|
User Manual for Spektrum VR5203 Dual Output Regulator Click to enlarge the picture
Contents of the user manual for the Spektrum VR5203 Dual Output Regulator
- Product category: Remote Control Components Spektrum
- Brand: Spektrum
- Description and content of package
- Technical information and basic settings
- Frequently asked questions – FAQ
- Troubleshooting (does not switch on, does not respond, error message, what do I do if...)
- Authorized service for Spektrum Remote Control Components
|
User manual for the Spektrum VR5203 Dual Output Regulator contain basic instructions
that need to be followed during installation and operation.
Before starting your appliance, the user manual should be read through carefully.
Follow all the safety instructions and warnings, and be guided by the given recommendations.
User manual is an integral part of any Spektrum product,
and if it is sold or transferred, they should be handed over jointly with the product.
Following the instructions for use is an essential prerequisite for protecting
health and property during use, as well as recognition of liability on the part of the manufacturer
for possible defects should you make a warranty claim. Download an official Spektrum user manual in which you will find instructions on how to install, use, maintain and service your product.
And do not forget – unsuitable use of a Spektrum product will considerably shorten its lifespan!
|
Product description The VR5203 Dual Output Regulator from Spektrum provides regulated voltage protection for up to two servo functions with two input ports and two output ports. It is designed to eliminate the risk of higher voltage power systems damaging standard voltage servos while allowing the rest of the flight system to work at the higher voltage. The regulator is primarily designed for use with gyros in helicopters, as many types of gyros and tail rotor servos have voltage limits of 6 VDC or less. The Dual Output Regulator installs between the receiver and the gyro in the rudder and gain channels and regulates the voltage to the gyro and tail rotor servo to a constant 5.2 VDC. This allows the rest of the system to operate using higher voltage, typically 5-cell NiMH 6V or even 2-cell LiPo 7.4V.
It can also be used with many other devices that are typically installed in models that have voltage limits. These include some types of retract servos (including the JR791), which have a limited voltage.
Note: The Dual Voltage Regulator is limited to 2 amps of continuous current. It is designed to install between the receiver and the gyro, operating the gyro and tail rotor servo only (or other control devices like a retract servo, electronic switch, etc.). It is not intended to be installed between the battery and the receiver to power the entire system. - Use higher voltage power systems with lower voltage servos
- Two inputs/two outputs distribute the load over two connectors to minimize drops in high-current draw applications
- Supports an input voltage of 5.5 to 10 VDC and a continuous current of 2 amps (3 amps peak)
UPC: 605482002124 Table of Contents
|
Upload User Manual
Have you got an user manual for the Spektrum VR5203 Dual Output Regulator in electronic form? Please send it to us and help us expand our library of instruction manuals.
Thank you, too, on behalf of other users.
To upload the product manual, we first need to check and make sure you are not a robot. After that, your "Submit Link" or "Upload File" will appear.
Technical parametersSpektrum SPMVR5203 Specs Type | Dual input / dual output step-down linear voltage regulator | Maximum Current | Continuous: 2.0 A Peak 3 A | Input Voltage | 5.5 to 10 VDC (4- to 8-cell NiCd/NiMH or 2-cell LiPo) | Output Voltage | 5.2 VDC | Dimensions | 0.9 x 1.3 x 0.5" / 23 x 32 x 12 mm | Weight | 0.3 oz / 7 g | | Package Weight | 0.2 lb | Box Dimensions (LxWxH) | 7.1 x 5.3 x 1.7" |
Rating70% users recommend this product to others. And what about you?

This product has already been rated by 18 owners. Add your rating and experience with the product.
Discussion
Ask our technicians if you have a problem with your settings,
or if anything is unclear in the user manual you have downloaded.
You can make use of our moderated discussion.
The discussion is public and helps other users of our website who may be encountering similar problems.
The discussion is empty - enter the first post
Post a new topic / query / comment:
|
|
|
Request for user manual |
You can’t find the operation manual you are looking for? Let us know and we will try to add the missing manual:
I’m looking for a manual / Request for manual
Current requests for instruction manuals:
pocket quadcopter RIV-YT320... CYBERPOWERPC GMA6200BSTV2... FUJINON ERD-30A-D01A ZOOM DEMAND CONTROLLER
... Just bought from Bestbuy Cyberpower,GMA5600BSTV4,model C series
another number on the label ET8252-10294
CECModel:CS450217MB492126 mfg date 043025
... Vortex crossfire ii 6-24x50
I essentially want to return my scope to mechanical zero. This has been on a couple rifles and I would like to set f...
|
|