|
Ikegami DE-811 NTSC 3-Input Board |
The Ikegami DE-811 is a 3-comb filter add-on board for the HTM-1050 LCD monitor. The comb filter enhances standard-definition signals when they are displayed on high definition displays. Since the native resolution of LCD monitors tend to be much higher than standard definition NTSC or PAL video, an additional comb filter provides users with the b...
|
|
Chief FSA-1015B 19" Equipment Rack SFP |
The Chief FSA-1015B 19" Equipment Rack SFP Mount (Black) provides ultimate flexibility when mounting small flat panel (SFP) monitors into a rack system. Designed to fit within a standard 19" rack system, the FSA-1015B can be combined with other Chief SFP monitor mounts for specific application needs. Convenient Design Designed to fit ...
|
|
Sony MB-531 Dual Rack Mount Adapter |
The Sony MB-531 Dual Rack Mount Adapter is a rack adapter used to hold two Sony LMD-940W professional broadcast monitors side-by-side within a normal EIA 19" rack. The MB-531 has an adjustable position for the viewing angle of the monitors, and if you only need to install a single monitor there's also an optionally-available blank panel to block o...
|
|
DIT MMR-B106W 10.6" Ruggedized LCD Monitor |
The Display Integration Technologies MMR-B106W is a 10.6" ruggedized LCD monitor built to withstand a variety of unpredictable environments. With its aluminum shell, the LCD is ideal for field monitoring, broadcast, military, and industrial applications.The monitor is equipped with a 2mm anti-reflective coating making it incredibly effective even ...
|
|
DIT MMR-B153W 15.3" Ruggedized LCD Monitor |
The Display Integration Technologies MMR-B153W is a 15.3" ruggedized LCD monitor built to withstand a variety of unpredictable environments. With its aluminum shell, the LCD is ideal for field monitoring, broadcast, military, and industrial applications. With its wide variety of inputs and outputs and multiple battery adapters, the MMR-B153W will ...
|
|
Kaiser Accessory Shoe with Tripod Mount |
This adapter has a 1/4"-20 threaded screw on the bottom and "cold" flash shoe on the top, and is designed for use with an auxiliary flash or accessory. The pictured knurled locking ring affixes this shoe to the device you screw it in to. It is ideally suited for use with any tripod or light stand with a 1/4"-20 threaded socke...
|
|
Impact Adhesive-Backed Accessory Shoe |
This Adhesive-Backed Accessory Shoe (2-Pack) is a replacement part for the Impact PowerSync remote control system. The accessory shoe can be mounted on the DC version of the remote control receiver, allowing you to use most major brands of flash, either on-camera or remotely. UPC: 847628012318 In the Box Impact Adhesive-Backed Accessory Shoe (2-Pa...
|
|
Astro Design Inc IM-303 RGB D-SUB |
The IM-303 RGB D-SUB Module for DM-3024 from Astro Design is an input module designed for use with the DM-3024 24" Native HD LCD Monitor. The module allows the monitor to accept (1) RGB input signal. It is compliant with the following VESA standards: WUXGA, UXGA, SXGA, WXGA, XGA, SVGA, and VGA. Module for DM-3024 24" Native HD LCD Monitor Use t...
|
|
ikan SH17 Sun Hood |
The Ikan SH17 is a sunshade hood designed specifically for the V17 17" monitor. This shade will provide shading to the screen when in direct sunlight, brightly lit conditions, as well as protecting against light spilling. UPC: 847983005864 In the Box ikan SH17 Sun Hood 90-Day Warranty Table of Contents ...
|
|
DIT MMR-B153W 15.3" Ruggedized LCD Monitor |
The Display Integration Technologies MMR-B153W is a 15.3" ruggedized LCD monitor built to withstand a variety of unpredictable environments. With its aluminum shell, the LCD is ideal for field monitoring, broadcast, military, and industrial applications. With its wide variety of inputs and outputs and multiple battery adapters, the MMR-B153W will ...
|
|
