|
User Manual for Xvive Audio Wireless DSLR Interview Setup Click to enlarge the picture
Contents of the user manual for the Xvive Audio Wireless DSLR Interview Setup
- Product category: Wireless Systems Xvive Audio
- Brand: Xvive Audio
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Xvive Audio Wireless Systems
|
User manual for the Xvive Audio Wireless DSLR Interview Setup contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Xvive Audio product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Xvive Audio user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Xvive Audio product will considerably shorten its lifespan!
|
Product description This Kit includes the Xvive Audio U3 plug-on wireless mic transmitter and XLR-equipped wireless receiver, a broadcast-quality handheld omnidirectional dynamic microphone, and a passive 2-channel DSLR XLR adapter. With convenient camera and tripod mounting, easy gain adjustment, reduced handling noise, and a maximum range of 90 feet, this kit is ideal for reporting, interviews, and conferences. Setup is simple and efficient; attach the plug-on transmitter to the microphone's XLR jack, connect the receiver to the DSLR adapter's XLR input, then use the supplied 3.5mm cable to plug the adapter's output into the input of your DSLR. - Xvive Audio U3 2.4 GHz Digital Wireless Microphone System
- Xvive U3 Microphone Wireless System demo by Glenn Delaune
Turn your dynamic microphone into wireless with the U3 2.4 GHz Digital Wireless Microphone System from Xvive Audio. It features a 2.4 GHz wireless band, 20 Hz to 20 kHz frequency response, and less than 5 ms latency. The system works up to a 90' range, and includes two rechargeable batteries with a five-hour life for both receiver and transmitter units. The transmitter plugs into a dynamic microphone or into DI or XLR output gear, and the receiver plugs into a live sound mixer, portable PA system, or a recorder. This system broadcasts on six channels simultaneously, and is suitable for live vocals, presentations, video productions, and houses of worship. - Senal ENG-18RL Broadcast Omnidirectional Dynamic Microphone (Long)
- Xvive U3 Microphone Wireless System demo by Glenn Delaune
The Senal ENG-18RL is a broadcast-quality omnidirectional dynamic microphone. The dynamic capsule picks up sound in a 360° pattern and does not require a battery or phantom power, making it a reliable choice for critical field applications. The microphone's exceptionally low handling noise and resistance to wind noise and vocal plosives make it perfect for professional ENG applications like live reporting, interviews, and press conferences.
At multiple areas inside the microphone, natural rubber with special shock-absorbing properties is bonded to carbon steel rings to isolate the sealed inner shell from the outer shell. This system protects the microphone capsule from impacts and inclement weather, and dissipates kinetic energy, dramatically reducing handling noise and resonance due to rustling and knocking.
The microphone also incorporates multistage wind protection to minimize wind noise and vocal plosives. A mesh grille, acoustic foam, acoustic fabric, and another layer of acoustic foam work to diffuse excess sound pressure from wind and breath. A fixed rigid carbon-steel ring with a unique bullet-shaped design disperses breath to minimize vocal plosives.
The EQ curve is tailored for broadcast use, with a gradual low-frequency roll-off to keep out unwanted rumble, a pronounced midrange to ensure speech intelligibility, and a high-frequency roll-off to eliminate hiss and sibilance distortion. Whether broadcasting on television, AM/FM radio, or over the internet, the ENG-18RL is designed to ensure that dialogue cuts through the mix, and can be broadcast live without EQ adjustment.
The ENG-18RL features a durable aluminum-alloy shaft designed for EMI rejection and reduced internal resonance, with a matte black finish for a professional appearance and minimum light reflection. The mic is also long enough to accommodate a mic flag. - Ideal Choice for Critical Field Applications
- The broadcast-quality omnidirectional dynamic capsule picks up sound in a 360° pattern and does not require a battery or phantom power, making it a reliable choice for critical field applications
- Isolated Inner Shell
- The kinetic isolation system helps protect the microphone capsule and dissipate kinetic energy to dramatically reduce handling noise and resonance. Natural rubber shockmouts are bonded to carbon steel rings to isolate the sealed inner shell from the outer shell
- Diffuses Excess Sound Pressure From Wind and Vocal Plosives
- Multistage wind protection comprises a mesh grille, acoustic foam, a bullet-shaped ring, acoustic fabric, and another layer of acoustic foam to diffuse excess sound pressure from wind and vocal plosives
- Broadcast Live Without EQ Adjustment
- The EQ curve is tailored for broadcast use, with a gradual low-frequency roll-off to keep out unwanted rumble, a pronounced midrange to ensure speech intelligibility, and a high-frequency roll-off to eliminate hiss and sibilance distortion
- Can Accommodate Mic Flag
- The ENG-18RL is long enough to fit a mic flag for show or station identification
UPC: 847628572461 In the Box - U3 2.4 GHz Digital Wireless Microphone System dfazyxwbdwzbeqqrczyxc
- 2 x Rechargeable Batteries
- USB Cable
- Bag
- Limited 1-Year Warranty
- Senal - ENG-18RL Broadcast Omnidirectional Dynamic Microphone (Long)
Table of Contents
|
Upload User Manual
Have you got an user manual for the Xvive Audio Wireless DSLR Interview Setup in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parameters - Xvive Audio U3 2.4 GHz Digital Wireless Microphone System
| Wireless | 2.4 GHz | | Tuning Bandwidth | 2400 to 2483.5 MHz | | Frequency Response | 20 Hz to 20 kHz (-3 dB) | | Latency | <5 ms | | Channels | Up to 6 simultaneous channels | | Range | Up to 90' / 27 m | | Audio | High Resolution 24-bit / 48 kb/s | | Dynamic Range | 110 dB | | SNR | 110 dB | | RF Sensitivity | -88 dBm | | Total Harmonic Distortion | 0.2% | | RF Output Power | 10 mW E.I.R.P. max | | Ports | Transmitter: 1 x XLR male input
1 x USB
Receiver: 1 x XLR female output
1 x USB | | Maximum Input Level | Mic Mode: 2.8 V p-p
Line Mode: 7 V p-p | | Maximum Output Level | 2.8 V p-p | | Gain Adjustment Range | Mic: 0 dB
Line: -10 dB | | Antenna Type | 1/4 Wave Sleeve Dipole, non-removable on transmitter and receiver | | Antenna Impedance | 50 Ohms | | Impedance | Transmitter: 15 kOhms, 1 kHz
Receiver: 470 Ohms, 1 kHz | | Battery | 3.7 V rechargeable Li-ion, 860 mA for transmitter and receiver | | Rechargeable Battery Life | 5 hours | | Operating Temperature | -0.4 to 134.6°F / -18 to 57°C | | Housing | Molded plastic and cast metal | | Dimensions | Transmitter: 1.2 x 1.1 x 3.9" / 3.1 x 2.9 x 9.8 cm
Receiver: 1.2 x 1.1 x 3.9" / 3.1 x 2.9 x 9.8 cm | | Weight | Transmitter: 3.3 oz / 93 g
Receiver: 3.2 oz / 92 g | | | | Box Dimensions (LxWxH) | 6.4 x 4.4 x 2.6" | - Senal ENG-18RL Broadcast Omnidirectional Dynamic Microphone (Long)
| Polar Pattern | Omnidirectional | | Element Type | Dynamic | | Output Connector | 3-Pin XLR Male | | Frequency Response | 50 Hz - 18 kHz | | Output Impedance | 500 Ohms | | Sensitivity | 2.2 mV/Pa | | Case Material | Aluminum | | Dimensions (L x D) | 1.3 x 9.1" / 33.0 x 231.0 mm | | Weight | 4.8 oz / 136 g | | | | Box Dimensions (LxWxH) | 11.1 x 5.1 x 2.6" |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 94 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
pocket quadcopter RIV-YT320...
CYBERPOWERPC GMA6200BSTV2...
FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
...
Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
...
Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f...
|
|
