|
User Manual for Arecont Vision SurroundVideo G5 20MP Outdoor Vandal-Resistant IP Dome Camera Click to enlarge the picture
Contents of the user manual for the Arecont Vision SurroundVideo G5 20MP Outdoor
- Product category: Wired IP Cameras Arecont Vision
- Brand: Arecont Vision
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Arecont Vision Wired IP Cameras
|
User manual for the Arecont Vision SurroundVideo G5 20MP Outdoor contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Arecont Vision product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Arecont Vision user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Arecont Vision product will considerably shorten its lifespan!
|
Product description The Arecont Vision SurroundVideo G5 20MP IP Dome Camera comes with four 5MP sensors, each with a 2560 x 1920 resolution, for a total resolution of 20MP. It features four factory-installed 6.7mm fixed lenses for improved depth of field and image clarity to provide precise performance from each individual sensor.
For added flexibility, users can view the camera’s four sensors individually or as a smooth transition of all images blended together for a full 180° panoramic view. The camera is factory-aligned with a slight image overlap to ensure you never miss a thing. For an optimal image, each sensor can be adjusted individually for the optimum exposure ratio per sensor.
Equipped with a day/night mechanical IR cut filter, the camera is suitable for applications with challenging lighting conditions. Once mounted, the operator can focus the camera remotely, eliminating the need to adjust the camera on-site.
Enclosed in an IP66-rated housing, the camera is suitable for use in both indoor and outdoor applications. The IK10-rated dome housing is suitable for withstanding vandalism, since it can withstand the equivalent of 120 lb of force. The camera is also PoE-capable to minimize cable installation. - Individual or seamless situational awareness
- True day/night functionality with mechanical IR cut filter
- Privacy Mask, Motion Detection, Flexible Cropping, Bit Rate Control, and Multi-Streaming
- Four integrated motorized 6.7mm P-iris lenses with remote focus
- Easily adjustable two-axis camera gimbals with 360° pan and 90° tilt
- ±5° electrical vertical alignment to locate each sensor position
- Binning mode for strong low-light performance
In the Box Arecont Vision SurroundVideo G5 20MP Outdoor Vandal-Resistant IP Dome Camera Mounting Template 4 x Mounting Wood Screw 4 x Mounting Dry Wall Anchor RJ45 Female to Female Coupler Security L-Key Hex Key Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Arecont Vision SurroundVideo G5 20MP Outdoor Vandal-Resistant IP Dome Camera in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersArecont Vision AV20585 Specs | Image Sensor | 4 x 5 MP, 1/2.5" CMOS | | Horizontal Field-of-View | 180° | | Pixel Pitch | 2.2 μm | | Minimum Illumination | Color (Day Mode): 0.3 lux
Color Binning (Day Mode): 0.15 lux
B/W (Night Mode): 0.02 lux, IR sensitive | | Resolutions | Full Field of View:
Total: 10,240 (H) x 1920 (V)
Per Sensor: 2560 (H) x 1920 (V)
1/4 Resolution:
Total: 5120 (H) x 960 (V)
Per Sensor: 1280 (H) x 960 (V) | | Dynamic Range | 70.1 dB | | Frame Rates | At Max Resolution: 7 fps (10,240 x 1920)
1/4" Resolution: 10 fps (5120 x 960)
Binning Mode: 24 fps (5120 x 960) | | | | Lens Type | 4 x Remote focus P-iris, IR-corrected lens | | Focal Length | 6.7mm | | Aperture | f/1.2 | | Horizontal Field-of-View | 47° | | Lens Mount | CS | | Maximum Distance | Distance to Pixel Density:
30 ppf (98 ppm): 105' / 32 m
60 ppf (197 ppm): 51' / 15.5 m
90 ppf (295 ppm): 32.5' / 9.9 m | | | | Optics | Remote focus and P-iris control | | Low Light Capability | Pixel Binning mode | | Picture-in-Picture | Simultaneous delivery of full field of view and zoomed images | | Shutter Speed | Programmable; controls motion blur | | Motion Detection | Real-time, 1024 detection zones per sensor | | Privacy Masking | 1024 zones (per sensor) | | Cropping | Flexible: Resolution windowing down to 1x1 pixel for JPEG and 2x2 pixels for H.264 | | Backlight Compensation | Supported | | Flicker Frequency | 50/60 Hz selectable | | Position Sensor | ±5° Digital Vertical Alignment to adjust images | | Image Rotation | 180° image flip | | Efficiency | Bit rate and bandwidth limitation control
Bandwidth and storage savings by running at 1/4 resolution | | Sharpness | Selectable enhancement level | | Additional Features | Programmable resolution, brightness, saturation, gamma, tint
Electronic pan, tilt, zoom (PTZ) | | | | Compression | H.264 (MPEG-4, Part 10) / MJPEG
21 levels of quality | | Network Protocols | RTSP, RTP/TCP, RTP/UDP, HTTP, DHCP, TFTP, IPv4 | | Network Interface | 100Base-T Ethernet | | Multi-Streaming | 8 non-identical streams (2 per sensor) | | | | Listings | UL (CB) | | FCC Compliance | 47 CFR 15 Class A | | Environmental | RoHS, REACH, WEEE | | Marking | (CE) EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3, EN60950-1, IK10 (EN62262), IP66 (EN60529) | | | | Operating Temperature | -40 to 122°F / -40 to 50°C with heater
32 to 122°F / 0 to 50°C without heater
Motorized Lens: -4 to 122°F / -20 to 50°C | | Humidity | 0 to 90% (non-condensing) | | Storage Temperature | -40 to 140°F / -40 to 60°C | | Heater | Switch On/Off:
On: 62.6°F / 17°C
Off: 86°F / 30°C | | Rating | IP66 and IK10 | | | | Alarm Input / Output | General purpose opto-coupled, 1 input / 1 output | | Power Over Ethernet | PoE 802.3af, Class 3 | | Power Input | Auxiliary: 18 to 48 VDC, 24 VAC
Heater: 12 to 35 VDC / 24 VAC (separate power required, not included) | | Maximum Power Consumption | Auxiliary: 13.9 W
Heater: 11 W (DC) / 13 W (AC) | | | | Casing | Die-cast aluminum chassis with 5.5" / 140 mm polycarbonate dome bubble | | Gimbal | Adjustable, 2-axis with 360° pan, 90° tilt | | Dimensions (Ø x H) | Camera: 6.9 x 6.55" / 175 x 166 mm
Bubble Only: 5.5 x 3.4" / 140 x 87 mm | | Weight | 3.54 lb / 1.6 kg | | | | Package Weight | 4.7 lb | | Box Dimensions (LxWxH) | 9.1 x 8.9 x 8.6" |
Rating80% users recommend this product to others. And what about you?
This product has already been rated by 87 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
| Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
NEWER F100 CAMERA MONITOR...
PhotoStage progessional...
powerpint...
Night Detective Quest 5M 5x Night Vision Monocular ...
Ibanez AM93QM User Manual....
|
| Discussion |
Latest contributions to the discussion:
TR-P5TP pink robot dog
Name: Allyson
Top Race Race & Remote Control
Hello we are having issues with the remote to the robot dog it just flashes a red light will not sync to the robot dog what so ever the dog is charged and batteries have been changed out more the once, Can i get help trouble shooting the issue or if something needs to be sent bac...
Query
Name: Libba Guyton
Canon Pixma TS9520 Wireless All-In-One Printer
Support Code 1851
Multi purpose tray guide is open. Close the guide and press OK.
Done and the same message continue to appear....
Manual
Name: Grant
Konus KonuStart-700B 60mm f 11.6 Refractor
Please send user manual for Konustart-700B to above email address....
Fs3x manual
Name: Randy Reid
DigiTech FS3X Three-Function Foot Switch
I need manual
...
adding additional chime
Name: Stan Stansfield
OhmKat Video Doorbell Power Supply for
The additional chime does not work and is closure to the transmitter then the first one. I plugged in the additional chime and set the volume and chime. The original chime works when the additional chime is plugged in to new location. The original chime is located further away bu...
|
|
