User Manual for Axis Communications A9188-VE Network I O Relay Module Click to enlarge the picture
Contents of the user manual for the Axis Communications A9188-VE Network I O
- Product category: Relay Boards Axis Communications
- Brand: Axis Communications
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Axis Communications Relay Boards
|
User manual for the Axis Communications A9188-VE Network I O contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Axis Communications product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Axis Communications user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Axis Communications product will considerably shorten its lifespan!
|
Product description Designed for floor access management, the A9188-VE Network I/O Relay Module from Axis Communications has 8 inputs/outputs to connect up to eight network devices to your system. This module is suited to integrate into your system to supply power to devices such as PIR motions sensors, switches, and more to trigger actions, responses, or alerts through the system. It features 12/24 VDC output/input or PoE+ to power compatible network devices and is compatible with Axis Camera Station or third-party software. The module is enclosed in an IP66- and IK10-rated housing for protection against dust, water and impact. - Eight inputs/output with supervised inputs and eight form-C relays
- IP66- and IK10-rated with UL294-approved enclosure
- 12 and 24 VDC output or PoE+
- Open API with support for Axis VAPIX, ACAP, Axis Camera Station, and third-party software
In the Box Axis Communications A9188-VE Network I/O Relay Module Connector Kit Jumper Kit Torx Key TR20 Limited 3-Year Warranty Table of Contents
|
Upload User Manual
Have you got an user manual for the Axis Communications A9188-VE Network I O Relay Module in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersAxis Communications 0831-001 Specs | | | Digital I/O | 8 x I/O, configurable as input, supervised input with analog read-out or output
Digital Input: 0 to 40 VDC maximum, possible to supervise between 0-12 V (4 states)
Digital Output: 0 to 40 VDC maximum, open drain, 100 mA maximum | | Relays | 8 x form-C relays, NO/NC contacts, 1 A maximum, 48 VDC, 30 VDC maximum outdoors | | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication | | Supported Protocols | IPv4, IPv6, HTTP, HTTPS, TLS, QoS layer 3 DiffServ, FTP, SFTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | | Application Programming Interface | Open API for software integration including VAPIX | | Tamper Detection | Dedicated tamper input for external tamper contact(s) | | Event History | 30,000, first in, first out (FIFO) | | Event Action | Notification via email, HTTP, HTTPS and TCP, External output port, status LED | | Event Trigger | Tamper detection, network lost, configuration, event logger, hardware, input signal, schedule, system, time, supervised inputs (4 states), relays and outputs, heartbeat lost | | Sustainability | PVC-free | | Software | Configuration and basic management through Internet Explorer, Firefox, Chrome, or Safari | | Memory | 256 MB RAM, 256 MB flash | | Power Input | 8-28 VDC, 26 W maximum or PoE IEEE 802.3af Type 1 Class 3 or IEEE 802.3at Type 2 Class 4 | | Power Output | 12 and 24 VDC
Maximum power out shared between 12 and 24 VDC outputs:
PoE Class 3: 3.6 W
PoE Class 4/DC Input: 12 W | | Connectors | RJ45 10BASE-T/100BASE-TX
Terminal blocks: 1 x DC IN, 2 x DC out, 8 x inputs/outputs, 8 x relays, 1 x tamper, 1 x RS-485 (for future use)
Cable Size for Connectors: CSA: AWG 28-16, CUL/UL: AWG 30-14 | | Approvals | EN 55022 Class B, EN 50130-4, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, C-tick AS/NZS CISPR22 Class B, VCCI Class B, IEC/EN/UL 60950-1, UL 294, UL 2043, EN 50581 | | Languages | English, French, Italian, German, and Spanish | | Operating Temperature | -22 to 131°F (-30 to 55°C) | | Operating Humidity | 20-85%, non-condensing | | Dimensions | 14.2 x 11.1 x 5.2" (361 x 282 x 131 mm) | | Weight | 11 lb (5 kg) |
Rating100% users recommend this product to others. And what about you?
This product has already been rated by 45 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
