|
User Manual for ZeeVee ZyPerMX IP Encoder Click to enlarge the picture
Contents of the user manual for the ZeeVee ZyPerMX IP Encoder
- Product category: RF Equipment ZeeVee
- Brand: ZeeVee
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for ZeeVee RF Equipment
|
User manual for the ZeeVee ZyPerMX IP Encoder contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any ZeeVee product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official ZeeVee user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a ZeeVee product will considerably shorten its lifespan!
|
Product description The ZyPerMX IP Encoder from ZeeVee is a hardware platform designed to encode and distribute video over a Local Area Network. It supports resolutions up to 1080p Full HD and 1920 x 1200 @ 60 Hz. It supports up to 8 channels of embedded audio and supports Dolby Digital, MPEG-1 audio, and LPCM audio streams. It communicates directly with each encoder using the built-in web server or Telnet protocol, providing full access to configuration parameters, control, and features. Once connected to the network, the IP settings on the encoder can be configured automatically by a DHCP server or can be entered manually in static mode. It supports both multicast and unicast UDP and RTP data connections.
You can input your HDMI source into the ZyPerMX encoder, and it will convert your video into a standard H.264 IP stream up to 1920 x 1200 @ 60 Hz. Using multicast mode, you can send audio and video content to an unlimited ZeeVee MXE set-top boxes or other H.264 compatible players. The encoder can be easily set up using the built-in HTML browser pages or with a third-party controller using standard Telnet commands. - Supports input video formats up to 1920 x 1200 @ 60 Hz
- Support for encoded video bitrate up to 30 Mbps
- Support for up to 4 RTSP clients simultaneously
- Easy to configure and manage
- Can be configured with either static IP and DHCP network address methods
- Can also be setup to show an idle pattern picture when no video is received
UPC: 812254011349 In the Box ZeeVee ZyPerMX IP Encoder Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the ZeeVee ZyPerMX IP Encoder in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersZeeVee ZMXENC1 Specs | Video | Connector: 1 x HDMI Type A, female Formats: 640 x 480 @ 60 Hz 800 x 600 @ 60 Hz 1024 x 768 @ 60 Hz 1280 x 768 @ 60 Hz 1280 x 800 @ 60 Hz 1280 x 1024 @ 60 Hz 1360 x 768 @ 60 Hz 1366 x 768 @ 60 Hz 1440 x 900 @ 60 Hz 1400 x 1050 @ 60 Hz 1600 x 1200 @ 60 Hz 1680 x 1050 @ 60 Hz 1920 x 1200 @ 60 Hz 720 x 480 (480p) @ 60 Hz 720 x 576 (576p) @ 50 Hz 1280 x 720 (720p) @30 Hz 1280 x 720 (720p) @50 Hz 1280 x 720 (720p) @60 Hz 1920 x 1080 (1080p) @24 Hz 1920 x 1080(1080p) @25 Hz 1920 x 1080 (1080p) @30 Hz 1920 x 1080 (1080p) @50 Hz 1920 x 1080 (1080p) @60 Hz | Audio | Formats: Supports up to 8 channels of embedded audio Linear PCM MPEG-1 Audio Layer 2 Dolby Digital | | LAN | Connector: 1 x RJ-45 (PoE), shielded
Formats: 640 x 480 @ 60 Hz 800 x 600 @ 60 Hz 1024 x 768 @ 60 Hz 1280 x 768 @ 60 Hz 1280 x 800 @ 60 Hz 1280 x 1024 @ 60 Hz 1360 x 768 @ 60 Hz 1366 x 768 @ 60 Hz 1440 x 900 @ 60 Hz 1400 x 1050 @ 60 Hz 1600 x 1200 @ 60 Hz 1680 x 1050 @ 60 Hz 1920 x 1200 @ 60 Hz 720 x 480 (480p) @ 60 Hz 720 x 576 (576p) @ 50 Hz 1280 x 720 (720p) @ 30 Hz 1280 x 720 (720p) @ 50 Hz 1280 x 720 (720p) @ 60 Hz 1920 x 1080 (1080p) @ 24 Hz 1920 x 1080 (1080p) @ 50 Hz 1920 x 1080(1080p) @ 25 Hz 1920 x 1080 (1080p) @ 60 Hz 1920 x 1080 (1080p) @ 30 Hz | Formats | Pass-through audio (not converted) | | Video Encoding | Output: H.264/MPEG-4 AVC | Audio Encoding | Output: LPCM, AAC, MPEG-1 L2 | Bit Rate | Output: 2 to 30 Mbps | Power Input | 12 VDC, locking | Maximum Cable Distance | Up to 328' (100 m) | Humidity | Operating / Storage Humidity: 20 to 90% (non-condensing) | Operating Temperature | 32 to 104°F (0 to 40°C) | Storage Temperature | -4 to 176°F (-20 to 80°C) | Weight | Not specified by the manufacturer | Dimensions (L x W x H) | 8.66 x 9.45 x 1.71" (220 x 240 x 43.5 mm) |
Rating70% users recommend this product to others. And what about you?

This product has already been rated by 08 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
CYBERPOWERPC GMA6200BSTV2... FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
... Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
... Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f... zzstar camera binoculars model DT16...
|
|