User Manual for Waves Sound Design Suite - Sound Design Post Production Plug-Ins Bundle Click to enlarge the picture
Contents of the user manual for the Waves Sound Design Suite - Sound
- Product category: Virtual Processor Plug-Ins Waves
- Brand: Waves
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Waves Virtual Processor Plug-Ins
|
User manual for the Waves Sound Design Suite - Sound contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Waves product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Waves user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Waves product will considerably shorten its lifespan!
|
Product description The Sound Design Suite from Waves includes over thirty plug-ins aimed at providing processing for sound design for film, TV, and game sound design. The included items were selected by Waves and sound designers Scott Martin Gershin and Charles Deenen and feature dynamics, EQ, pitch shifting, level maximization, and sub-bass plug-ins. In addition to the items listed below, the bundle includes the L3 Ultramaximizer and the L3-LL Ultramaximizer, low-latency multiband peak limiter/level maximizing plug-ins. - C4 Multiband Compressor - Dynamics Processor Plug-In (TDM/Native/SoundGrid, Download) C4 Multiband from Waves is a multiband dynamics processor plug-in that features four bands of up and down expansion, limiting, and compression, along with dynamic and standard EQ. By combining the technologies from the Renaissance Compressor and the C1 Parametric Compander, the plug-in provides comprehensive and transparent control over the contours of a mix.
- Multiband compressor plug-in
- Sculpt vocal frequency and dynamic response with pinpoint precision
- Control, compress, and accentuate different parts of drum kits
- Shape mixes dynamically using frequency-based compression and expansion
- Double precision bit resolution processing
- Up to 24-bit/192 kHz resolution (Native) and up to 96 kHz (TDM)*
*Accel card required for 96 kHz operation - Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- DeEsser - Sibilance Removal Plug-In (Native/SoundGrid, Download) DeEsser from Waves is a plug-in used to reduce excessive sibilance ("ess" and "shh" sounds) from vocal tracks. Inspired by vintage gear for precision de-essing and high frequency limiting, the plug-in delivers smooth and natural output without complicated adjustments.
- Wide-band or split compression modes
- Audio (source) or side-chain monitoring
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Doppler - Doppler Effect Plug-In (Native/SoundGrid, Download) Doppler from Waves is a plug-in that produces the sonic effect of a sound source moving towards or away from a listener, simulating the classic Doppler effect. The plug-in allows for control of the frequency change, speed, and distance from the sonic source with pinpoint accuracy.
- Auto-detection or manual triggering
- Creative "click and drag" simplicity
- Energy, manual, continuous cycling and one-shot modes
- Reverb with time and brightness controls
- Up to 24-bit/96 kHz resolution (Native) and up to 48 kHz (TDM)
- Mono-to-stereo and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Doubler - Double Tracking Effects Plug-In (Native/SoundGrid, Download) Doubler from Waves is a plug-in that can automatically create a double-track effect, especially useful for vocals. Using adjustable delay and pitch modulation, the plug-in adds a rich texture on vocals, but works equally well on polyphonic instruments and full mixes.
- Double-tracking/chorus plug-in
- Create '80s harmonizer and pitch detune effect
- Two- and four-voice components
- Double vocal parts automatically
- Add flam-like effects to drums
- Up to 24-bit/192 kHz resolution (Native) and 96 kHz (TDM)*
*Accel card required for 96 kHz operation with only 2 voices mono or m/s available at 96 kHz - Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Enigma - Multi-Effects Modulation Plug-In (Native/SoundGrid, Download) Enigma from Waves is a plug-in that allows for twisting, bending, and mangling of sounds with effects that go beyond phasing and flanging. The software uses a combination of filters, short delay feedback loops, reverb, LFO modulation, and more to create radical, and unusual sonic textures.
- Three plug-in modules - notch, modulator, and feedback
- Up to 24-bit/192 kHz resolution
- Mono-to-stero and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- GTR3 - Guitar Amps, Stomp Boxes, Tuner Plug-Ins Bundle (Native/SoundGrid, Download) GTR3 from Waves packages together four plug-ins that are only available in this and other select bundles. GTR3 Amps delivers vintage and contemporary amps, inspired by amplifiers from Fender Marshall, Mesa/Boogie, Vox and others. From distortion, doubler and delay to flanger, phaser, fuzz and more, GTR3 Stomps provides all the processors needed to customize guitar tone. It includes features like sync-to-host BPM and real-time MIDI control.
GTR ToolRack features virtual guitar amps, cabs and effects and runs as a plug-in or as a standalone application for real-time processing. The latter allows the performer to plug their guitar straight into a laptop and process the sound live on stage, using a MIDI foot controller for real-time preset selection and sound manipulation. Each instance of GTR3 ToolRack holds up to six GTR Stomps, two GTR Amps, and the GTR Tuner, a chromatic tuner that can be set to standard, alternate, and chromatic tunings. Note: GTR3 ToolRack is a Native application and has only partial SoundGrid compatibility. GTR3 Tuner is not available for Avid VENUE. - GTR3 Amps
-
- 25 modeled amps guitar and 7 bass amps
- Clean, drive and high gain guitar amps
- Custom amps by Neil Citron
- Up to 24-bit/96 kHz resolution (for TDM use, Accel card required for 96 kHz operation, with no stereo available at that rate)
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- GTR3 Stomps
-
- Drag and drop effects into the virtual pedal board
- 26 state-of-the-art effects
- Chain up to six effects per track
- Up to 24-bit/96 kHz resolution (for TDM use, Accel card required for 96 kHz operation, with OverDrive stereo only available up to 48 kHz)
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- GTR3 ToolRack
-
- 32 amps and 29 cabs
- Multiple mics and mic settings
- Standalone, no DAW required
- Up to 24-bit/96 kHz resolution (Native and SoundGrid only)
- Mono-to-stereo and stereo components
- SoundGrid license compatible with StudioRack Native, StudioRack SoundGrid and eMotion ST Mixer
- GTR3 Tuner
-
- Precision accuracy
- Chromatic tuning
- One-click inline accessibility
- Up to 24-bit/96 kHz resolution
- Mono component only
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- H-Comp Hybrid Compressor - Dynamics Plug-In (Native/SoundGrid, Download) H-Comp from Waves is a hybrid compressor plug-in that models the behavior of transformer, tube, and transistor circuits, and combines them with the repeatability of software. The compressor's release performance is specifically modeled on the corresponding analog behavior, while a wet/dry control allows for parallel compression.
Other features include multiple sync functions, an output limiter, and access to the compressor circuitry via an external side-chain for additional compression control. - Hybrid compressor plug-in
- Analog modeled release behavior
- Wet/dry mix for easy parallel compression
- Transient pass-through punch control
- BPM-sync release function
- Output limiter/clipper modes
- External side-chain support
- Up to 24-bit/192 kHz resolution*
*For TDM use Accel card required for 192 kHz operation - Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- H-Delay Hybrid Delay Delay Plug-In (Native/SoundGrid, Download) H-Delay from Waves is a hybrid delay plug-in that features old school PCM42-style effects like filtering, flanging, and phasing, along with slap-back echo, ping-pong delay, and tempo-sync with modulation. The plug-in has full MIDI support.
An intuitive interface aids in quickly creating an effect using a comprehensive set of controls and includes a tap tempo pad for manually tapping in a tempo. Internal or host-to sync is also available, and the high- and low-pass filters can be linked. - Up to 3.5 seconds delay time
- Variable pitch delay time behavior
- Analog character and LoFi modes
- Infinite feedback support
- LFO-controlled pitch modulation
- Tap Pad for easy delay time setting
- Sync-to-host or manual BPM
- Supports sample rates up to 96 kHz
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- L1 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download) L1 Ultramaximizer from Waves is a plug-in that provides dynamics control for any audio application, from multimedia to mastering. The software features look-ahead peak limiting, level maximization, and high resolution re-quantization, and is known for its transparency and punch.
- Peak limiter/level maximizer plug-in
- Two components: L1 Ultramaximizer and L1 Ultramaximizer+
- IDR (Increased Digital Resolution) dither with noise shaping filter
- Double precision bit resolution processing
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- L2 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download) L2 Ultramaximizer from Waves is a plug-in that provides dynamics control for mixing, mastering, and more. The software features look-ahead brickwall peak limiting, level maximization, and ultra high resolution re-quantization for crystal clear level gain.
- Peak limiter/level maximizer plug-in
- Manual and ARC Automatic Release Control
- IDR (Increased Digital Resolution) with double precision bit re-quantization and dither with 9th-order noise shaping filter
- Double precision bit resolution processing
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- L3 Multimaximizer - Multi-Band Limiter Plug-In (Native/SoundGrid, Download) The L3 Multimaximizer from Waves is a plug-in that performs multi-band peak limiting, delivered in two versions. The Multimaximizer and Ultramaximizer plug-ins both utilize the "Peak Limiting Mixer" (PLMixer) engine, with the only difference being less control provided on the Ultramaximizer.
The plug-in uses linear phase crossover filters to divide the audio spectrum into five bands. The PLMixer then uses psychoacoustic criteria to intelligently decide how much attenuation to apply to each band so that all available headroom is used.
The result is that inter-modulation is minimized and overall loudness is maximized, while brick-wall limiting is still maintained - all while retaining a single master threshold control. With its transparent operation, brick-wall limiting, dithering and noise shaping control, the L3 is able to function as a complete mastering processor. - Multiband peak limiter/level maximizer plug-in
- Linear phase EQ avoids strident highs and delivers punchy lows
- Master and individual ARC Automatic Release Controls
- IDR (Increased Digital Resolution) with double precision bit re-quantization and dither with 9th-order noise shaping filter
- Also includes L3 Ultramaximizer
- Up to 24-bit/96 kHz resolution*
*For TDM use, Accel card required for all sample rates - Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Linear Phase EQ - Mastering Equalizer Plug-In (Native/SoundGrid, Download) The Linear Phase EQ from Waves is a plug-in created with mastering as its main focus. The linear phase filters preserve the original musical balance with absolutely zero phase shift, while providing precise control over the harmonic spectrum.
- Equalizer plug-in for mastering
- Five user-definable bands of EQ with linear phase crossovers
- Lowband and broadband components*
*When using LinEQ Broadband for TDM, stereo not available at 96 kHz - Nine linear phase filter types
- Ideal for acoustic instruments, stereo sources, transient-heavy tracks, and mastering
- Up to 24-bit/96 kHz resolution*
*For TDM use, Accel card required for 96 kHz - Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Linear Phase Multiband Compressor - Multiband Compression Plug-In (TDM/Native/SoundGrid, Download) The Linear Phase Multiband Compressor from Waves is a multiband dynamics plug-in for mixing, mastering, and more. The software utilizes technologies like Adaptive Thresholds, Automatic Makeup Gain, and Finite Response Filters.
The inclusion of linear phase crossovers allows the plug-in to function without any phase-based distortion, and each of the five bands features threshold, gain, range, attack and release controls for transparent multiband compression. - Multiband compressor plug-in for mastering
- Five user-definable bands with linear phase crossovers
- ARC Automatic Release Control
- Ideal for mastering and other high-precision applications
- Up to 24-bit/96 kHz resolution*
*For TDM use, Accel card required for 96 kHz operation - Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- LoAir - Subharmonic Synthesizer Plug-In (Native/SoundGrid, Download) LoAIR from Waves is a plug-in for generating and enhancing subharmonic content in music or sound effects. The process adds heft and depth to audio material, while also allowing the shaping of the ultra low-end with adjustable frequency and low-pass filter controls. Additionally, the software can process polyphonic content in a manner that enhances the low end in a natural and musical way, as well as create an LFE track from stereo or 5.0 sources.
- Enhances existing subharmonics
- Includes unique low-pass filter
- Creates 5.1 mixes from 5.0 mixes (including 5.0 effect libraries and 5.0 movies)
- Increases subs on existing 5.1 mixes and sound effects
- Adds deep lows to sub synths, big basses and kicks in music mixes
- Optimizes PA subs in live shows
- Processes polyphonic source material
- Up to 24-bit/192 kHz resolution (Native) and 96 kHz (TDM)*
*For TDM use, Accel card required for 88.2 kHz to 96 kHz operation - Mono, stereo, 5.0, 5.1 components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- MetaFlanger - Flanger Plug-In (Native/SoundGrid, Download) MetaFlanger from Waves is a plug-in for emulating the sound of great vintage tape flanging and phaser. The software is capable of generating anything from gentle choruses and dual-delay flanging sounds, to sharp phasing and extreme jet sweeps.
- Flanging, phasing, chorusing, and more
- Works well as a vocal effect
- Tape delay emulation switch
- LFO depth and waveform display
- Modulation Stop switch to freeze the LFO
- Extensive presets including emulations of vintage gear
- Up to 24-bit/192 kHz resolution
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- MondoMod - Modulation Plug-In (Native/SoundGrid, Download) MondoMod from Waves is a modulation plug-in for creating unique sonic textures ranging from tranquil to turbulent. The software uses a combination of linked AM (Amplitude Modulation), FM (Frequency Modulation) and rotation modulators. The software features five selectable waveforms for the LFO, and the overall tempo of the modulators can be synchronized to the host software.
- Three main modules: AM for tremolo, FM for vibrato and rotation for panning
- LFO with five selectable waveforms
- Up to 24-bit/192 kHz resolution
- Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Morphoder - Vocoder Plug-In (TDM/Native/SoundGrid, Download) The Morphoder from Waves is a plug-in that redefines the sound of the classic vocoder. The plug-in allows for combining two distinct audio signals to create new and perhaps strange sonic combinations, with unmatched clarity and definition.
At the heart of the plug-in is an eight-voice synthesizer with formant control and a modulator with a Linear Phase EQ. MIDI control is also available. A four-octave virtual keyboard provides note input directly from within the plug-in. - 8-voice stereo synthesizer
- Modulator with Linear Phase EQ
- Up to 24-bit/96 kHz resolution*
*For TDM use, Accel card required for 96 kHz operation - Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- PAZ Analyzer - Audio Signal Analyzer Plug-In (Native/SoundGrid, Download) The PAZ Analyzer from Waves is an audio analysis plug-in that generates a comprehensive real-time visual representation of the audio's stereo positioning, frequency spread, and peak/RMS levels. It shows the peak and RMS displays with individually re-settable peak hold values, and provides optional resolution in 10 Hz steps for precise analysis below 250 Hz. The analysis graphic output can be saved as a text file.
- Audio analysis tool with three plug-in components - position, frequency and meter
- L/R peak and RMS analysis modes and displays, with individually re-settable peak hold values
- Optional resolution in 10 Hz steps for precise analysis below 250 Hz
- Real-time vector display with zoom
- Results can be saved as text file
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- PS22 Stereo Maker - Spatial Enhancement Plug-In (Native/SoundGrid, Download) The PS22 Stereo Maker from Waves is ideal for revitalizing old recordings, as well as sound effects, guitar leads, and more. The software provides mono-to-stereo emulation, can be used to enhance individual tracks, or for re-balancing the spatial imaging of a stereo mix.
- Psycho-acoustic spatial enhancement and phase-compensation
- For enhancing individual tracks, or re-balancing the spatial imaging of stereo mixes
- Retains mono compatibility
- Preserves original frequency response
- Left/right or MS meter monitoring
- Up to 24-bit/192kHz resolution
- Mono-to-stereo and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Q10 Equalizer - Paragraphic EQ Plug-In (TDM/Native/SoundGrid, Download) The Q10 from Waves is a paragraphic EQ plug-in that features up to ten frequency bands within seven components. The software delivers precision equalization for mixing and mastering alike, with each band having the same extended frequency range, and the ability to narrow the bandwidth (Q) for more surgical tasks.
With presets that cover a wide range of applications and advanced noise shaping, the software provides the tools for both creating special effects and spectral modifications that range from subtle to extreme. The plug-in includes Native, SoundGrid and TDM licenses. - Seven plug-in components - 1, 2, 3, 4, 6, 8 and 10 bands
- Separate or linked processing and parameter control
- Advanced noise-shaping for optimum fidelity
- Presets for multimedia, pseudo-stereo, band limiting, comb filtering, crossovers, hum removal, and more
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Renaissance Axx - Dynamics Plug-In (Native/SoundGrid, Download) The Renaissance Axx from Waves is a dynamics plug-in engineered especially for guitar and bass. Settings can be dialed in very easily via a three-parameter interface that includes a fixed ratio curve, automatic release value, and an output limiter to prevent clipping.
- Easy-to-use compressor plug-in
- Ideal for guitar and bass
- Streamlined 3 parameter control
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Renaissance Bass - Bass Enhancement Plug-In (Native/SoundGrid, Download) The Renaissance Bass from Waves is a bass enhancement plug-in featuring the company's MaxxBass psycho-acoustic technology. Tightening up the bass component of mix, or any material for that matter, has never been easier, while at the same time providing the ability to extend the perceived bass depth by up to 1.5 octaves without stressing the speaker system.
- Bigger, tighter bass from any system
- Extends perceived bass response by up to 1.5 octaves
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Renaissance Compressor - Dynamics Plug-In (Native/SoundGrid, Download) The Renaissance Compressor from Waves is a compressor plug-in that features two compression modes: vintage opto and modern electro. Featuring a streamlined interface, the plug-in utilizes technologies from both the company's C1 Parametric Compander, along with the L1 Ultramaximizer.
- Vintage opto and modern electro compression modes
- Internal brickwall limiting for clip-free output
- ARC (Auto Release Control) for increased RMS levels
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Renaissance Equalizer - EQ Plug-In (Native/SoundGrid, Download) The Renaissance Equalizer from Waves is a paragraphic EQ plug-in that features real-time EQ graphing, vintage-modeled filter curves, and extended internal headroom.
- 2, 4, and 6 band components
- Filter-curves based on vintage analog equalizers
- Up to 24-bit/192 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- S1 Stereo Imager - Stereo Enhancement Plug-In (Native/SoundGrid, Download) S1 Stereo Imager from Waves is a plug-in that provides the tools to manipulate the spatial imaging of audio material. Using psycho-acoustic techniques, the software can enhance and alter stereo separation using a choice of three components. It can, among other things, make the stereo field wider or narrower, place objects outside of the speakers, or compensate for a "lopsided" image.
- Three components - Shuffler, Imager, and MS Matrix
- Left/Right and M/S input modes and metering
- Up to 24-bit/192 kHz resolution
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- SoundShifter - Pitch and Time-Shift Plug-In (Native/SoundGrid, Download) SoundShifter from Waves is a three-component plug-in that delivers pitch or time shifting without losing the punch, groove and transients of the original source material. The plug-in allows for changing key, changing tempo, changing duration, and manipulating the time-pitch continuum with accuracy and clarity.
- Parametric, graphic, and real-time components
- Punchy, smooth, transient, and sync modes
- Multiple link, display, and control options
- Time, tempo, bars, samples, SMPTE, feet and frames, pitch, interval, and frequency controls
- Mono and stereo components
- Up to 24-bit 96 kHz resolution
- SoundGrid license compatible with MultiRack Native and StudioRack Native only
- SuperTap - Analog Style Delay Plug-In (Native/SoundGrid, Download) SuperTap from Waves is a delay plug-in inspired by the sound and legacy of analog tape. Featuring extensive modulation, panning, and filter options, the software delivers analog style with digital precision. Tempo entry can be achieved automatically using the sync to host tempo functionality, or by using the Tap-Pad feature for tapping in a tempo setting.
- Tap-Pad for tempo tapping or pattern switching
- Global LFO modulation and two feedback modes
- Spatial positioning vector display
- Up to 24-bit/192 kHz resolution (Native) and up to 96 kHz (TDM)*
*Accel card required for 96 kHz operation - Mono, mono-to-stereo, and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- Trans-X - Transient Modifying Plug-In (Native/SoundGrid, Download) TransX from Waves is a processor plug-in that modifies the shape of transients, either sharpening or softening the edges. Use of the software allows for breathing life into dull sounding drum loops, accentuating or attenuating instrumental attacks, and modifying room acoustics. The plug-in can also highlight sustains and can be used on individual tracks or, with judicious use, on complete mixes.
- Ideal for drum tracks and loops
- Adds punch, softens edges, highlights sustain
- Multi (4-band) and Wide (wide-band) components
- Multi features individual range and sensitivity for each band
- Up to 24-bit/192 kHz resolution*
*When using TDM, Trans-X Multi available up to 48 kHz only - Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- UltraPitch - Harmonizing Plug-In (Native/SoundGrid, Download) UltraPitch from Waves is a plug-in designed for achieving thick stereo chorusing, doubling, parallel harmonization, vocal slap back and spread effects, and much more. Using three modules it's possible to transpose, harmonize, modulate, and transform any sound. Multiple factory presets, including classic setups, are conveniently available.
- Three plug-in modules - shift, 3-voice and 6-voice
- Pitch detector and voice character graphs
- Random asynchronicity using animation amount control
- Linked or free formant correction curves
- Up to 24-bit/96 kHz resolution (Native) and up to 48 kHz (TDM)
- Mono and mono to stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- V-Comp - Vintage Hardware Compressor Plug-In (Native/SoundGrid, Download) V-Comp from Waves is a dynamics plug-in that uses time constants and a fixed nominal output gain to recreate the famous output-bus sound signature of a vintage 2254 hardware compressor. The plug-in is very responsive, with only a little gain reduction needed to glue a mix together.
- Modeled vintage compressor plug-in
- All-in-one compression, limiting and de-essing
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- V-EQ3 - Vintage Style EQ Plug-In (Native/SoundGrid, Download) The V-EQ3 from Waves is a three-band EQ plug-in modeled after the 1066 and 1073 console modules, two of the most sought after EQs. It features the same classic frequency cutoff points as the originals, along with a variable high-pass filter.
- Modeled vintage equalizer plug-in
- Based on the Neve 1066 and 1073 modules
- High pass, low-frequency shelf, mid-frequency bell and high-frequency shelf filters
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
- V-EQ4 - Vintage Style EQ Plug-In (Native/SoundGrid, Download) The V-EQ4 from Waves is a four-band EQ plug-in modeled after the 1081 console module and features detailed high frequency boosts, plus high-pass and low-pass filters. The software conveys the vintage character of the original hardware while simultaneously delivering modern digital usability.
- Modeled vintage equalizer plug-in
- Based on the Neve 1081 modules
- Smooth, responsive performance
- Up to 24-bit/96 kHz resolution
- Mono and stereo components
- SoundGrid license compatible with MultiRack Native, StudioRack Native, MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST Mixer
In the Box Bundle Items C4 Multiband Compressor - Dynamics Processor Plug-In (TDM/Native/SoundGrid, Download) sxzsfdyuvrsdvxvuwuyttwbtrsdwfyc DeEsser - Sibilance Removal Plug-In (Native/SoundGrid, Download) Doppler - Doppler Effect Plug-In (Native/SoundGrid, Download) Doubler - Double Tracking Effects Plug-In (Native/SoundGrid, Download) Enigma - Multi-Effects Modulation Plug-In (Native/SoundGrid, Download) GTR3 - Guitar Amps, Stomp Boxes, Tuner Plug-Ins Bundle (Native/SoundGrid, Download) H-Comp Hybrid Compressor - Dynamics Plug-In (Native/SoundGrid, Download) H-Delay Hybrid Delay Delay Plug-In (Native/SoundGrid, Download) L1 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download) L2 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download) L3 Multimaximizer - Multi-Band Limiter Plug-In (Native/SoundGrid, Download) Linear Phase EQ - Mastering Equalizer Plug-In (Native/SoundGrid, Download) sxzsfdyuvrsdvxvuwuyttwbtrsdwfyc Linear Phase Multiband Compressor - Multiband Compression Plug-In (TDM/Native/SoundGrid, Download) LoAir - Subharmonic Synthesizer Plug-In (Native/SoundGrid, Download) MetaFlanger - Flanger Plug-In (Native/SoundGrid, Download) MondoMod - Modulation Plug-In (Native/SoundGrid, Download) sxzsfdyuvrsdvxvuwuyttwbtrsdwfyc Morphoder - Vocoder Plug-In (TDM/Native/SoundGrid, Download) PAZ Analyzer - Audio Signal Analyzer Plug-In (Native/SoundGrid, Download) PS22 Stereo Maker - Spatial Enhancement Plug-In (Native/SoundGrid, Download) Q10 Equalizer - Paragraphic EQ Plug-In (TDM/Native/SoundGrid, Download) Renaissance Axx - Dynamics Plug-In (Native/SoundGrid, Download) Renaissance Bass - Bass Enhancement Plug-In (Native/SoundGrid, Download) Renaissance Compressor - Dynamics Plug-In (Native/SoundGrid, Download) Renaissance Equalizer - EQ Plug-In (Native/SoundGrid, Download) S1 Stereo Imager - Stereo Enhancement Plug-In (Native/SoundGrid, Download) SoundShifter - Pitch and Time-Shift Plug-In (Native/SoundGrid, Download) SuperTap - Analog Style Delay Plug-In (Native/SoundGrid, Download) Trans-X - Transient Modifying Plug-In (Native/SoundGrid, Download) UltraPitch - Harmonizing Plug-In (Native/SoundGrid, Download) V-Comp - Vintage Hardware Compressor Plug-In (Native/SoundGrid, Download) V-EQ3 - Vintage Style EQ Plug-In (Native/SoundGrid, Download) V-EQ4 - Vintage Style EQ Plug-In (Native/SoundGrid, Download)
Also Includes - L3 Ultramaximizer
- L3-LL Ultramaximizer
Table of Contents
|
Upload User Manual
Have you got an user manual for the Waves Sound Design Suite - Sound Design Post Production Plug-Ins Bundle in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - C4 Multiband Compressor - Dynamics Processor Plug-In (TDM/Native/SoundGrid, Download)
| System Requirements | Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.2
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats
TDM use requires 10.3.8 to 10.3.10
PC
Intel Core 2 Duo 2GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats
TDM use requires 10.3.8 to 10.3.10 | - DeEsser - Sibilance Removal Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Doppler - Doppler Effect Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Doubler - Double Tracking Effects Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Enigma - Multi-Effects Modulation Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - GTR3 - Guitar Amps, Stomp Boxes, Tuner Plug-Ins Bundle (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - H-Comp Hybrid Compressor - Dynamics Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - H-Delay Hybrid Delay Delay Plug-In (Native/SoundGrid, Download)
| System Requirements | macOS 10.10.5 to 10.12.5
Intel Core i5, i7, Xeon
8 GB RAM
8 GB free hard drive space on system drive
1024 x 768 minimum screen resolution (1280 x 1024 or 1600 x 1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, AudioSuite, VST, or VST3 formats
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
Intel Core i3, i5, i7, and Xeon; AMD Quad-Core
4 GB RAM
8 GB free hard drive space on system drive
1024 x 768 minimum screen resolution (1280 x 1024 or 1600 x 1024 recommended)
For Native plug-in use, host software that supports AAX Native, AudioSuite, VST, or VST3 formats
Support for Visually Impaired Users
macOS Sierra 10.12.4
VoiceOver Utility enabled
Pro Tools 12.7
Logic 10.3.1
Note: Preset management via the WaveSystem Toolbar is currently not supported | - L1 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - L2 Ultramaximizer - Loudness Maximizer Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - L3 Multimaximizer - Multi-Band Limiter Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Linear Phase EQ - Mastering Equalizer Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Linear Phase Multiband Compressor - Multiband Compression Plug-In (TDM/Native/SoundGrid, Download)
| System Requirements | Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10
(Avid VENUE not supported)
PC
Intel Core 2 Duo 2 GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10
(Avid VENUE not supported) | - LoAir - Subharmonic Synthesizer Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - MetaFlanger - Flanger Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - MondoMod - Modulation Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Morphoder - Vocoder Plug-In (TDM/Native/SoundGrid, Download)
| System Requirements | Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10
(Avid VENUE not supported)
PC
Intel Core 2 Duo 2 GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10
(Avid VENUE not supported) | - PAZ Analyzer - Audio Signal Analyzer Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - PS22 Stereo Maker - Spatial Enhancement Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Q10 Equalizer - Paragraphic EQ Plug-In (TDM/Native/SoundGrid, Download)
| System Requirements | Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10
PC
Intel Core 2 Duo 2 GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats
TDM use requires Pro Tools 10.3.8 to 10.3.10 | - Renaissance Axx - Dynamics Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Renaissance Bass - Bass Enhancement Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Renaissance Compressor - Dynamics Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Renaissance Equalizer - EQ Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - S1 Stereo Imager - Stereo Enhancement Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - SoundShifter - Pitch and Time-Shift Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Core Duo 2.3 GHz
OS X 10.7 to 10.10.3
4 GB RAM
1024 x 768 screen resolution
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS/Audiosuite, or VST formats
PC
Intel Core 2 Duo 2 GHz
Windows 7 SP1, Windows 8, Windows 8.1
4 GB RAM
1024 x 768 32-bit screen resolution
For Native plug-in use, host software that supports AAX Native, RTAS/Audiosuite, or VST formats | - SuperTap - Analog Style Delay Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - Trans-X - Transient Modifying Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - UltraPitch - Harmonizing Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - V-Comp - Vintage Hardware Compressor Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - V-EQ3 - Vintage Style EQ Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats | - V-EQ4 - Vintage Style EQ Plug-In (Native/SoundGrid, Download)
| System Requirements | Mac
Intel Core i3, i5, i7, Xeon
OS X 10.9.5 to 10.11.4
10.8.5 for Pro Tools 10 only
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
USB displays are not supported as the primary display
For Native plug-in use, host software that supports AAX Native, Audio Units, RTAS, AudioSuite, VST, or VST3 formats
Windows
Intel Core i3, i5, i7, Xeon
Windows 7 SP1, Windows 8.1, Windows 10 (all 64-bit)
4 GB RAM
4 GB free hard drive space
1024x768 minimum screen resolution (1280x1024, 1600x1024 recommended)
For Native plug-in use, host software that supports AAX Native, RTAS, AudioSuite, VST, or VST3 formats |
Rating90% users recommend this product to others. And what about you?
This product has already been rated by 93 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
