User manual
Zacuto Sony FS5 FS5M2 Z-Finder Recoil

User Manual for Zacuto Sony FS5 FS5M2 Z-Finder Recoil with Dual Trigger Grips

• Product category: Camcorder Supports & Rigs Zacuto
• Brand: Zacuto
• Description and content of package
• Technical information and basic settings
• Frequently asked questions – FAQ
• Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
• Authorized service for Zacuto Camcorder Supports & Rigs

Product description

• VCT Pro Baseplate With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.
  
  A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.
  
  The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.
  
  An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.
  Key Features
  • • Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
    • 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
    • VCT14-compatible V-wedge
    • 1/4"-20 and 3/8"-16 tripod mount holes
    • Ergonomic gel polymer shoulder pad
    • 15mm LWS rod adapter on the rear
    • Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
    • ARRI M6 rosette
    • Three 1/4"-20 threaded holes for accessories
    • Includes two 6.5" 15mm rods
    • 1/4"-20 and 3/8"-16 screws supplied
    • Made in the USA
• Sony FS5 / FS5 MK II Dual Trigger Grips The Sony FS5 / FS5 MK II Dual Trigger Grips from Zacuto are a 15mm LWS rod mount handgrip set featuring one wooden handgrip and one grip relocator for the Sony FS5 and FS5 MK II camera grips. Each can be individually rotated a full 360° at the press a dedicated lever — there is no need to screw or unscrew any knob or lever but rather just press it on the fly. Furthermore, the wooden component of the wooden handgrip can also be adjusted forward and backward at the press of another lever, and same goes for your camera grip once you attach it.
  
  The handgrip and relocator are secured into sleeves and can be adjusted in length within the sleeves by loosening a corresponding lever for each one. They can be adjusted from 13 to 16" in length, measuring from the base to the bottom of the handgrip. Scale markings are available on top to allow you to easily match up the positions of the handgrips. The handgrips are fully removable and you can incorporate a second wooden handgrip at a later time to alternate with the relocator.
  Key Features
  • • 15mm LWS rod mount handgrip set
    • Includes a wooden handgrip and a grip relocator for the Sony FS5 / FS5 MK II camera grip
    • 360° rotation at the press of a lever — no screwing/unscrewing
    • Forward/backward adjustment at the press of another lever
    • Length adjustable
    • Scale markings for easily matching the positions of the handgrips
• FS5 Top Plate Offering the ability to seamlessly integrate accessories into the FS5 shooting workflow, the FS5 Top Plate from Zacuto comprises a dedicated plate with a built-in 15mm side-facing rod lock to permit attaching various 15mm rod accessories to the camera. Included with the top plate is a separate 3"-long 15mm rod for mounting accessories, such as the FS5's LCD with attached Z-Finder. Both sides of the top plate also incorporate one 3/8"-16 and five 1/4"-20 threaded mounts, as well as custom-sized screw holes for relocating the Sony cable holder and film plane marker.
• FS5 Z-Finder for Sony FS5 Camera The FS5 Z-Finder for Sony FS5 Camera from Zacuto is made specifically for the monitor that is included with the Sony FS5. It features a magnification factor of two, and a diopter adjustment wheel for tuning the finder to your eye. The flip-up frame slides onto the viewfinder and locks into place. When you want to flip the Z-Finder up and out of the way without removing it, you flip the red lever at the bottom of the frame. A custom-designed and built 40mm optic magnifies the camera's screen, and the rubber eyecup allows you to press your eye comfortably against the viewfinder for added stability when shooting handheld.
  
  The two included extension frames are used when the diopter adjustment is insufficient for people who are farsighted, and can be used one at a time or together. The included mounting bracket positions the Z-Finder for shoulder-mounted shooting. This Z-Finder comes with a lens cap, sun mask, protective boot, and Z-Finder dust cover. Two included replaceable anti-fog disks, one of which comes installed, help prevent the optics from fogging up.
  • Made specifically for the Sony FS5 LCD viewfinder screen
  • Diopter adjustment from -1 to +4
  • Two included extender frames for operators who are farsighted and need additional adjustment
  • Mounting bracket for shoulder-mounted shooting
  • Made in the USA
  UPC: 741459186241
• LANC Extension Cable (13.8") This 13.8" LANC Extension Cable from Zacuto features a right-angle male 2.5mm mini jack and a 2.5mm female plug. This heavy-duty, 24 AWG cable is UL approved and ideal for use with select Zacuto grip relocators.

• 2 x 6.5" 15mm Rods

• 1/4"-20 Camera Screw

• 3/8"-16 Camera Screw

• Limited Lifetime Warranty

• Dual Trigger Grip Base

• Wooden Handgrip

• Sony FS5 / FS5 Mark II Grip Relocator

• Limited Lifetime Warranty

• 15mm F/F Rod (3")

• Limited Lifetime Warranty

• 2 x Extender Frames

• Flip-Up Mounting Frame

• FS5 Mounting Bracket

• Lens Cap

• Z-Finder 16 x 9 Sun Mask

• Protective Boot

• Z-Finder Dust Cover

• 2 x Anti-Fog Discs (One Installed)

• Limited Lifetime Warranty

• Limited 1-Year Warranty

Upload User Manual

Please enter here the link to the user manual of this product: OR Enter here the file with the user manual of this product from your computer/phone: (60MB max; Permitted formats: PDF) 0%

Technical parameters

• VCT Pro Baseplate

  Mount Types	VCT14-compatible V-wedge 15 mm LWS rod ports in front and back 1/4"-20 and 3/8"-16 tripod mount holes 1/4"-20 and 3/8"-16 camera screws included 6.5" (16.5 cm) 15mm rods included ARRI M6 rosette Three 1/4"-20 threaded holes for accessories
  Dimensions	14.25 x 4.25 x 2" (36.2 x 10.8 x 5 cm) (with included 6.5"/16.5 cm rods)
  Weight	2.1 lb (0.96 kg)

  Box Dimensions (LxWxH)	10.75 x 7.4 x 3.45"

• Sony FS5 / FS5 MK II Dual Trigger Grips

  Material of Construction

  Aluminum, wood

  Box Dimensions (LxWxH)	11.35 x 9.4 x 3.05"

• FS5 Top Plate

  Box Dimensions (LxWxH)	6.1 x 4.2 x 1.5"

• FS5 Z-Finder for Sony FS5 Camera

  Magnification Factor	2x
  Diopter Adjustment	-1 to +4

  Box Dimensions (LxWxH)	10.7 x 7.2 x 3.7"

• LANC Extension Cable (13.8")

  Connectors	2.5 mm (male), 2.5 mm (female)
  Cable Length	13.8" / 35 cm

  Box Dimensions (LxWxH)	6.0 x 3.0 x 0.02"

Rating

Discussion