User manual
Yongnuo YN685 Speedlite Wireless Flash Kit

User Manual for Yongnuo YN685 Speedlite Wireless Flash Kit for Canon Cameras

• Product category: On Camera Flashes Yongnuo
• Brand: Yongnuo
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Yongnuo On Camera Flashes

Product description

• 2 x Yongnuo YN685 Wireless TTL Speedlite for Canon Cameras With a built-in YN-622C radio receiver, the YN685 Wireless TTL Speedlite from Yongnuo offers complete radio slave functionality with both the YN-622C and RF-603/YN-560 radio systems for maximum compatibility with your existing gear. The flash is also compatible with Canon's E-TTL / E-TTL II flash system when mounted to the camera and has a powerful guide number of 197' at ISO 100 and 200mm. Benefiting this power is a wide zoom range which will cover 20-200mm in full frame, and a diffuser for wide angle lenses. It also features full bounce with tilt up to 90° and rotation of 180° to the left or right.
  
  Operation is simplified with a clear LCD screen on the back, a dial, and a selection of buttons. The head also offers a pull-out bounce panel for reflecting some light forward when using the tilt functionality. Full sync options are available as well, with high-speed, 1st & 2nd curtain sync. It runs conveniently on 4 AA batteries, has a recycle time of three seconds at full power, and includes an HV power port for battery packs. Additionally, it has a PC sync port.
  • Compatible with YN-622C, YN-622C-TX, YN560 IV flash, YN560-TX, RF-605, RF-603 III, and RF-603 transmitter systems
  • High-speed sync to 1/8000 second
  • Flash exposure compensation and bracketing in 1/3 EV increments from -3 to +3 EV
  • Manual power output from 1/128 to 1/1
  • Heat protection
  • Sound prompts
  • Custom functions and auto save settings
  • Locking metal foot
• Yongnuo YN-622C-TX E-TTL II Wireless Flash Controller for Canon Control multiple flashes equipped with the YN-622C E-TTL II transceiver with the YN-622C-TX E-TTL II Wireless Flash Controller from Yongnuo. Compatible with Canon E-TTL II cameras, this controller slides directly into the hot shoe and utilizes a 2.4 GHz frequency with a range of 328' to trigger the remote flashes. The controller also has TTL, manual, and multi flash modes available for full creative control. Additionally, it can utilize 7 channels and 3 groups for setting up multiple flash units easily and efficiently.
  
  The YN-622C-TX utilizes an LCD screen to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high speed sync mode will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. A built-in mini-USB port enables firmware updates to be installed, and the device runs on 2 AA batteries.
• Vello Softbox for Portable Flash (Large, 8 x 12") Reduce the harshness of your on-camera flash unit and soften shadows by equipping it with this large Softbox for Portable Flash from Vello, which measures 8 x 12". This convenient modifier produces a soft, almost wrap-around quality of light that is useful in a wide variety of situations, such portraiture, weddings, food, and more. . It also features a foldable inner diffuser for further softening of the light and a reflective silver interior that evenly distributes light while maintaining maximum light output.
  
  Setting up the softbox is simple with an integrated elastic strap with a touch tab fastener that secures around the flash head. Also, it has a strap loop and rubberized mounting tabs that will ensure that the softbox remains securely attached. When not in use, the modifier will fold down flat, and a zippered carrying case is included for travel and storage. UPC: 847628588400
• Watson MX AA NiMH Batteries (8-Pack, 1.2V, 2550mAh) Power various electronics, including photo equipment, flashlights, gaming devices, and more, with this 8-pack of 1.2V MX AA NiMH Batteries from Watson. The Japanese-made cells come pre-charged and ready for use with a capacity of 2550mAh, making them ideal for use in high-drain devices. Thanks to their very low self-discharge rate, they are capable of retaining up to 85% of their capacity after 1 year in storage. The batteries can be recharged up to 500 times before their usable capacity starts to diminish. Additionally, they are durable enough to function in temperatures as low as -4°F. UPC: 847628596856
• Watson 4-Hour Rapid Charger for AA and AAA NiMH and NiCd Rechargeable Batteries The 4-Hour Rapid Charger for AA and AAA NiMH and NiCd Rechargeable Batteries from Watson charges two or four AA or AAA batteries (not included). It is compatible with both NiMH and NiCd batteries. Charging time varies from 100-280 minutes, depending upon battery quantity, size, and capacity.
  
  The charger's intelligent Negative Delta-V microprocessor doles out the full charge to each battery, while Zero Slope Detection prevents overcharging. The Safety Guard Timer automatically shuts off after 6 hours in cases where batteries are taking far longer than normal to charge, in order to prevent damage from excessive current.
  
  The charger has two charging level indicator lights to keep you apprised of battery status. Switching 100-240 VAC input power enables use all over the world. The charger's compact outlet prongs fold in, making the unit more compact for storage.
  • Will charge either 2 or 4 AA or AAA batteries (sold separately).
  • Works with batteries that have Nickel-Metal Hydride (NiMH) or Nickel-Cadmium (NiCd) chemistry.
  • Charging time varies based upon battery quantity, size, and capacity. Charging 2 AAA batteries will take about 100 minutes, while 4 AAA's will require about 200 minutes. Charging time for 2 AA batteries with a capacity of about 1800mAh will be roughly 110 minutes, while 4 AA batteries at that capacity will require about 220 minutes. For higher-capacity AA's in the 2400-2500mAh range, 2 batteries will charge in approximately 140 minutes, and 4 batteries will take about 280 minutes.
  • An intelligent Negative Delta-V microprocessor ensures that each battery is charged to its full capacity, while the Zero Slope Detection feature prevents overcharging.
  • Safety Guard Timer will automatically shut off after 6 hours. So in cases where batteries are taking far longer than normal to charge, they will not be exposed to excessive current that could cause damage.
  • Dual charging level indicator lights are red while batteries are charging and turn green when charging is complete. They will flash red if the batteries are not charging properly.
  • Switching 100-240 VAC input power allows you to use the charger all over the world.
  • The compact outlet prongs fold in and out to make the unit smaller for easier storage.
  UPC: 847628532953
• 2 x Watson Case for 4 AA or AAA Batteries (Black) This plastic Watson Battery Storage Case holds up to 4 AA or AAA batteries in dedicated slots. It has a compact form factor for easy storage in your pocket or a small compartment in your gear bag. The case has a snap closure and features an attachment point for connecting a second identical case, which could in turn be connected to another to create a chain, giving you an easy expansion option for storing more batteries. UPC: 847628006782

• 2 x YN685 Wireless TTL Speedlite for Canon Cameras zvuwyzzfcaxvutvxfurxfxrurdxzqys
• Mini Stand
• Protecting Bag
• Limited 1-Year Warranty

• YN-622C-TX E-TTL II Wireless Flash Controller for Canon

• Vello - Softbox for Portable Flash (Large, 8 x 12")

• Watson - MX AA NiMH Batteries (8-Pack, 1.2V, 2550mAh)

• Watson - 4-Hour Rapid Charger for AA and AAA NiMH and NiCd Rechargeable Batteries

• 2 x Watson - Case for 4 AA or AAA Batteries (Black)

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• 2 x Yongnuo YN685 Wireless TTL Speedlite for Canon Cameras

  Mount	Shoe
  Guide No.	196.85' / 60 m ISO 100 at 200 mm Position
  Exposure Control	E-TTL / E-TTL II, Manual
  Vari-Power	1/1 to 1/128
  Bounce Head	-7 to +90°
  Swivel Head	360°
  Coverage	20 - 200 mm (Full Frame)
  Zoom Head	Full Frame: 20 - 200 mm
  Off-Camera Terminal	PC
  Recycle Time	Approximately 3 Seconds
  Flash Duration	200 to 20,000 sec
  Flash-Ready Indicator	Yes
  Compensation	-3 EV to +3 EV (in 1/3 EV steps)
  Wireless Operation	Method: RF Distance: Up to 328.08' / 100 m
  Wireless Communication Channels	7 Channels
  Wireless Groups	6 Groups
  Power Source	4 x AA Alkaline, Rechargeable NiMH Batteries
  Dimensions (W x H x D)	2.6 x 3.0 x 8.3" / 67.0 x 77.0 x 210.0 mm
  Weight	15.03 oz / 426 g

  Box Dimensions (LxWxH)	8.7 x 4.1 x 3.8"

• Yongnuo YN-622C-TX E-TTL II Wireless Flash Controller for Canon

  Channels	7
  Groups	3 (A, B, C)
  Wireless Range	328' / 100 m
  Radio Frequency	2.4 GHz

  Control Modes	Manual, Multi, TTL
  Sync Speed	1/8000 Sec

  Ports	1 x PC Sync 1 x 2.5 mm (Camera Shutter) 1 x Mini-USB

  Bottom Mount	Hot Foot

  Battery Type	2 x AA

  Dimensions	3.5 x 2.1 x 1.5" / 9 x 5.3 x 3.9 cm (Transmitter)
  Weight	2.9 oz / 82.2 g

  Box Dimensions (LxWxH)	5.4 x 4.2 x 2.1"

• Vello Softbox for Portable Flash (Large, 8 x 12")

  Modifier Type	Softbox
  Attachment Method	Strap
  Dimensions	H: 8.0 x W: 12.0" / H: 20.0 x W: 30.0 cm
  Weight	4.0 oz / 113 g

  Box Dimensions (LxWxH)	12.9 x 9.1 x 0.9"

• Watson MX AA NiMH Batteries (8-Pack, 1.2V, 2550mAh)

  Battery Type	8 x AA
  Battery Chemistry	NiMH
  Battery Voltage	1.2 V
  Capacity (mAh)	2550 mAh

  Box Dimensions (LxWxH)	5.984 x 2.756 x 0.551"

• Watson 4-Hour Rapid Charger for AA and AAA NiMH and NiCd Rechargeable Batteries

  AC Input Power	100 to 240 VAC, 50 / 60 Hz
  Power Consumption	10 W
  Charging Bays	4 x AA, AAA
  Supported Battery Chemistry	Ni-Cd, Ni-MH
  Charging Voltage	2.8 VDC
  Charging Amperage	500 mA
  Power Input	2-Prong US Plug
  Charger Dimensions	4.3 x 2.7 x 1.3" / 109.00 x 69.00 x 33.00 mm
  Charger Weight	2.8 oz / 79.4 g

  Operating Temperature	32 to 113°F / 0 to 45°C

  Box Dimensions (LxWxH)	5.3 x 4.0 x 1.4"

• 2 x Watson Case for 4 AA or AAA Batteries (Black)

  Battery Type	4 x AA, AAA
  Material	Plastic
  Closure Type	Snap Fastener
  Dimensions (W x H x D)	2.5 x 2.0 x 0.5" / 6.3 x 5.1 x 1.3 cm
  Weight	0.4 oz / 11 g

  Box Dimensions (LxWxH)	2.0 x 2.0 x 1.0"

Rating

Discussion