|
User Manual for Whirlwind MultiSelector AMP 1 x 4 Amplifier Switcher Click to enlarge the picture
Contents of the user manual for the Whirlwind MultiSelector AMP 1 x 4
- Product category: Effects Pedal Accessories Whirlwind
- Brand: Whirlwind
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Whirlwind Effects Pedal Accessories
|
User manual for the Whirlwind MultiSelector AMP 1 x 4 contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Whirlwind product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Whirlwind user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Whirlwind product will considerably shorten its lifespan!
|
Product description The MultiSelector AMP 1 x 4 Amplifier Switcher from Whirlwind is a unidirectional 1-to-4 instrument amplifier switcher. This one-space rack unit has a single input that can be fed to up to 4 outputs simultaneously, with totally silent switching and complete ground isolation between amplifiers.
The input is electronically buffered with an input impedance of 1 MΩ, delivering pristine frequency response when used with instruments with passive pickups. The signal passes through the MultiSelector AMP Switcher transparently with no coloration. The digitally controlled optical switching is completely silent and routes the input to the 4 outputs, any combination of which can be selected at the same time.
All 4 outputs are buffered so you can have multiple amps selected at the same time without encountering ground loop hums and noise. Each output has a ground lift switch and a polarity reverse switch to optimize the sound when using multiple amplifiers. The rear panel contains a 1/4” input jack, 4 unbalanced 1/4” output jacks, and male XLR connector for connecting the remote footswitch (sold separately). The unit is AC powered for ultimate performance and no wall wart. The MultiSelector AMP Switcher is set for 120V operation.
Four momentary switches on the front panel turn the channels on and off, with each active output identified by a blue LED. All 4 outputs of the MultiSelector AMP can be switched on at the same time. A separate green LED indicates connection of the MLTSELAMPR Remote Foot Controller (sold separately). - Multiple amplifier switcher drives up to 4 amplifiers simultaneously
- Single high impedance input provides sonic transparency
- Each output is selected independently on the rack or optional remote
- Totally silent optical switching
- Transformer isolated outputs eliminate ground loops
- Polarity switches compensate for wiring or acoustical phase differences
- AC powered for ultimate performance
In the Box Whirlwind MultiSelector AMP 1 x 4 Amplifier Switcher Limited 2-Year Warranty on Parts & Labor Table of Contents
|
Upload User Manual
Have you got an user manual for the Whirlwind MultiSelector AMP 1 x 4 Amplifier Switcher in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersWhirlwind MLTSELAMP Specs | Insertion Loss | 0.05 dBV at 1 kHz
0 dBV in | | Frequency Response | Main Output: ±0.1 dBv, 50 to 16 kHz | | THD + N | <0.001%, 200 to 20 kHz | | Phase Shift | <5.5°, 50 to 10 kHz | | Noise | All Grounds Lifted: <-100 dBV | | Attenuation | Off Channel: >109 dBV | | Dynamic Range | 117 dB | | Maximum Input/Output Level | 19 dBV | | Input Impedance | 1 MΩ | | Output Impedance | 2 kΩ | | Power Consumption | 11 W, 0.086 A at 120 VAC | | Voltage | AC Dropout: 97 VAC | | Dimensions (W x H x D) | 19.0 x 1.8 x 5.5" (482.6 x 44.5 x 139.7 mm) | | Weight | 6.0 lb (2.7 kg) | | | | Package Weight | 2.555 lb | | Box Dimensions (LxWxH) | 22.0 x 9.5 x 5.0" |
Rating60% users recommend this product to others. And what about you?
This product has already been rated by 09 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
Jumpdrive C20i...
Pacsafe Travel Safe 200...
Narink Pro Food chopper B871 users manual...
manual for: "Battery Charger CG-580"...
Dawnstar Electric Knife Sharpener Model: S858-2 user ...
|
|
