band having the same extended frequency range, and the ability to narrow the bandwidth (Q) for more surgical tasks.

With presets that cover a wide range of applications and advanced noise shaping, the software provides the tools for both creating special effects and spectral modifications that range from subtle to extreme. The plug-in includes Native, SoundGrid and TDM licenses.
- Seven plug-in components - 1, 2, 3, 4, 6, 8 and 10 bands
- Separate or linked processing and parameter control
- Advanced noise-shaping for optimum fidelity
- Presets for multimedia, pseudo-stereo, band limiting, comb filtering, crossovers, hum removal, and more
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Q-Clone - EQ Preset Modeling Plug-In (Native/SoundGrid, Download) Q-Clone from Waves is an EQ modeling plug-in that consists of two parts; the first features a large library of classic EQ presets, taken from multiple hardware units. The second, Q-Capture, allows the user to capture custom settings of any hardware EQ at hand.

The software sends a known signal into the hardware EQ set to its desired settings and the return sound is then analyzed and promptly made into an EQ preset that can be reused any number of times. This way a mix can be built with different EQ settings on each track using a single hardware EQ.
- Model favorite hardware equalizers
- Two components: Q-Clone and Q-Capture
- Includes large library of modeled EQs
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Renaissance Axx - Dynamics Plug-In (Native/SoundGrid, Download) The Renaissance Axx from Waves is a dynamics plug-in engineered especially for guitar and bass. Settings can be dialed in very easily via a three-parameter interface that includes a fixed ratio curve, automatic release value, and an output limiter to prevent clipping.
- Easy-to-use compressor plug-in
- Ideal for guitar and bass
- Streamlined 3 parameter control
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Renaissance Bass - Bass Enhancement Plug-In (Native/SoundGrid, Download) The Renaissance Bass from Waves is a bass enhancement plug-in featuring the company's MaxxBass psycho-acoustic technology. Tightening up the bass component of mix, or any material for that matter, has never been easier, while at the same time providing the ability to extend the perceived bass depth by up to 1.5 octaves without stressing the speaker system.
- Bigger, tighter bass from any system
- Extends perceived bass response by up to 1.5 octaves
- Clip-free performance
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Renaissance Channel - Channel Strip Plug-In (Native/SoundGrid, Download) Renaissance Channel from Waves is a channel strip plug-in featuring equalization, compression, limiting, and gating in a single convenient interface. Borrowing processors from the company's Renaissance line of plug-ins, the channel strip can function equally well during tracking and mixing.
- EQ, compression, gating, and limiting in one plug-in
- Selectable EQ/dynamics signal flow
- Stereo rotation control
- Up to 24-bit/192 kHz resolution (Native) and 96 kHz (TDM)
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Renaissance Compressor - Dynamics Plug-In (Native/SoundGrid, Download) The Renaissance Compressor from Waves is a compressor plug-in that features two compression modes: vintage opto and modern electro. Featuring a streamlined interface, the plug-in utilizes technologies from both the company's C1 Parametric Compander, along with the L1 Ultramaximizer.
- Vintage opto and modern electro compression modes
- Internal brickwall limiting for clip-free output
- ARC (Auto Release Control) for increased RMS levels
- Easy to use
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Renaissance DeEsser Channel Strip Plug-In (Native/SoundGrid, Download) The Renaissance DeEsser from Waves is a plug-in used to reduce excess sibilance (ess and shh sounds) from vocal tracks. A sibilance attenuator reduces undesirable high frequencies while preserving the integrity of the source. A variety of presets for both male and female voices along with the functionality of audio or side-chain monitoring, allows for spotting problem areas and fixing them with accuracy and ease.
- Ideal for tracking, mastering, live sound, and broadcast
- Adaptive threshold and adjustable gain reduction
- Phase compensated crossover
- Audio or side-chain monitoring
- Supports sample rates up to 192 kHz
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Renaissance Equalizer - EQ Plug-In (Native/SoundGrid, Download) The Renaissance Equalizer from Waves is a paragraphic EQ plug-in that features real-time EQ graphing, vintage-modeled filter curves, and extended internal headroom.
- 2, 4, and 6 band components
- Filter-curves based on vintage analog equalizers
- Intuitive operation
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Renaissance Reverb - Classic Reverb Plug-In (Native/SoundGrid, Download) The Renaissance Reverb from Waves is a reverb plug-in that features the classic, rich reverb tails of high-end hardware reverbs, while delivering precise control over all aspects of the reverb simulation.

The software provides an advanced early reflection system, and dual-band EQ and damping controls. An interesting feature of the early reflections is the ability to input negative values, thus delaying the dry signal. This can create an interesting bloom effect before the onset of the dry signal.
- Twelve reverb types
- De-correlation for subtle early reflections changes and fine tuning
- Negative predelay value delays the dry signal
- Supports sample rates up to 96 kHz
- Mono to stereo and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Renaissance Vox - Dynamics Processor Plug-In (Native/SoundGrid, Download) Renaissance Vox from Waves is a plug-in that provides optimized dynamics control for vocals. The interface features simple, streamlined controls for compression, gate/expansion, limiting, and level maximization. With just a few adjustments, vocals can take on a vivid and smooth sound.
- Compression, gating, limiting, and level maximization in one plug-in
- Soft-knee compressor with auto make-up gain
- Gentle downward expander for noise gating
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
S1 Stereo Imager - Stereo Enhancement Plug-In (Native/SoundGrid, Download) S1 Stereo Imager from Waves is a plug-in that provides the tools to manipulate the spatial imaging of audio material. Using psycho-acoustic techniques, the software can enhance and alter stereo separation using a choice of three components. It can, among other things, make the stereo field wider or narrower, place objects outside of the speakers, or compensate for a "lopsided" image.
- Three components - Shuffler, Imager, and MS Matrix
- Left/Right and M/S input modes and metering
- Up to 24-bit/192 kHz resolution
- Stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
SoundShifter - Pitch and Time-Shift Plug-In (Native/SoundGrid, Download) SoundShifter from Waves is a three-component plug-in that delivers pitch or time shifting without losing the punch, groove and transients of the original source material. The plug-in allows for changing key, changing tempo, changing duration, and manipulating the time-pitch continuum with accuracy and clarity.
- Parametric, graphic, and real-time components
- Punchy, smooth, transient, and sync modes
- Multiple link, display, and control options
- Time, tempo, bars, samples, SMPTE, feet and frames, pitch, interval, and frequency controls
- Mono and stereo components
- Up to 24-bit 96 kHz resolution
- SoundGrid license compatible with MultiRack Native and StudioRack Native only
SuperTap - Analog Style Delay Plug-In (Native/SoundGrid, Download) SuperTap from Waves is a delay plug-in inspired by the sound and legacy of analog tape. Featuring extensive modulation, panning, and filter options, the software delivers analog style with digital precision. Tempo entry can be achieved automatically using the sync to host tempo functionality, or by using the Tap-Pad feature for tapping in a tempo setting.
- Delay and echo effects
- 2-and 6-tap components
- Tap-Pad for tempo tapping or pattern switching
- Global LFO modulation and two feedback modes
- Spatial positioning vector display
- Up to 24-bit/192 kHz resolution (Native) and up to 96 kHz (TDM)*
  *Accel card required for 96 kHz operation
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Trans-X - Transient Modifying Plug-In (Native/SoundGrid, Download) TransX from Waves is a processor plug-in that modifies the shape of transients, either sharpening or softening the edges. Use of the software allows for breathing life into dull sounding drum loops, accentuating or attenuating instrumental attacks, and modifying room acoustics. The plug-in can also highlight sustains and can be used on individual tracks or, with judicious use, on complete mixes.
- Ideal for drum tracks and loops
- Adds punch, softens edges, highlights sustain
- Multi (4-band) and Wide (wide-band) components
- Multi features individual range and sensitivity for each band
- Up to 24-bit/192 kHz resolution*
  *When using TDM, Trans-X Multi available up to 48 kHz only
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
TrueVerb - Real Room Simulation Plug-In (Native/SoundGrid, Download) TrueVerb from Waves is a reverb plug-in designed to simulate real acoustic spaces. It combines reverb with an early reflections simulator to create natural-sounding virtual acoustic environments. The software features a flexible graphic interface and a wide range of editing parameters.
- Thru and send modes
- Independent and linked distance and reverb modes
- Time and frequency response graphic interface
- Up to 24-bit/96 kHz resolution
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
UltraPitch - Harmonizing Plug-In (Native/SoundGrid, Download) UltraPitch from Waves is a plug-in designed for achieving thick stereo chorusing, doubling, parallel harmonization, vocal slap back and spread effects, and much more. Using three modules it's possible to transpose, harmonize, modulate, and transform any sound. Multiple factory presets, including classic setups, are conveniently available.
- Three plug-in modules - shift, 3-voice and 6-voice
- Pitch detector and voice character graphs
- Random asynchronicity using animation amount control
- Linked or free formant correction curves
- Up to 24-bit/96 kHz resolution (Native) and up to 48 kHz (TDM)
- Mono and mono to stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
V-Comp - Vintage Hardware Compressor Plug-In (Native/SoundGrid, Download) V-Comp from Waves is a dynamics plug-in that uses time constants and a fixed nominal output gain to recreate the famous output-bus sound signature of a vintage 2254 hardware compressor. The plug-in is very responsive, with only a little gain reduction needed to glue a mix together.
- Modeled vintage compressor plug-in
- All-in-one compression, limiting and de-essing
- Based on the Neve 2254
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
V-EQ3 - Vintage Style EQ Plug-In (Native/SoundGrid, Download) The V-EQ3 from Waves is a three-band EQ plug-in modeled after the 1066 and 1073 console modules, two of the most sought after EQs. It features the same classic frequency cutoff points as the originals, along with a variable high-pass filter.
- Modeled vintage equalizer plug-in
- Based on the Neve 1066 and 1073 modules
- High pass, low-frequency shelf, mid-frequency bell and high-frequency shelf filters
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
V-EQ4 - Vintage Style EQ Plug-In (Native/SoundGrid, Download) The V-EQ4 from Waves is a four-band EQ plug-in modeled after the 1081 console module and features detailed high frequency boosts, plus high-pass and low-pass filters. The software conveys the vintage character of the original hardware while simultaneously delivering modern digital usability.
- Modeled vintage equalizer plug-in
- Based on the Neve 1081 modules
- Smooth, responsive performance
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Vitamin Sonic Enhancer - Multiband Harmonic Enhancer Plug-In (Native/SoundGrid, Download) The Vitamin Sonic Enhancer from Waves is a multi-band harmonic enhancer and tone-shaping plug-in that can improve the sound of an audio file by mixing an enriched version with the original signal. With its zero-latency processing, the plug-in is suitable for studio and live mix engineers alike. Used as an insert on any track or buss, the plug-in delivers a result comparable to what can be obtained from a parallel chain of EQ, compression and saturation processors, but without the need for complex connectivity.
- Parallel multiband harmonic enhancer with five individual bands
- Control over the crossover frequency points between bands
- Control over the mix of the direct signal with the enhanced version
- Per-band stereo width control
- Punch control for smoothing or accentuating punchiness and dynamics
- Zero-latency processing
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Waves Tune LT - Pitch Transforming Plug-In (Native, Download) Waves Tune LT from Waves is a "lite" edition of Waves Tune and uses an intuitive interface and simplified controls. Like its big brother, it will automatically tune a vocal track, making the changes as gentle or as aggressive as required, using default parameters or custom settings. Selecting the root note and scale allows the plug-in to correct to the notes in that key. In addition to dozens of preset scales, custom scales can be created.
- "Lite" version of Waves Tune
- Operates in sync and controls host transport using ReWire
- Pitch edit graph with waveform overview, timeline, piano roll and pitch editor
- Three timeline modes including bars/beats, minutes/seconds and samples
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
WLM Plus Loudness Meter - Precision Metering Plug-In (Native/SoundGrid, Download) The WLM Plus Loudness Meter from Waves is a plug-in that provides precision loudness measurement and metering for broadcast, movie trailers, games, packaged media and more. Compliant with all current ITU, EBU and ATSC specifications, the plug-in offers comprehensive momentary, short term, long term, and true peak readouts. Additionally, the software features a warning and logging system that keeps track of levels, and provides an alert when target settings are exceeded or have fallen short.
- ITU 1770-3, EBU and ATSC compliant
- Foreground, dialog, and average loudness measurements
- Momentary, short term and long term readouts
- Gain and trim controls for loudness normalization and correction
- True Peak meter and True Peak limiter
- Up to 24-bit/96 kHz resolution
- Mono, stereo, and 5.0, 5.1 components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
X-Click - Transient Noise Removal Plug-In (Native/SoundGrid, Download) X-Click from Waves is an audio restoration plug-in that removes transient noise often found in vinyl and shellac records. Clicks, spikes, switching noise and digital crosstalk material can be modulated while preserving the sonic integrity of the source. An Audio/Difference switch allows for monitoring just the offending artifacts.
- Visual scope displays intensity of clicks
- Audio and difference monitoring
- Real-time track insert capability
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
X-Crackle - Surface Noise and Crackle Removal Plug-In (Native/SoundGrid, Download) X-Crackle from Waves is an audio restoration plug-in that employs advanced psycho-acoustic algorithms to remove crackles and surface noise from vinyl records and damaged recordings. The crackles and surface noise can be modulated while preserving the sonic integrity of the source. An Audio/Difference switch allows for monitoring just the offending artifacts.
- Audio and difference output monitoring
- Frequency-based visual scope display
- Real-time track insert capability
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
X-Hum - Hum Removal Plug-In (Native/SoundGrid, Download) X-Hum from Waves is an audio restoration plug-in that employs an easy to use interface to attenuate ground loop hum, DC offset, and low-frequency rumble caused by turntables and tape machines. Using eight harmonically linked notch filters allows for modulating the noise while preserving the sonic integrity of the source. An Audio/Difference switch allows for monitoring just the offending artifacts.
- Eight Harmonic notch filters
- Frequency and amplitude attenuation display
- Audio and inverse monitoring
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
X-Noise - Steady-State Noise Removal Plug-In (Native/SoundGrid, Download) X-Noise from Waves is an audio restoration plug-in that employs the same intuitive controls often found on traditional dynamics processors used for removing tape hiss, air conditioner or computer noise from individual tracks, complete mixes, or damaged recordings. The noise can be modulated while preserving the sonic integrity of the source. An Audio/Difference switch allows for monitoring just the offending artifacts.
- Real-time parameter control and monitoring
- Learn mode for noise Profile creation
- Frequency-based spectral display
- Audio and Difference output monitoring
- Up to 24-bit/96 kHz resolution*
  *For TDM use, no stereo operation at 96 kHz
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
Z-Noise - Noise Reduction Plug-In (Native/SoundGrid, Download) Z-Noise from Waves is a broadband noise processor ideal for removal of tape hiss, ground hum and computer noise. The software can remove both high frequency and low frequency problems simultaneously without adversely affecting the source material.

The plug-in features a familiar five-band EQ interface and an "Extract" mode which can create a noise profile from sources that contain signal, as well as a flexible "Adaptive" mode. Real-time operation means parameters can be fine tuned and changes heard as they are made.

Monitoring provides a choice of either listening to the audio after Z-Noise processing or the noise being removed. A choice can also be made between increased frequency resolution or improved time resolution, or a combination of the two.
- 5-Band noise profile EQ
- Enhanced low-frequency resolution and time sensitivity
- Extract mode creates noise profile from sources containing signal and noise
- Adaptive dynamic detection for noise that changes over time
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native and StudioRack Native only

In the Box Bundle Items AudioTrack - Multi-Processor Plug-In (Native/SoundGrid, Download) vtubtywqzvfccxsrareczs C1 Compressor - Dynamics Plug-In (Native/SoundGrid, Download) C4 Multiband Compressor - Dynamics Processor Plug-In (TDM/Native/SoundGrid, Download) Center - Spatial Imaging Adjustment Plug-In (Native/SoundGrid, Download) DeEsser - Sibilance Removal Plug-In (Native/SoundGrid, Download) Doppler - Doppler Effect Plug-In (Native/SoundGrid, Download) Doubler - Double Tracking Effects Plug-In (Native/SoundGrid, Download) Enigma - Multi-Effects Modulation Plug-In (Native/SoundGrid, Download) GTR3 - Guitar Amps, Stomp Boxes, Tuner Plug-Ins Bundle (Native/SoundGrid, Download) H-Comp Hybrid Compressor - Dynamics Plug-In (Native/SoundGrid, Download) H-Delay Hybrid Delay Delay Plug-In (Native/SoundGrid, Download) IR-L Convolution Reverb - Stereo Reverb Plug-In (Native/SoundGrid, Download) L1 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download) L2 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download) L3 Multimaximizer - Multi-Band Limiter Plug-In (Native/SoundGrid, Download) Linear Phase EQ - Mastering Equalizer Plug-In (Native/SoundGrid, Download) Linear Phase Multiband Compressor - Multiband Compression Plug-In (TDM/Native/SoundGrid, Download) MaxxBass - Bass Enhancement Plug-In (Native/SoundGrid, Download) MaxxVolume - Dynamics Plug-In (Native/SoundGrid, Download) MetaFlanger - Flanger Plug-In (Native/SoundGrid, Download) MondoMod - Modulation Plug-In (Native/SoundGrid, Download) Morphoder - Vocoder Plug-In (TDM/Native/SoundGrid, Download) MV2 - Compressor Plug-In (Native/SoundGrid, Download) OneKnob Driver - Overdrive/Distortion Plug-In (Native/SoundGrid, Download) OneKnob Filter - Sweepable Filter Plug-In (Native/SoundGrid, Download) PAZ Analyzer - Audio Signal Analyzer Plug-In (Native/SoundGrid, Download) PS22 Stereo Maker - Spatial Enhancement Plug-In (Native/SoundGrid, Download) vtubtywqzvfccxsrareczs PuigTec EQs - Program and Midrange EQ Plug-Ins (Native/SoundGrid, Download) Q10 Equalizer - Paragraphic EQ Plug-In (TDM/Native/SoundGrid, Download) Q-Clone - EQ Preset Modeling Plug-In (Native/SoundGrid, Download) Renaissance Axx - Dynamics Plug-In (Native/SoundGrid, Download) Renaissance Bass - Bass Enhancement Plug-In (Native/SoundGrid, Download) Renaissance Channel - Channel Strip Plug-In (Native/SoundGri

Upload User Manual

Have you got an user manual for the Waves Diamond - Comprehensive Audio Processing Plug-Ins Bundle in electronic form? Please send it to us and help us expand our library of instruction manuals. Thank you, too, on behalf of other users.

To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.

Please enter here the link to the user manual of this product:

OR

Enter here the file with the user manual of this product from your computer/phone:
(60MB max; Permitted formats: PDF)

0%

Technical parameters

AudioTrack - Multi-Processor Plug-In (Native/SoundGrid, Download)

System Requirements

Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats

Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats

C1 Compressor - Dynamics Plug-In (Native/SoundGrid, Download)

System Requirements

C4 Multiband Compressor - Dynamics Processor Plug-In (TDM/Native/SoundGrid, Download)

System Requirements

Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.2
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats
TDM use requires 10.3.8 to 10.3.10

PC
Intel Core 2 Duo 2GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats
TDM use requires 10.3.8 to 10.3.10

Center - Spatial Imaging Adjustment Plug-In (Native/SoundGrid, Download)

System Requirements

DeEsser - Sibilance Removal Plug-In (Native/SoundGrid, Download)

System Requirements

Doppler - Doppler Effect Plug-In (Native/SoundGrid, Download)

System Requirements

Doubler - Double Tracking Effects Plug-In (Native/SoundGrid, Download)

System Requirements

Enigma - Multi-Effects Modulation Plug-In (Native/SoundGrid, Download)

System Requirements

GTR3 - Guitar Amps, Stomp Boxes, Tuner Plug-Ins Bundle (Native/SoundGrid, Download)

System Requirements

H-Comp Hybrid Compressor - Dynamics Plug-In (Native/SoundGrid, Download)

System Requirements

H-Delay Hybrid Delay Delay Plug-In (Native/SoundGrid, Download)

System Requirements

macOS 10.10.5 to 10.12.5
Intel Core i5, i7, Xeon
8 GB RAM
8 GB free hard drive space on system drive
1024 x 768 minimum screen resolution (1280 x 1024 or 1600 x 1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, AudioSuite, VST, or VST3 formats
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
Intel Core i3, i5, i7, and Xeon; AMD Quad-Core
4 GB RAM
8 GB free hard drive space on system drive
1024 x 768 minimum screen resolution (1280 x 1024 or 1600 x 1024 recommended)
For Native plug-in use, host software that supports AAX Native, AudioSuite, VST, or VST3 formats
Support for Visually Impaired Users
macOS Sierra 10.12.4
VoiceOver Utility enabled
Pro Tools 12.7
Logic 10.3.1
Note: Preset management via the WaveSystem Toolbar is currently not supported

IR-L Convolution Reverb - Stereo Reverb Plug-In (Native/SoundGrid, Download)

System Requirements

Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/AudioSuite, or VST formats

PC
Intel Core 2 Duo 2 GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/AudioSuite, or VST formats

L1 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download)

System Requirements

L2 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download)

System Requirements

L3 Multimaximizer - Multi-Band Limiter Plug-In (Native/SoundGrid, Download)

System Requirements

Linear Phase EQ - Mastering Equalizer Plug-In (Native/SoundGrid, Download)

System Requirements

Linear Phase Multiband Compressor - Multiband Compression Plug-In (TDM/Native/SoundGrid, Download)

System Requirements

Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10
(Avid VENUE not supported)

PC
Intel Core 2 Duo 2 GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10
(Avid VENUE not supported)

MaxxBass - Bass Enhancement Plug-In (Native/SoundGrid, Download)

System Requirements

MaxxVolume - Dynamics Plug-In (Native/SoundGrid, Download)

System Requirements

MetaFlanger - Flanger Plug-In (Native/SoundGrid, Download)

System Requirements

MondoMod - Modulation Plug-In (Native/SoundGrid, Download)

System Requirements

Morphoder - Vocoder Plug-In (TDM/Native/SoundGrid, Download)

System Requirements

MV2 - Compressor Plug-In (Native/SoundGrid, Download)

System Requirements

OneKnob Driver - Overdrive/Distortion Plug-In (Native/SoundGrid, Download)

System Requirements

Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.2
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/AudioSuite, or VST formats

PC
Intel Core 2 Duo 2GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/AudioSuite, or VST formats

OneKnob Filter - Sweepable Filter Plug-In (Native/SoundGrid, Download)

System Requirements

PAZ Analyzer - Audio Signal Analyzer Plug-In (Native/SoundGrid, Download)

System Requirements

PS22 Stereo Maker - Spatial Enhancement Plug-In (Native/SoundGrid, Download)

System Requirements

PuigTec EQs - Program and Midrange EQ Plug-Ins (Native/SoundGrid, Download)

System Requirements

Q10 Equalizer - Paragraphic EQ Plug-In (TDM/Native/SoundGrid, Download)

System Requirements

Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10

PC
Intel Core 2 Duo 2 GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10

Q-Clone - EQ Preset Modeling Plug-In (Native/SoundGrid, Download)

System Requirements

Renaissance Axx - Dynamics Plug-In (Native/SoundGrid, Download)

System Requirements

Renaissance Bass - Bass Enhancement Plug-In (Native/SoundGrid, Download)

System Requirements

Renaissance Channel - Channel Strip Plug-In (Native/SoundGrid, Download)

System Requirements

Renaissance Compressor - Dynamics Plug-In (Native/SoundGrid, Download)

System Requirements

Renaissance DeEsser Channel Strip Plug-In (Native/SoundGrid, Download)

System Requirements

macOS X 10.10.5 to 10.12.5
Intel Core i5, i7, Xeon
8 GB RAM
8 GB free hard drive space on system drive
1024 x 768 minimum screen resolution (1280 x 1024 or 1600 x 1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, AudioSuite, VST, or VST3 formats
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
Intel Core i3, i5, i7, and Xeon; AMD Quad-Core
4 GB RAM
8 GB free hard drive space on system drive
1024 x 768 minimum screen resolution (1280 x 1024 or 1600 x 1024 recommended)
For Native plug-in use, host software that supports AAX Native, AudioSuite, VST, or VST3 formats
Support for Visually Impaired Users
macOS X Sierra 10.12.4
VoiceOver Utility enabled
Pro Tools 12.7
Logic 10.3.1
Note: Preset management via the WaveSystem Toolbar is currently not supported

Renaissance Equalizer - EQ Plug-In (Native/SoundGrid, Download)

System Requirements

Renaissance Reverb - Classic Reverb Plug-In (Native/SoundGrid, Download)

System Requirements

Renaissance Vox - Dynamics Processor Plug-In (Native/SoundGrid, Download)

System Requirements

S1 Stereo Imager - Stereo Enhancement Plug-In (Native/SoundGrid, Download)

System Requirements

SoundShifter - Pitch and Time-Shift Plug-In (Native/SoundGrid, Download)

System Requirements

Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats

PC
Intel Core 2 Duo 2 GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats

SuperTap - Analog Style Delay Plug-In (Native/SoundGrid, Download)

System Requirements

Trans-X - Transient Modifying Plug-In (Native/SoundGrid, Download)

System Requirements

TrueVerb - Real Room Simulation Plug-In (Native/SoundGrid, Download)

System Requirements

UltraPitch - Harmonizing Plug-In (Native/SoundGrid, Download)

System Requirements

V-Comp - Vintage Hardware Compressor Plug-In (Native/SoundGrid, Download)

System Requirements

V-EQ3 - Vintage Style EQ Plug-In (Native/SoundGrid, Download)

System Requirements

V-EQ4 - Vintage Style EQ Plug-In (Native/SoundGrid, Download)

System Requirements

Vitamin Sonic Enhancer - Multiband Harmonic Enhancer Plug-In (Native/SoundGrid, Download)

System Requirements

Waves Tune LT - Pitch Transforming Plug-In (Native, Download)

System Requirements

WLM Plus Loudness Meter - Precision Metering Plug-In (Native/SoundGrid, Download)

System Requirements

Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/AudioSuite, or VST formats

PC
Intel Core 2 Duo 2GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/AudioSuite, or VST formats

X-Click - Transient Noise Removal Plug-In (Native/SoundGrid, Download)

System Requirements

X-Crackle - Surface Noise and Crackle Removal Plug-In (Native/SoundGrid, Download)

System Requirements

X-Hum - Hum Removal Plug-In (Native/SoundGrid, Download)

System Requirements

X-Noise - Steady-State Noise Removal Plug-In (Native/SoundGrid, Download)

System Requirements

Z-Noise - Noise Reduction Plug-In (Native/SoundGrid, Download)

System Requirements

Rating

90% users recommend this product to others. And what about you?

This product has already been rated by 36 owners. Add your rating and experience with the product.

Discussion

Ask our technicians if you have a problem with your settings, or if anything is unclear in the user manual you have downloaded. You can make use of our moderated discussion. The discussion is public and helps other users of our website who may be encountering similar problems.

The discussion is empty - enter the first post

Post a new topic / query / comment:

Items marked with * are required.

Your name *:

E-mail :

Subject *:

Message *:

Your email address will not be displayed. Do not forget to fill it in if you want to receive a reply to your enquiry/contribution.
Processing of personal data in accordance with GDPR

Request for user manual

You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:

I’m looking for a manual / Request for manual

Current requests for instruction manuals:

Milano Carbon Fiber Tripod with B1 Head...

c.PLASMA X LARGE SIN/SION user manual-pdf centrotherm PECVD platform c.PLASMA...

Streamlight Macrostream...

AOC curved gaming monitor...

User manual for Bowens ML500 Flash head ...

Discussion

Latest contributions to the discussion:

SQ 7 PDF
Name: Yash Deshmukh
Allen & Heath SQ-7 48-Channel 36-Bus
I want to download PDF ...

Business Card Studio 10
Name: Yvon
Summitsoft Business Card Studio Pro
Business Card Studio 10 will not print. Window 11 My printer will print anything else....

REQUESTING FOR QUOTE
Name: ALBERT GABRIEL
Auray X-Style Piano Bench & Double
RFQ 919 S/ N DESCRIPTION UNIT QTY 1 KEYBOARD YAMAHA MODEL PSR-S750 61-KEY DIGITAL WORKSTATION PCS 1 2 AURAY DOUBLE-X KEYBOARD STAND WITH PULL LOCK MFR #KSPL-2X PCS 1 3 YAMAHA YBA-611 ARTISTE SERIES KEYBOARD BAG FOR 61-KEY PORTABLE KEYBOARDS PCS 1 4 AURAY FP-P1...

Leatherman Micra
Name: Rebecca Burgess
Leatherman Micra Tool with Box
Please send me a user's manual for Leatherman Micra...

total cost of Casio CTK 3500 61 key manual
Name: Eric Sensiba
Casio CTK-3500 61-Key Keyboard with Touch
What is the total cost for a Casio CTK 3500 61 key Electronic keyboard manual including taxes and shipping t85739?...

PDF User Manuals

We regularly supplement and update our library. Latest instruction manuals added for download:

Detail - Neewer RF550D LED Macro Ring Light
https://www.search-manual.com/ upload/ neewer-rf550d-led-macro-ring-light-321086-user-manual.pdf

Detail - Tiffen Q-13 Color Separation Guide
https://www.search-manual.com/ upload/ tiffen-q-13-color-separation-guide-125593-user-manual.pdf

Detail - Sony Cyber-shot DSC-HX99 Digital Camera Deluxe
https://www.search-manual.com/ upload/ sony-cyber-shot-dsc-hx99-digital-camera-deluxe-kit-369789-user-manual.pdf

Detail - Bogen Communications SBA225 - 25 Room
https://www.search-manual.com/ upload/ bogen-communications-sba225-25-room-selector-switchboard-panel-62732-user-manual.pdf

Detail - Kraken Sports NR-1000 800-Lumen Dive Light
https://www.search-manual.com/ upload/ kraken-sports-nr-1000-800-lumen-dive-light-349586-user-manual.pdf

What our users say about us:

Peter Morgan: "Thanks for this website! With help from your instructions I’ve got my dishwasher working again."

Nick Jackson: "Your site’s been a massive help because the user manual didn’t come with the product. Thanks a lot."

Leslie Scott: "I finally found the user's guide with you that I couldn’t find anywhere else! Totally happy!"

Take a look through our user manuals in our on-line library, with instruction manuals and service handbooks downloadable in PDF format. Our instructions database is constantly updated and supplemented with new products. Looking for instruction manuals? Ask us!
SEARCH-MANUAL.com
Sitemap.xml

User manualWaves Diamond - Comprehensive Audio Processing

User Manual for Waves Diamond - Comprehensive Audio Processing Plug-Ins Bundle

Product description

Upload User Manual

Technical parameters

Rating

Discussion

What our users say about us:

Peter Morgan: "Thanks for this website! With help from your instructions I’ve got my dishwasher working again."

Nick Jackson: "Your site’s been a massive help because the user manual didn’t come with the product. Thanks a lot."

Leslie Scott: "I finally found the user's guide with you that I couldn’t find anywhere else! Totally happy!"

User manual
Waves Diamond - Comprehensive Audio Processing